Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 296 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h
new file mode 100644
index 000000000..bd2e679cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx1-pinfunc.h
@@ -0,0 +1,296 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#ifndef __DTS_IMX1_PINFUNC_H
+#define __DTS_IMX1_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <pin mux_id>
+ * mux_id consists of
+ * function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+ *
+ * function:      0 - Primary function
+ *                1 - Alternate function
+ *                2 - GPIO
+ * direction:     0 - Input
+ *                1 - Output
+ * gpio_oconf:    0 - A_IN
+ *                1 - B_IN
+ *                2 - A_OUT
+ *                3 - Data Register
+ * gpio_iconfa/b: 0 - GPIO_IN
+ *                1 - Interrupt Status Register
+ *                2 - 0
+ *                3 - 1
+ *
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
+ */
+
+#define MX1_PAD_A24__A24			0x00 0x004
+#define MX1_PAD_A24__GPIO1_0			0x00 0x032
+#define MX1_PAD_A24__SPI2_CLK			0x00 0x006
+#define MX1_PAD_TIN__TIN			0x01 0x000
+#define MX1_PAD_TIN__GPIO1_1			0x01 0x032
+#define MX1_PAD_TIN__SPI2_RXD			0x01 0x022
+#define MX1_PAD_PWMO__PWMO			0x02 0x004
+#define MX1_PAD_PWMO__GPIO1_2			0x02 0x032
+#define MX1_PAD_CSI_MCLK__CSI_MCLK		0x03 0x004
+#define MX1_PAD_CSI_MCLK__GPIO1_3		0x03 0x032
+#define MX1_PAD_CSI_D0__CSI_D0			0x04 0x000
+#define MX1_PAD_CSI_D0__GPIO1_4			0x04 0x032
+#define MX1_PAD_CSI_D1__CSI_D1			0x05 0x000
+#define MX1_PAD_CSI_D1__GPIO1_5			0x05 0x032
+#define MX1_PAD_CSI_D2__CSI_D2			0x06 0x000
+#define MX1_PAD_CSI_D2__GPIO1_6			0x06 0x032
+#define MX1_PAD_CSI_D3__CSI_D3			0x07 0x000
+#define MX1_PAD_CSI_D3__GPIO1_7			0x07 0x032
+#define MX1_PAD_CSI_D4__CSI_D4			0x08 0x000
+#define MX1_PAD_CSI_D4__GPIO1_8			0x08 0x032
+#define MX1_PAD_CSI_D5__CSI_D5			0x09 0x000
+#define MX1_PAD_CSI_D5__GPIO1_9			0x09 0x032
+#define MX1_PAD_CSI_D6__CSI_D6			0x0a 0x000
+#define MX1_PAD_CSI_D6__GPIO1_10		0x0a 0x032
+#define MX1_PAD_CSI_D7__CSI_D7			0x0b 0x000
+#define MX1_PAD_CSI_D7__GPIO1_11		0x0b 0x032
+#define MX1_PAD_CSI_VSYNC__CSI_VSYNC		0x0c 0x000
+#define MX1_PAD_CSI_VSYNC__GPIO1_12		0x0c 0x032
+#define MX1_PAD_CSI_HSYNC__CSI_HSYNC		0x0d 0x000
+#define MX1_PAD_CSI_HSYNC__GPIO1_13		0x0d 0x032
+#define MX1_PAD_CSI_PIXCLK__CSI_PIXCLK		0x0e 0x000
+#define MX1_PAD_CSI_PIXCLK__GPIO1_14		0x0e 0x032
+#define MX1_PAD_I2C_SDA__I2C_SDA		0x0f 0x000
+#define MX1_PAD_I2C_SDA__GPIO1_15		0x0f 0x032
+#define MX1_PAD_I2C_SCL__I2C_SCL		0x10 0x004
+#define MX1_PAD_I2C_SCL__GPIO1_16		0x10 0x032
+#define MX1_PAD_DTACK__DTACK			0x11 0x000
+#define MX1_PAD_DTACK__GPIO1_17			0x11 0x032
+#define MX1_PAD_DTACK__SPI2_SS			0x11 0x002
+#define MX1_PAD_DTACK__A25			0x11 0x016
+#define MX1_PAD_BCLK__BCLK			0x12 0x004
+#define MX1_PAD_BCLK__GPIO1_18			0x12 0x032
+#define MX1_PAD_LBA__LBA			0x13 0x004
+#define MX1_PAD_LBA__GPIO1_19			0x13 0x032
+#define MX1_PAD_ECB__ECB			0x14 0x000
+#define MX1_PAD_ECB__GPIO1_20			0x14 0x032
+#define MX1_PAD_A0__A0				0x15 0x004
+#define MX1_PAD_A0__GPIO1_21			0x15 0x032
+#define MX1_PAD_CS4__CS4			0x16 0x004
+#define MX1_PAD_CS4__GPIO1_22			0x16 0x032
+#define MX1_PAD_CS5__CS5			0x17 0x004
+#define MX1_PAD_CS5__GPIO1_23			0x17 0x032
+#define MX1_PAD_A16__A16			0x18 0x004
+#define MX1_PAD_A16__GPIO1_24			0x18 0x032
+#define MX1_PAD_A17__A17			0x19 0x004
+#define MX1_PAD_A17__GPIO1_25			0x19 0x032
+#define MX1_PAD_A18__A18			0x1a 0x004
+#define MX1_PAD_A18__GPIO1_26			0x1a 0x032
+#define MX1_PAD_A19__A19			0x1b 0x004
+#define MX1_PAD_A19__GPIO1_27			0x1b 0x032
+#define MX1_PAD_A20__A20			0x1c 0x004
+#define MX1_PAD_A20__GPIO1_28			0x1c 0x032
+#define MX1_PAD_A21__A21			0x1d 0x004
+#define MX1_PAD_A21__GPIO1_29			0x1d 0x032
+#define MX1_PAD_A22__A22			0x1e 0x004
+#define MX1_PAD_A22__GPIO1_30			0x1e 0x032
+#define MX1_PAD_A23__A23			0x1f 0x004
+#define MX1_PAD_A23__GPIO1_31			0x1f 0x032
+#define MX1_PAD_SD_DAT0__SD_DAT0		0x28 0x000
+#define MX1_PAD_SD_DAT0__MS_PI0			0x28 0x001
+#define MX1_PAD_SD_DAT0__GPIO2_8		0x28 0x032
+#define MX1_PAD_SD_DAT1__SD_DAT1		0x29 0x000
+#define MX1_PAD_SD_DAT1__MS_PI1			0x29 0x001
+#define MX1_PAD_SD_DAT1__GPIO2_9		0x29 0x032
+#define MX1_PAD_SD_DAT2__SD_DAT2		0x2a 0x000
+#define MX1_PAD_SD_DAT2__MS_SCLKI		0x2a 0x001
+#define MX1_PAD_SD_DAT2__GPIO2_10		0x2a 0x032
+#define MX1_PAD_SD_DAT3__SD_DAT3		0x2b 0x000
+#define MX1_PAD_SD_DAT3__MS_SDIO		0x2b 0x001
+#define MX1_PAD_SD_DAT3__GPIO2_11		0x2b 0x032
+#define MX1_PAD_SD_SCLK__SD_SCLK		0x2c 0x004
+#define MX1_PAD_SD_SCLK__MS_SCLKO		0x2c 0x005
+#define MX1_PAD_SD_SCLK__GPIO2_12		0x2c 0x032
+#define MX1_PAD_SD_CMD__SD_CMD			0x2d 0x000
+#define MX1_PAD_SD_CMD__MS_BS			0x2d 0x005
+#define MX1_PAD_SD_CMD__GPIO2_13		0x2d 0x032
+#define MX1_PAD_SIM_SVEN__SIM_SVEN		0x2e 0x004
+#define MX1_PAD_SIM_SVEN__SSI_RXFS		0x2e 0x001
+#define MX1_PAD_SIM_SVEN__GPIO2_14		0x2e 0x032
+#define MX1_PAD_SIM_PD__SIM_PD			0x2f 0x000
+#define MX1_PAD_SIM_PD__SSI_RXCLK		0x2f 0x001
+#define MX1_PAD_SIM_PD__GPIO2_15		0x2f 0x032
+#define MX1_PAD_SIM_TX__SIM_TX			0x30 0x000
+#define MX1_PAD_SIM_TX__SSI_RXDAT		0x30 0x001
+#define MX1_PAD_SIM_TX__GPIO2_16		0x30 0x032
+#define MX1_PAD_SIM_RX__SIM_RX			0x31 0x000
+#define MX1_PAD_SIM_RX__SSI_TXDAT		0x31 0x005
+#define MX1_PAD_SIM_RX__GPIO2_17		0x31 0x032
+#define MX1_PAD_SIM_RST__SIM_RST		0x32 0x004
+#define MX1_PAD_SIM_RST__SSI_TXFS		0x32 0x001
+#define MX1_PAD_SIM_RST__GPIO2_18		0x32 0x032
+#define MX1_PAD_SIM_CLK__SIM_CLK		0x33 0x004
+#define MX1_PAD_SIM_CLK__SSI_TXCLK		0x33 0x001
+#define MX1_PAD_SIM_CLK__GPIO2_19		0x33 0x032
+#define MX1_PAD_USBD_AFE__USBD_AFE		0x34 0x004
+#define MX1_PAD_USBD_AFE__GPIO2_20		0x34 0x032
+#define MX1_PAD_USBD_OE__USBD_OE		0x35 0x004
+#define MX1_PAD_USBD_OE__GPIO2_21		0x35 0x032
+#define MX1_PAD_USBD_RCV__USBD_RCV		0x36 0x000
+#define MX1_PAD_USBD_RCV__GPIO2_22		0x36 0x032
+#define MX1_PAD_USBD_SUSPND__USBD_SUSPND	0x37 0x004
+#define MX1_PAD_USBD_SUSPND__GPIO2_23		0x37 0x032
+#define MX1_PAD_USBD_VP__USBD_VP		0x38 0x000
+#define MX1_PAD_USBD_VP__GPIO2_24		0x38 0x032
+#define MX1_PAD_USBD_VM__USBD_VM		0x39 0x000
+#define MX1_PAD_USBD_VM__GPIO2_25		0x39 0x032
+#define MX1_PAD_USBD_VPO__USBD_VPO		0x3a 0x004
+#define MX1_PAD_USBD_VPO__GPIO2_26		0x3a 0x032
+#define MX1_PAD_USBD_VMO__USBD_VMO		0x3b 0x004
+#define MX1_PAD_USBD_VMO__GPIO2_27		0x3b 0x032
+#define MX1_PAD_UART2_CTS__UART2_CTS		0x3c 0x004
+#define MX1_PAD_UART2_CTS__GPIO2_28		0x3c 0x032
+#define MX1_PAD_UART2_RTS__UART2_RTS		0x3d 0x000
+#define MX1_PAD_UART2_RTS__GPIO2_29		0x3d 0x032
+#define MX1_PAD_UART2_TXD__UART2_TXD		0x3e 0x004
+#define MX1_PAD_UART2_TXD__GPIO2_30		0x3e 0x032
+#define MX1_PAD_UART2_RXD__UART2_RXD		0x3f 0x000
+#define MX1_PAD_UART2_RXD__GPIO2_31		0x3f 0x032
+#define MX1_PAD_SSI_RXFS__SSI_RXFS		0x43 0x000
+#define MX1_PAD_SSI_RXFS__GPIO3_3		0x43 0x032
+#define MX1_PAD_SSI_RXCLK__SSI_RXCLK		0x44 0x000
+#define MX1_PAD_SSI_RXCLK__GPIO3_4		0x44 0x032
+#define MX1_PAD_SSI_RXDAT__SSI_RXDAT		0x45 0x000
+#define MX1_PAD_SSI_RXDAT__GPIO3_5		0x45 0x032
+#define MX1_PAD_SSI_TXDAT__SSI_TXDAT		0x46 0x004
+#define MX1_PAD_SSI_TXDAT__GPIO3_6		0x46 0x032
+#define MX1_PAD_SSI_TXFS__SSI_TXFS		0x47 0x000
+#define MX1_PAD_SSI_TXFS__GPIO3_7		0x47 0x032
+#define MX1_PAD_SSI_TXCLK__SSI_TXCLK		0x48 0x000
+#define MX1_PAD_SSI_TXCLK__GPIO3_8		0x48 0x032
+#define MX1_PAD_UART1_CTS__UART1_CTS		0x49 0x004
+#define MX1_PAD_UART1_CTS__GPIO3_9		0x49 0x032
+#define MX1_PAD_UART1_RTS__UART1_RTS		0x4a 0x000
+#define MX1_PAD_UART1_RTS__GPIO3_10		0x4a 0x032
+#define MX1_PAD_UART1_TXD__UART1_TXD		0x4b 0x004
+#define MX1_PAD_UART1_TXD__GPIO3_11		0x4b 0x032
+#define MX1_PAD_UART1_RXD__UART1_RXD		0x4c 0x000
+#define MX1_PAD_UART1_RXD__GPIO3_12		0x4c 0x032
+#define MX1_PAD_SPI1_RDY__SPI1_RDY		0x4d 0x000
+#define MX1_PAD_SPI1_RDY__GPIO3_13		0x4d 0x032
+#define MX1_PAD_SPI1_SCLK__SPI1_SCLK		0x4e 0x004
+#define MX1_PAD_SPI1_SCLK__GPIO3_14		0x4e 0x032
+#define MX1_PAD_SPI1_SS__SPI1_SS		0x4f 0x000
+#define MX1_PAD_SPI1_SS__GPIO3_15		0x4f 0x032
+#define MX1_PAD_SPI1_MISO__SPI1_MISO		0x50 0x000
+#define MX1_PAD_SPI1_MISO__GPIO3_16		0x50 0x032
+#define MX1_PAD_SPI1_MOSI__SPI1_MOSI		0x51 0x004
+#define MX1_PAD_SPI1_MOSI__GPIO3_17		0x51 0x032
+#define MX1_PAD_BT13__BT13			0x53 0x004
+#define MX1_PAD_BT13__SSI2_RXCLK		0x53 0x001
+#define MX1_PAD_BT13__GPIO3_19			0x53 0x032
+#define MX1_PAD_BT12__BT12			0x54 0x004
+#define MX1_PAD_BT12__SSI2_TXFS			0x54 0x001
+#define MX1_PAD_BT12__GPIO3_20			0x54 0x032
+#define MX1_PAD_BT11__BT11			0x55 0x004
+#define MX1_PAD_BT11__SSI2_TXCLK		0x55 0x001
+#define MX1_PAD_BT11__GPIO3_21			0x55 0x032
+#define MX1_PAD_BT10__BT10			0x56 0x004
+#define MX1_PAD_BT10__SSI2_TX			0x56 0x001
+#define MX1_PAD_BT10__GPIO3_22			0x56 0x032
+#define MX1_PAD_BT9__BT9			0x57 0x004
+#define MX1_PAD_BT9__SSI2_RX			0x57 0x001
+#define MX1_PAD_BT9__GPIO3_23			0x57 0x032
+#define MX1_PAD_BT8__BT8			0x58 0x004
+#define MX1_PAD_BT8__SSI2_RXFS			0x58 0x001
+#define MX1_PAD_BT8__GPIO3_24			0x58 0x032
+#define MX1_PAD_BT8__UART3_RI			0x58 0x016
+#define MX1_PAD_BT7__BT7			0x59 0x004
+#define MX1_PAD_BT7__GPIO3_25			0x59 0x032
+#define MX1_PAD_BT7__UART3_DSR			0x59 0x016
+#define MX1_PAD_BT6__BT6			0x5a 0x004
+#define MX1_PAD_BT6__GPIO3_26			0x5a 0x032
+#define MX1_PAD_BT6__SPI2_SS3			0x5a 0x016
+#define MX1_PAD_BT6__UART3_DTR			0x5a 0x022
+#define MX1_PAD_BT5__BT5			0x5b 0x000
+#define MX1_PAD_BT5__GPIO3_27			0x5b 0x032
+#define MX1_PAD_BT5__UART3_DCD			0x5b 0x016
+#define MX1_PAD_BT4__BT4			0x5c 0x000
+#define MX1_PAD_BT4__GPIO3_28			0x5c 0x032
+#define MX1_PAD_BT4__UART3_CTS			0x5c 0x016
+#define MX1_PAD_BT3__BT3			0x5d 0x000
+#define MX1_PAD_BT3__GPIO3_29			0x5d 0x032
+#define MX1_PAD_BT3__UART3_RTS			0x5d 0x022
+#define MX1_PAD_BT2__BT2			0x5e 0x004
+#define MX1_PAD_BT2__GPIO3_30			0x5e 0x032
+#define MX1_PAD_BT2__UART3_TX			0x5e 0x016
+#define MX1_PAD_BT1__BT1			0x5f 0x000
+#define MX1_PAD_BT1__GPIO3_31			0x5f 0x032
+#define MX1_PAD_BT1__UART3_RX			0x5f 0x022
+#define MX1_PAD_LSCLK__LSCLK			0x66 0x004
+#define MX1_PAD_LSCLK__GPIO4_6			0x66 0x032
+#define MX1_PAD_REV__REV			0x67 0x004
+#define MX1_PAD_REV__UART2_DTR			0x67 0x001
+#define MX1_PAD_REV__GPIO4_7			0x67 0x032
+#define MX1_PAD_REV__SPI2_CLK			0x67 0x006
+#define MX1_PAD_CLS__CLS			0x68 0x004
+#define MX1_PAD_CLS__UART2_DCD			0x68 0x005
+#define MX1_PAD_CLS__GPIO4_8			0x68 0x032
+#define MX1_PAD_CLS__SPI2_SS			0x68 0x002
+#define MX1_PAD_PS__PS				0x69 0x004
+#define MX1_PAD_PS__UART2_RI			0x69 0x005
+#define MX1_PAD_PS__GPIO4_9			0x69 0x032
+#define MX1_PAD_PS__SPI2_RXD			0x69 0x022
+#define MX1_PAD_SPL_SPR__SPL_SPR		0x6a 0x004
+#define MX1_PAD_SPL_SPR__UART2_DSR		0x6a 0x005
+#define MX1_PAD_SPL_SPR__GPIO4_10		0x6a 0x032
+#define MX1_PAD_SPL_SPR__SPI2_TXD		0x6a 0x006
+#define MX1_PAD_CONTRAST__CONTRAST		0x6b 0x004
+#define MX1_PAD_CONTRAST__GPIO4_11		0x6b 0x032
+#define MX1_PAD_CONTRAST__SPI2_SS2		0x6b 0x012
+#define MX1_PAD_ACD_OE__ACD_OE			0x6c 0x004
+#define MX1_PAD_ACD_OE__GPIO4_12		0x6c 0x032
+#define MX1_PAD_LP_HSYNC__LP_HSYNC		0x6d 0x004
+#define MX1_PAD_LP_HSYNC__GPIO4_13		0x6d 0x032
+#define MX1_PAD_FLM_VSYNC__FLM_VSYNC		0x6e 0x004
+#define MX1_PAD_FLM_VSYNC__GPIO4_14		0x6e 0x032
+#define MX1_PAD_LD0__LD0			0x6f 0x004
+#define MX1_PAD_LD0__GPIO4_15			0x6f 0x032
+#define MX1_PAD_LD1__LD1			0x70 0x004
+#define MX1_PAD_LD1__GPIO4_16			0x70 0x032
+#define MX1_PAD_LD2__LD2			0x71 0x004
+#define MX1_PAD_LD2__GPIO4_17			0x71 0x032
+#define MX1_PAD_LD3__LD3			0x72 0x004
+#define MX1_PAD_LD3__GPIO4_18			0x72 0x032
+#define MX1_PAD_LD4__LD4			0x73 0x004
+#define MX1_PAD_LD4__GPIO4_19			0x73 0x032
+#define MX1_PAD_LD5__LD5			0x74 0x004
+#define MX1_PAD_LD5__GPIO4_20			0x74 0x032
+#define MX1_PAD_LD6__LD6			0x75 0x004
+#define MX1_PAD_LD6__GPIO4_21			0x75 0x032
+#define MX1_PAD_LD7__LD7			0x76 0x004
+#define MX1_PAD_LD7__GPIO4_22			0x76 0x032
+#define MX1_PAD_LD8__LD8			0x77 0x004
+#define MX1_PAD_LD8__GPIO4_23			0x77 0x032
+#define MX1_PAD_LD9__LD9			0x78 0x004
+#define MX1_PAD_LD9__GPIO4_24			0x78 0x032
+#define MX1_PAD_LD10__LD10			0x79 0x004
+#define MX1_PAD_LD10__GPIO4_25			0x79 0x032
+#define MX1_PAD_LD11__LD11			0x7a 0x004
+#define MX1_PAD_LD11__GPIO4_26			0x7a 0x032
+#define MX1_PAD_LD12__LD12			0x7b 0x004
+#define MX1_PAD_LD12__GPIO4_27			0x7b 0x032
+#define MX1_PAD_LD13__LD13			0x7c 0x004
+#define MX1_PAD_LD13__GPIO4_28			0x7c 0x032
+#define MX1_PAD_LD14__LD14			0x7d 0x004
+#define MX1_PAD_LD14__GPIO4_29			0x7d 0x032
+#define MX1_PAD_LD15__LD15			0x7e 0x004
+#define MX1_PAD_LD15__GPIO4_30			0x7e 0x032
+#define MX1_PAD_TMR2OUT__TMR2OUT		0x7f 0x000
+#define MX1_PAD_TMR2OUT__GPIO4_31		0x7f 0x032
+#define MX1_PAD_TMR2OUT__SPI2_TXD		0x7f 0x006
+
+#endif