Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 686 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
new file mode 100644
index 000000000..62bf335d5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -0,0 +1,686 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Universal C210 board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Universal C210 board which is based on
+ * Samsung's Exynos4210 rev0 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Samsung Universal C210 based on Exynos4210 rev0";
+	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg =  <0x40000000 0x10000000
+			0x50000000 0x10000000>;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+		stdout-path = "serial2:115200n8";
+	};
+
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	vemmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-up-key {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <1>;
+		};
+
+		vol-down-key {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <1>;
+		};
+
+		config-key {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <171>;
+			label = "config";
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+
+		camera-key {
+			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <212>;
+			label = "camera";
+			debounce-interval = <1>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <1>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_2_8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			spi-max-frequency = <1200000>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi_en: voltage-regulator-hdmi-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	hdmi_ddc: i2c-ddc {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_ddc_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&camera {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+	vbus-supply = <&safeout1_reg>;
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			  <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			  <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			  <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			  <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+	samsung,invert-vden;
+	samsung,invert-vclk;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@3 {
+		reg = <3>;
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&buck2_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	hdmi-en-supply = <&hdmi_en>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&hdmi_ddc>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tsp@4a {
+		/* TBD: Atmel maXtouch touchscreen */
+		reg = <0x4a>;
+	};
+};
+
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_arm_reg: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "VARM_1.2V_C210";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pmic@66 {
+		compatible = "national,lp3974";
+		interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp3974_irq>;
+		reg = <0x66>;
+
+		max8998,pmic-buck1-default-dvs-idx = <0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						<&gpx0 6 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+						<1100000>, <1000000>;
+
+		max8998,pmic-buck2-default-dvs-idx = <0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+		regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VALIVE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VUSB+MIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VLCD+VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VCC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "CAM_AF_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PS_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VHIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "CAM_I_HOST_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "CAM_S_ANA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VINT_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VG3D_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ap32khz_reg: EN32KHz-AP {
+				regulator-name = "32KHz AP";
+				regulator-always-on;
+			};
+
+			cp32khz_reg: EN32KHz-CP {
+				regulator-name = "32KHz CP";
+			};
+
+			vichg_reg: ENVICHG {
+				regulator-name = "VICHG";
+			};
+
+			safeout1_reg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safeout2_reg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&mct {
+	compatible = "none";
+};
+
+&mdma1 {
+	/* Use the secure mdma0 */
+	status = "disabled";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
+&pinctrl_1 {
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	lp3974_irq: lp3974-irq-pins {
+		samsung,pins = "gpx0-7", "gpx2-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hdmi_hpd: hdmi-hpd-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_0 {
+	i2c_ddc_bus: i2c-ddc-bus-pins {
+		samsung,pins = "gpe4-2", "gpe4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	compatible = "samsung,s5p6440-pwm";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo5_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_2 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_3 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&soc {
+	mdma0: dma-controller@12840000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x12840000 0x1000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock CLK_MDMA>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		power-domains = <&pd_lcd0>;
+	};
+};
+
+&sysram {
+	smp-sram@0 {
+		status = "disabled";
+	};
+
+	smp-sram@5000 {
+		compatible = "samsung,exynos4210-sysram";
+		reg = <0x5000 0x1000>;
+	};
+
+	smp-sram@1f000 {
+		status = "disabled";
+	};
+};