diff options
| author |  Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
| commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
| tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /arch/arm/boot/dts/dm814x.dtsi | |
| download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip | |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'arch/arm/boot/dts/dm814x.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/dm814x.dtsi | 788 |
1 files changed, 788 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi new file mode 100644 index 000000000..a8cd724ce --- /dev/null +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <dt-bindings/bus/ti-sysc.h> +#include <dt-bindings/clock/dm814.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/dm814x.h> + +/ { + compatible = "ti,dm814"; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + + aliases { + i2c0 = &i2c1; + i2c1 = &i2c2; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + ethernet0 = &cpsw_emac0; + ethernet1 = &cpsw_emac1; + usb0 = &usb0; + usb1 = &usb1; + phy0 = &usb0_phy; + phy1 = &usb1_phy; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0>; + }; + }; + + pmu { + compatible = "arm,cortex-a8-pmu"; + interrupts = <3>; + }; + + /* + * The soc node represents the soc top level view. It is used for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + usb: usb@47400000 { + compatible = "ti,am33xx-usb"; + reg = <0x47400000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + ti,hwmods = "usb_otg_hs"; + + usb0_phy: usb-phy@47401300 { + compatible = "ti,am335x-usb-phy"; + reg = <0x47401300 0x100>; + reg-names = "phy"; + ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; + }; + + usb0: usb@47401000 { + compatible = "ti,musb-am33xx"; + reg = <0x47401400 0x400 + 0x47401000 0x200>; + reg-names = "mc", "control"; + + interrupts = <18>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb0_phy>; + + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 4 0 &cppi41dma 5 0 + &cppi41dma 6 0 &cppi41dma 7 0 + &cppi41dma 8 0 &cppi41dma 9 0 + &cppi41dma 10 0 &cppi41dma 11 0 + &cppi41dma 12 0 &cppi41dma 13 0 + &cppi41dma 14 0 &cppi41dma 0 1 + &cppi41dma 1 1 &cppi41dma 2 1 + &cppi41dma 3 1 &cppi41dma 4 1 + &cppi41dma 5 1 &cppi41dma 6 1 + &cppi41dma 7 1 &cppi41dma 8 1 + &cppi41dma 9 1 &cppi41dma 10 1 + &cppi41dma 11 1 &cppi41dma 12 1 + &cppi41dma 13 1 &cppi41dma 14 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + usb1: usb@47401800 { + compatible = "ti,musb-am33xx"; + reg = <0x47401c00 0x400 + 0x47401800 0x200>; + reg-names = "mc", "control"; + interrupts = <19>; + interrupt-names = "mc"; + dr_mode = "otg"; + mentor,multipoint = <1>; + mentor,num-eps = <16>; + mentor,ram-bits = <12>; + mentor,power = <500>; + phys = <&usb1_phy>; + + dmas = <&cppi41dma 15 0 &cppi41dma 16 0 + &cppi41dma 17 0 &cppi41dma 18 0 + &cppi41dma 19 0 &cppi41dma 20 0 + &cppi41dma 21 0 &cppi41dma 22 0 + &cppi41dma 23 0 &cppi41dma 24 0 + &cppi41dma 25 0 &cppi41dma 26 0 + &cppi41dma 27 0 &cppi41dma 28 0 + &cppi41dma 29 0 &cppi41dma 15 1 + &cppi41dma 16 1 &cppi41dma 17 1 + &cppi41dma 18 1 &cppi41dma 19 1 + &cppi41dma 20 1 &cppi41dma 21 1 + &cppi41dma 22 1 &cppi41dma 23 1 + &cppi41dma 24 1 &cppi41dma 25 1 + &cppi41dma 26 1 &cppi41dma 27 1 + &cppi41dma 28 1 &cppi41dma 29 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7", + "rx8", "rx9", "rx10", "rx11", "rx12", "rx13", + "rx14", "rx15", + "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "tx8", "tx9", "tx10", "tx11", "tx12", "tx13", + "tx14", "tx15"; + }; + + cppi41dma: dma-controller@47402000 { + compatible = "ti,am3359-cppi41"; + reg = <0x47400000 0x1000 + 0x47402000 0x1000 + 0x47403000 0x1000 + 0x47404000 0x4000>; + reg-names = "glue", "controller", "scheduler", "queuemgr"; + interrupts = <17>; + interrupt-names = "glue"; + #dma-cells = <2>; + /* For backwards compatibility: */ + #dma-channels = <30>; + dma-channels = <30>; + #dma-requests = <256>; + dma-requests = <256>; + }; + }; + + /* + * See TRM "Table 1-317. L4LS Instance Summary" for hints. + * It shows the module target agent registers though, so the + * actual device is typically 0x1000 before the target agent + * except in cases where the module is larger than 0x1000. + */ + l4ls: l4ls@48000000 { + compatible = "ti,dm814-l4ls", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48000000 0x2000000>; + + i2c1: i2c@28000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + reg = <0x28000 0x1000>; + interrupts = <70>; + }; + + elm: elm@80000 { + compatible = "ti,814-elm"; + ti,hwmods = "elm"; + reg = <0x80000 0x2000>; + interrupts = <4>; + }; + + gpio1: gpio@32000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + ti,gpio-always-on; + reg = <0x32000 0x2000>; + interrupts = <96>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@4c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + ti,gpio-always-on; + reg = <0x4c000 0x2000>; + interrupts = <98>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@1ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + ti,gpio-always-on; + reg = <0x1ac000 0x2000>; + interrupts = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@1ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + ti,gpio-always-on; + reg = <0x1ae000 0x2000>; + interrupts = <62>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c2: i2c@2a000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + reg = <0x2a000 0x1000>; + interrupts = <71>; + }; + + mcspi1: spi@30000 { + compatible = "ti,omap4-mcspi"; + reg = <0x30000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <65>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi1"; + dmas = <&edma 16 0 &edma 17 0 + &edma 18 0 &edma 19 0 + &edma 20 0 &edma 21 0 + &edma 22 0 &edma 23 0>; + + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; + }; + + mcspi2: spi@1a0000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a0000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <125>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi2"; + dmas = <&edma 42 0 &edma 43 0 + &edma 44 0 &edma 45 0>; + dma-names = "tx0", "rx0", "tx1", "rx1"; + }; + + /* Board must configure dmas with edma_xbar for EDMA */ + mcspi3: spi@1a2000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a2000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <126>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi3"; + }; + + mcspi4: spi@1a4000 { + compatible = "ti,omap4-mcspi"; + reg = <0x1a4000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <127>; + ti,spi-num-cs = <4>; + ti,hwmods = "mcspi4"; + }; + + timer1_target: target-module@2e000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x2e000 0x4>, + <0x2e010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&timer1_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2e000 0x1000>; + + timer1: timer@0 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x0 0x400>; + interrupts = <67>; + ti,timer-alwon; + clocks = <&timer1_fck>; + clock-names = "fck"; + }; + }; + + uart1: serial@20000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart1"; + reg = <0x20000 0x2000>; + clock-frequency = <48000000>; + interrupts = <72>; + dmas = <&edma 26 0 &edma 27 0>; + dma-names = "tx", "rx"; + }; + + uart2: serial@22000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart2"; + reg = <0x22000 0x2000>; + clock-frequency = <48000000>; + interrupts = <73>; + dmas = <&edma 28 0 &edma 29 0>; + dma-names = "tx", "rx"; + }; + + uart3: serial@24000 { + compatible = "ti,am3352-uart", "ti,omap3-uart"; + ti,hwmods = "uart3"; + reg = <0x24000 0x2000>; + clock-frequency = <48000000>; + interrupts = <74>; + dmas = <&edma 30 0 &edma 31 0>; + dma-names = "tx", "rx"; + }; + + timer2_target: target-module@40000 { + compatible = "ti,sysc-omap4-timer", "ti,sysc"; + reg = <0x40000 0x4>, + <0x40010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&timer2_fck>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x40000 0x1000>; + + timer2: timer@0 { + compatible = "ti,dm814-timer"; + reg = <0 0x1000>; + interrupts = <68>; + clocks = <&timer2_fck>; + clock-names = "fck"; + }; + }; + + timer3: timer@42000 { + compatible = "ti,dm814-timer"; + reg = <0x42000 0x2000>; + interrupts = <69>; + ti,hwmods = "timer3"; + }; + + mmc1: mmc@60000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + dmas = <&edma 24 0 + &edma 25 0>; + dma-names = "tx", "rx"; + interrupts = <64>; + interrupt-parent = <&intc>; + reg = <0x60000 0x1000>; + }; + + rtc: rtc@c0000 { + compatible = "ti,am3352-rtc", "ti,da830-rtc"; + reg = <0xc0000 0x1000>; + interrupts = <75 76>; + ti,hwmods = "rtc"; + }; + + mmc2: mmc@1d8000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + dmas = <&edma 2 0 + &edma 3 0>; + dma-names = "tx", "rx"; + interrupts = <28>; + interrupt-parent = <&intc>; + reg = <0x1d8000 0x1000>; + }; + + control: control@140000 { + compatible = "ti,dm814-scm", "simple-bus"; + reg = <0x140000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x140000 0x20000>; + + scm_conf: scm_conf@0 { + compatible = "syscon", "simple-bus"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x800>; + + phy_gmii_sel: phy-gmii-sel { + compatible = "ti,dm814-phy-gmii-sel"; + reg = <0x650 0x4>; + #phy-cells = <1>; + }; + + scm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scm_clockdomains: clockdomains { + }; + }; + + usb_ctrl_mod: control@620 { + compatible = "ti,am335x-usb-ctrl-module"; + reg = <0x620 0x10 + 0x648 0x4>; + reg-names = "phy_ctrl", "wakeup"; + }; + + edma_xbar: dma-router@f90 { + compatible = "ti,am335x-edma-crossbar"; + reg = <0xf90 0x40>; + #dma-cells = <3>; + dma-requests = <32>; + dma-masters = <&edma>; + }; + + /* + * Note that silicon revision 2.1 and older + * require input enabled (bit 18 set) for all + * 3.3V I/Os to avoid cumulative hardware damage. + * For more info, see errata advisory 2.1.87. + * We leave bit 18 out of function-mask and rely + * on the bootloader for it. + */ + pincntl: pinmux@800 { + compatible = "pinctrl-single"; + reg = <0x800 0x438>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x307ff>; + }; + + usb1_phy: usb-phy@1b00 { + compatible = "ti,am335x-usb-phy"; + reg = <0x1b00 0x100>; + reg-names = "phy"; + ti,ctrl_mod = <&usb_ctrl_mod>; + #phy-cells = <0>; + }; + }; + + prcm: prcm@180000 { + compatible = "ti,dm814-prcm", "simple-bus"; + reg = <0x180000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x180000 0x2000>; + + prcm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prcm_clockdomains: clockdomains { + }; + }; + + /* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */ + pllss: pllss@1c5000 { + compatible = "ti,dm814-pllss", "simple-bus"; + reg = <0x1c5000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1c5000 0x1000>; + + pllss_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + pllss_clockdomains: clockdomains { + }; + }; + + wdt1: wdt@1c7000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer"; + reg = <0x1c7000 0x1000>; + interrupts = <91>; + }; + }; + + intc: interrupt-controller@48200000 { + compatible = "ti,dm814-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x48200000 0x1000>; + }; + + /* Board must configure evtmux with edma_xbar for EDMA */ + mmc3: mmc@47810000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + interrupts = <29>; + interrupt-parent = <&intc>; + reg = <0x47810000 0x1000>; + }; + + target-module@49000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49000000 0x4>; + reg-names = "rev"; + clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49000000 0x10000>; + + edma: dma@0 { + compatible = "ti,edma3-tpcc"; + reg = <0 0x10000>; + reg-names = "edma3_cc"; + interrupts = <12 13 14>; + interrupt-names = "edma3_ccint", "edma3_mperr", + "edma3_ccerrint"; + dma-requests = <64>; + #dma-cells = <2>; + + ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>, + <&edma_tptc2 3>, <&edma_tptc3 0>; + + ti,edma-memcpy-channels = <20 21>; + }; + }; + + target-module@49800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49800000 0x4>, + <0x49800010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49800000 0x100000>; + + edma_tptc0: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <112>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49900000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49900000 0x4>, + <0x49900010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49900000 0x100000>; + + edma_tptc1: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <113>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49a00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49a00000 0x4>, + <0x49a00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49a00000 0x100000>; + + edma_tptc2: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <114>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + target-module@49b00000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x49b00000 0x4>, + <0x49b00010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>; + ti,sysc-midle = <SYSC_IDLE_FORCE>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_SMART>; + clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x49b00000 0x100000>; + + edma_tptc3: dma@0 { + compatible = "ti,edma3-tptc"; + reg = <0 0x100000>; + interrupts = <115>; + interrupt-names = "edma3_tcerrint"; + }; + }; + + /* See TRM "Table 1-318. L4HS Instance Summary" */ + l4hs: l4hs@4a000000 { + compatible = "ti,dm814-l4hs", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1b4040>; + + target-module@100000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x100900 0x4>, + <0x100908 0x4>, + <0x100904 0x4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-mask = <0>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>; + ti,syss-mask = <1>; + clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x100000 0x8000>; + + mac: ethernet@0 { + compatible = "ti,cpsw"; + clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>; + clock-names = "fck", "cpts"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; + mac_control = <0x20>; + slaves = <2>; + active_slave = <0>; + cpts_clock_mult = <0x80000000>; + cpts_clock_shift = <29>; + reg = <0 0x800>, + <0x900 0x100>; + #address-cells = <1>; + #size-cells = <1>; + /* + * c0_rx_thresh_pend + * c0_rx_pend + * c0_tx_pend + * c0_misc_pend + */ + interrupts = <40 41 42 43>; + ranges = <0 0 0x8000>; + syscon = <&scm_conf>; + + davinci_mdio: mdio@800 { + compatible = "ti,cpsw-mdio", "ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x800 0x100>; + }; + + cpsw_emac0: slave@200 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1>; + }; + + cpsw_emac1: slave@300 { + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2>; + }; + }; + }; + }; + + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; + ti,no-idle-on-init; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; + gpmc,num-waitpins = <2>; + #address-cells = <2>; + #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + +#include "dm814x-clocks.dtsi" + +/* Preferred always-on timer for clocksource */ +&timer1_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer1_fck>; + assigned-clock-parents = <&devosc_ck>; + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&timer2_fck>; + assigned-clock-parents = <&devosc_ck>; + }; +}; |