Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 552 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
new file mode 100644
index 000000000..ea9fd2843
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	firmware@203f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203f000 0x1000>;
+	};
+
+	mmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <47500000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 4 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1100000>, <1100000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+		wakeup-source;
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap", "s5m8767_cp",
+					     "s5m8767_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD18_2M";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "DVDD25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_M12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD12_5M";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VDDF28_EMMC";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+		};
+	};
+};
+
+&keypad {
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <2>;
+	linux,keypad-no-autorepeat;
+	wakeup-source;
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	key-home {
+		keypad,row = <0>;
+		keypad,column = <0>;
+		linux,code = <KEY_HOME>;
+	};
+
+	key-down {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_DOWN>;
+	};
+
+	key-up {
+		keypad,row = <1>;
+		keypad,column = <0>;
+		linux,code = <KEY_UP>;
+	};
+
+	key-menu {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_MENU>;
+	};
+
+	key-back {
+		keypad,row = <2>;
+		keypad,column = <0>;
+		linux,code = <KEY_BACK>;
+	};
+
+	key-enter {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_ENTER>;
+	};
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pinctrl_1 {
+	keypad_rows: keypad-rows-pins {
+		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	keypad_cols: keypad-cols-pins {
+		samsung,pins = "gpx1-0", "gpx1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};