Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 554 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 000000000..a97449b46
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,exynos5260", "samsung,exynos5";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		i2c0 = &hsi2c_0;
+		i2c1 = &hsi2c_1;
+		i2c2 = &hsi2c_2;
+		i2c3 = &hsi2c_3;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+				core2 {
+					cpu = <&cpu4>;
+				};
+				core3 {
+					cpu = <&cpu5>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			cci-control-port = <&cci_control1>;
+		};
+
+		cpu2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu4: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			cci-control-port = <&cci_control0>;
+		};
+
+		cpu5: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			cci-control-port = <&cci_control0>;
+		};
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clock_top: clock-controller@10010000 {
+			compatible = "samsung,exynos5260-clock-top";
+			reg = <0x10010000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEM_PLL>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_mem_pll",
+				      "dout_bus_pll",
+				      "dout_media_pll";
+		};
+
+		clock_peri: clock-controller@10200000 {
+			compatible = "samsung,exynos5260-clock-peri";
+			reg = <0x10200000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&ioclk_pcm>,
+				 <&ioclk_i2s>,
+				 <&ioclk_spdif>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+			clock-names = "fin_pll",
+				      "ioclk_pcm_extclk",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_spdif_extclk",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "dout_aclk_peri_66",
+				      "dout_sclk_peri_uart0",
+				      "dout_sclk_peri_uart1",
+				      "dout_sclk_peri_uart2",
+				      "dout_sclk_peri_spi0_b",
+				      "dout_sclk_peri_spi1_b",
+				      "dout_sclk_peri_spi2_b",
+				      "dout_aclk_peri_aud";
+		};
+
+		clock_egl: clock-controller@10600000 {
+			compatible = "samsung,exynos5260-clock-egl";
+			reg = <0x10600000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>;
+			clock-names = "fin_pll",
+				      "dout_bus_pll";
+		};
+
+		clock_kfc: clock-controller@10700000 {
+			compatible = "samsung,exynos5260-clock-kfc";
+			reg = <0x10700000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_media_pll";
+		};
+
+		clock_g2d: clock-controller@10a00000 {
+			compatible = "samsung,exynos5260-clock-g2d";
+			reg = <0x10a00000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_g2d_333";
+		};
+
+		clock_mif: clock-controller@10ce0000 {
+			compatible = "samsung,exynos5260-clock-mif";
+			reg = <0x10ce0000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_mfc: clock-controller@11090000 {
+			compatible = "samsung,exynos5260-clock-mfc";
+			reg = <0x11090000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_mfc_333";
+		};
+
+		clock_g3d: clock-controller@11830000 {
+			compatible = "samsung,exynos5260-clock-g3d";
+			reg = <0x11830000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_fsys: clock-controller@122e0000 {
+			compatible = "samsung,exynos5260-clock-fsys";
+			reg = <0x122e0000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+			clock-names = "fin_pll",
+				      "phyclk_usbhost20_phy_phyclock",
+				      "phyclk_usbhost20_phy_freeclk",
+				      "phyclk_usbhost20_phy_clk48mohci",
+				      "phyclk_usbdrd30_udrd30_pipe_pclk",
+				      "phyclk_usbdrd30_udrd30_phyclock",
+				      "dout_aclk_fsys_200";
+		};
+
+		clock_aud: clock-controller@128c0000 {
+			compatible = "samsung,exynos5260-clock-aud";
+			reg = <0x128c0000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_FOUT_AUD_PLL>,
+				 <&ioclk_i2s>,
+				 <&ioclk_pcm>;
+			clock-names = "fin_pll",
+				      "fout_aud_pll",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_pcm_extclk";
+		};
+
+		clock_isp: clock-controller@133c0000 {
+			compatible = "samsung,exynos5260-clock-isp";
+			reg = <0x133c0000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+			clock-names = "fin_pll",
+				      "dout_aclk_isp1_266",
+				      "dout_aclk_isp1_400",
+				      "mout_aclk_isp1_266";
+		};
+
+		clock_gscl: clock-controller@13f00000 {
+			compatible = "samsung,exynos5260-clock-gscl";
+			reg = <0x13f00000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_gscl_400",
+				      "dout_aclk_gscl_333";
+		};
+
+		clock_disp: clock-controller@14550000 {
+			compatible = "samsung,exynos5260-clock-disp";
+			reg = <0x14550000 0x10000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&ioclk_spdif>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
+				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
+			clock-names = "fin_pll",
+				      "phyclk_dptx_phy_ch3_txd_clk",
+				      "phyclk_dptx_phy_ch2_txd_clk",
+				      "phyclk_dptx_phy_ch1_txd_clk",
+				      "phyclk_dptx_phy_ch0_txd_clk",
+				      "phyclk_hdmi_phy_tmds_clko",
+				      "phyclk_hdmi_phy_ref_clko",
+				      "phyclk_hdmi_phy_pixel_clko",
+				      "phyclk_hdmi_link_o_tmds_clkhi",
+				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+				      "phyclk_dptx_phy_o_ref_clk_24m",
+				      "phyclk_dptx_phy_clk_div2",
+				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "ioclk_spdif_extclk",
+				      "dout_aclk_peri_aud",
+				      "dout_aclk_disp_222",
+				      "dout_sclk_disp_pixel",
+				      "dout_aclk_disp_333";
+		};
+
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+				<0x10482000 0x2000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		mct: timer@100b0000 {
+			compatible = "samsung,exynos5260-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x100b0000 0x1000>;
+			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cci: cci@10f00000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10f00000 0x1000>;
+			ranges = <0x0 0x10f00000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
+		};
+
+		pinctrl_0: pinctrl@11600000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x11600000 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_1: pinctrl@12290000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x12290000 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_2: pinctrl@128b0000 {
+			compatible = "samsung,exynos5260-pinctrl";
+			reg = <0x128b0000 0x1000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@10d50000 {
+			compatible = "samsung,exynos5260-pmu", "syscon";
+			reg = <0x10d50000 0x10000>;
+		};
+
+		uart0: serial@12c00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c00000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart1: serial@12c10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c10000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart2: serial@12c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c20000 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		uart3: serial@12860000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12860000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12140000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12140000 0x2000>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC0>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_1: mmc@12150000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12150000 0x2000>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC1>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		mmc_2: mmc@12160000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12160000 0x2000>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC2>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
+			fifo-depth = <64>;
+			status = "disabled";
+		};
+
+		hsi2c_0: i2c@12da0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12da0000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@12db0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12db0000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@12dc0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12dc0000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@12dd0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12dd0000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos5260-pinctrl.dtsi"