Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 986 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
new file mode 100644
index 000000000..2424cc545
--- /dev/null
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,986 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HiSilicon Ltd. HiP04 SoC
+ *
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	bootwrapper {
+		compatible = "hisilicon,hip04-bootwrapper";
+		boot-method = <0x10c00000 0x10000>, <0xe0000100 0x1000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+		};
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+		};
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+		};
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+		};
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+		};
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+		};
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+		};
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+		};
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+		};
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+	};
+
+	clk_50m: clk_50m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	clk_168m: clk_168m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <168000000>;
+	};
+
+	clk_375m: clk_375m {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <375000000>;
+	};
+
+	soc {
+		/* It's a 32-bit SoC. */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges = <0 0 0xe0000000 0x10000000>;
+
+		gic: interrupt-controller@c01000 {
+			compatible = "hisilicon,hip04-intc";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+
+			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+			      <0xc04000 0x2000>, <0xc06000 0x2000>;
+		};
+
+		sysctrl: sysctrl {
+			compatible = "hisilicon,sysctrl", "syscon";
+			reg = <0x3e00000 0x00100000>;
+		};
+
+		fabric: fabric {
+			compatible = "hisilicon,hip04-fabric";
+			reg = <0x302a000 0x1000>;
+		};
+
+		dual_timer0: dual_timer@3000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x3000000 0x1000>;
+			interrupts = <0 224 4>;
+			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+		};
+
+		arm-pmu {
+			compatible = "arm,cortex-a15-pmu";
+			interrupts = <0 64 4>,
+				     <0 65 4>,
+				     <0 66 4>,
+				     <0 67 4>,
+				     <0 68 4>,
+				     <0 69 4>,
+				     <0 70 4>,
+				     <0 71 4>,
+				     <0 72 4>,
+				     <0 73 4>,
+				     <0 74 4>,
+				     <0 75 4>,
+				     <0 76 4>,
+				     <0 77 4>,
+				     <0 78 4>,
+				     <0 79 4>;
+		};
+
+		uart0: serial@4007000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x4007000 0x1000>;
+			interrupts = <0 381 4>;
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		sata0: sata@a000000 {
+			compatible = "hisilicon,hisi-ahci";
+			reg = <0xa000000 0x1000000>;
+			interrupts = <0 372 4>;
+		};
+
+	};
+
+	etb@0,e3c42000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c42000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb0_in_port: endpoint@0 {
+					remote-endpoint = <&replicator0_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3c82000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3c82000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb1_in_port: endpoint@0 {
+					remote-endpoint = <&replicator1_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3cc2000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3cc2000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb2_in_port: endpoint@0 {
+					remote-endpoint = <&replicator2_out_port0>;
+				};
+			};
+		};
+	};
+
+	etb@0,e3d02000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0 0xe3d02000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				etb3_in_port: endpoint@0 {
+					remote-endpoint = <&replicator3_out_port0>;
+				};
+			};
+		};
+	};
+
+	tpiu@0,e3c05000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0 0xe3c05000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&funnel4_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator0 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator0_out_port0: endpoint {
+					remote-endpoint = <&etb0_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator0_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator0_in_port0: endpoint {
+					remote-endpoint = <&funnel0_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator1 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator1_out_port0: endpoint {
+					remote-endpoint = <&etb1_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator1_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port1>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator1_in_port0: endpoint {
+					remote-endpoint = <&funnel1_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator2 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator2_out_port0: endpoint {
+					remote-endpoint = <&etb2_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+					replicator2_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port2>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator2_in_port0: endpoint {
+					remote-endpoint = <&funnel2_out_port0>;
+				};
+			};
+		};
+	};
+
+	replicator3 {
+		/* non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell".
+		 */
+		compatible = "arm,coresight-static-replicator";
+
+		out-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				replicator3_out_port0: endpoint {
+					remote-endpoint = <&etb3_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator3_out_port1: endpoint {
+					remote-endpoint = <&funnel4_in_port3>;
+				};
+			};
+		};
+
+		in-ports {
+			port {
+				replicator3_in_port0: endpoint {
+					remote-endpoint = <&funnel3_out_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c41000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c41000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel0_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel0_in_port0: endpoint {
+					remote-endpoint = <&ptm0_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel0_in_port1: endpoint {
+					remote-endpoint = <&ptm1_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel0_in_port2: endpoint {
+					remote-endpoint = <&ptm2_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel0_in_port3: endpoint {
+					remote-endpoint = <&ptm3_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c81000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c81000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel1_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator1_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel1_in_port0: endpoint {
+					remote-endpoint = <&ptm4_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel1_in_port1: endpoint {
+					remote-endpoint = <&ptm5_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel1_in_port2: endpoint {
+					remote-endpoint = <&ptm6_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel1_in_port3: endpoint {
+					remote-endpoint = <&ptm7_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3cc1000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3cc1000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel2_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator2_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel2_in_port0: endpoint {
+					remote-endpoint = <&ptm8_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel2_in_port1: endpoint {
+					remote-endpoint = <&ptm9_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel2_in_port2: endpoint {
+					remote-endpoint = <&ptm10_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel2_in_port3: endpoint {
+					remote-endpoint = <&ptm11_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3d01000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3d01000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel3_out_port0: endpoint {
+					remote-endpoint =
+						<&replicator3_in_port0>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel3_in_port0: endpoint {
+					remote-endpoint = <&ptm12_out_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel3_in_port1: endpoint {
+					remote-endpoint = <&ptm13_out_port>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel3_in_port2: endpoint {
+					remote-endpoint = <&ptm14_out_port>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel3_in_port3: endpoint {
+					remote-endpoint = <&ptm15_out_port>;
+				};
+			};
+		};
+	};
+
+	funnel@0,e3c04000 {
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+		reg = <0 0xe3c04000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		out-ports {
+			port {
+				funnel4_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+		};
+
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				funnel4_in_port0: endpoint {
+					remote-endpoint =
+						<&replicator0_out_port1>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				funnel4_in_port1: endpoint {
+					remote-endpoint =
+						<&replicator1_out_port1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				funnel4_in_port2: endpoint {
+					remote-endpoint =
+						<&replicator2_out_port1>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+				funnel4_in_port3: endpoint {
+					remote-endpoint =
+						<&replicator3_out_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU2>;
+		out-ports {
+			port {
+				ptm2_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3c7f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3c7f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU3>;
+		out-ports {
+			port {
+				ptm3_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU4>;
+		out-ports {
+			port {
+				ptm4_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbd000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU5>;
+		out-ports {
+			port {
+				ptm5_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU6>;
+		out-ports {
+			port {
+				ptm6_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cbf000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cbf000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU7>;
+		out-ports {
+			port {
+				ptm7_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfc000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfc000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU8>;
+		out-ports {
+			port {
+				ptm8_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfd000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfd000 0 0x1000>;
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU9>;
+		out-ports {
+			port {
+				ptm9_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cfe000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cfe000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU10>;
+		out-ports {
+			port {
+				ptm10_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3cff000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3cff000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU11>;
+		out-ports {
+			port {
+				ptm11_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port3>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3c000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU12>;
+		out-ports {
+			port {
+				ptm12_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port0>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3d000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3d000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU13>;
+		out-ports {
+			port {
+				ptm13_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port1>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3e000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3e000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU14>;
+		out-ports {
+			port {
+				ptm14_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port2>;
+				};
+			};
+		};
+	};
+
+	ptm@0,e3d3f000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0 0xe3d3f000 0 0x1000>;
+
+		clocks = <&clk_375m>;
+		clock-names = "apb_pclk";
+		cpu = <&CPU15>;
+		out-ports {
+			port {
+				ptm15_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port3>;
+				};
+			};
+		};
+	};
+};