diff options
| author |  Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2023-02-21 18:24:12 -0800 |
| commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
| tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /arch/arm/boot/dts/imx53-ppd.dts | |
| download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip | |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'arch/arm/boot/dts/imx53-ppd.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx53-ppd.dts | 1122 |
1 files changed, 1122 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts new file mode 100644 index 000000000..70c4a4852 --- /dev/null +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -0,0 +1,1122 @@ +/* + * Copyright 2014 General Electric Company + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx53.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "General Electric CS ONE"; + compatible = "ge,imx53-cpuvo", "fsl,imx53"; + + aliases { + spi0 = &cspi; + spi1 = &ecspi1; + spi2 = &ecspi2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@70000000 { + device_type = "memory"; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; + }; + + cko2_11M: sgtl-clock-cko2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + }; + + achc_24M: achc-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sgtlsound: sound { + compatible = "fsl,imx53-cpuvo-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx53-cpuvo-sgtl5000"; + ssi-controller = <&ssi2>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; + + reg_sgtl5k: regulator-sgtl5k { + compatible = "regulator-fixed"; + regulator-name = "regulator-sgtl5k"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-0 = <&pinctrl_usb_otg_vbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usbh2_vbus: regulator-usbh2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbh3_vbus: regulator-usbh3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh3_vbus>; + gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_tsiref: regulator-tsiref { + compatible = "regulator-fixed"; + regulator-name = "tsiref"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3v3: regulator-3v3 { + /* TPS54320 */ + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3v3_lcd: regulator-3v3-lcd { + /* MIC2009 */ + compatible = "regulator-fixed"; + regulator-name = "LCD_3V3"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + pwm_bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35 + 38 40 43 45 48 51 53 56 58 61 63 66 68 71 + 73 76 79 81 84 86 89 91 94 96 99 102 104 + 107 109 112 114 117 119 122 124 127 130 + 132 135 137 140 142 145 147 150 153 155 + 158 160 163 165 168 170 173 175 178 181 + 183 186 188 191 193 196 198 201 204 206 + 209 211 214 216 219 221 224 226 229 232 + 234 237 239 242 244 247 249 252 255>; + default-brightness-level = <0>; + enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3_lcd>; + }; + + led-controller-1 { + compatible = "pwm-leds"; + + led-1 { + label = "alarm-brightness"; + pwms = <&pwm1 0 100000>; + max-brightness = <255>; + }; + }; + + led-controller-2 { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_alarmled_pins>; + + led-2 { + label = "alarm:red"; + gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; + + led-3 { + label = "alarm:yellow"; + gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; + }; + + led-4 { + label = "alarm:blue"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + }; + + led-5 { + label = "alarm:silenced"; + gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; + active-delay = <100>; + inactive-delay = <10>; + wait-delay = <100>; + }; + + power-gpio-keys { + compatible = "gpio-keys"; + + power-button { + label = "Power button"; + gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + }; + }; + + touch-lock-key { + compatible = "gpio-keys"; + + touch-lock-button { + label = "Touch lock button"; + gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F12>; + }; + }; + + usbphy2: usbphy-2 { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; + reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; + clock-names = "main_clk"; + clock-frequency = <24000000>; + clocks = <&clks IMX5_CLK_CKO2>; + assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; + assigned-clock-parents = <&clks IMX5_CLK_OSC>; + }; + + usbphy3: usbphy-3 { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; + reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; + clock-names = "main_clk"; + + clock-frequency = <24000000>; + clocks = <&clks IMX5_CLK_CKO2>; + assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>; + assigned-clock-parents = <&clks IMX5_CLK_OSC>; + }; + + panel-lvds0 { + compatible = "nvd,9128"; + power-supply = <®_3v3_lcd>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&usbphy0 { + vcc-supply = <®_3v3>; +}; + +&usbphy1 { + vcc-supply = <®_3v3>; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&cpu0 { + /* CPU rated to 1GHz, not 1.2GHz as per the default settings */ + operating-points = < + /* kHz uV */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + >; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW + &gpio4 10 GPIO_ACTIVE_LOW + &gpio4 11 GPIO_ACTIVE_LOW + &gpio4 12 GPIO_ACTIVE_LOW>; + status = "okay"; + + spidev0: spi@1 { + compatible = "ge,achc", "nxp,kinetis-k20"; + reg = <1>, <0>; + vdd-supply = <®_3v3>; + vdda-supply = <®_3v3>; + clocks = <&achc_24M>; + reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + }; + + gpioxra0: gpio@2 { + compatible = "exar,xra1403"; + reg = <2>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <1000000>; + }; + + gpioxra1: gpio@3 { + compatible = "exar,xra1403"; + reg = <3>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <1000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; + status = "okay"; + + da9053@0 { + compatible = "dlg,da9053-aa"; + reg = <0>; + interrupt-parent = <&gpio3>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <1000000>; + dlg,tsi-as-adc; + tsiref-supply = <®_tsiref>; + + regulators { + buck1_reg: buck1 { + regulator-name = "BUCKCORE"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "BUCKPRO"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2075000>; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "BUCKMEM"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + buck4_reg: buck4 { + regulator-name = "BUCKPERI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "ldo1_1v3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2_1v3"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "ldo3_3v3"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "ldo4_2v775"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-name = "ldo5_3v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-name = "ldo6_1v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo7_reg: ldo7 { + regulator-name = "ldo7_2v75"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "ldo8_1v8"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + + ldo9_reg: ldo9 { + regulator-name = "ldo9_1v5"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + regulator-always-on; + }; + + ldo10_reg: ldo10 { + regulator-name = "ldo10_1v3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-always-on; + }; + }; + }; + +}; + +&esdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3>; + bus-width = <8>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_3v3>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + status = "okay"; + + i2c-mux@70 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; + + i2c4: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0xa>; + #sound-dai-cells = <0>; + VDDA-supply = <®_sgtl5k>; + VDDIO-supply = <®_sgtl5k>; + clocks = <&cko2_11M>; + status = "okay"; + }; + }; + + i2c5: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + + temp@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + }; + + mma8453q: accelerometer@1c { + compatible = "fsl,mma8453"; + reg = <0x1c>; + interrupt-parent = <&gpio1>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-names = "INT1"; + }; + + mpl3115: pressure-sensor@60 { + compatible = "fsl,mpl3115"; + reg = <0x60>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; + }; + + i2c6: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c7: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + + i2c8: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + }; + + i2c9: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c10: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + }; + + i2c11: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + status = "okay"; + + touchscreen@4b { + compatible = "atmel,maxtouch"; + reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>; + reg = <0x4b>; + interrupt-parent = <&gpio5>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c3 { + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_gpio>; + sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + status = "okay"; + + port@2 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pmu { + secure-reg-access; +}; + +&pwm1 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + fsl,dma-info = <24 20>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,dma-info = <4096 4>; + status = "okay"; +}; + +&usbotg { + dr_mode = "otg"; + phy_type = "utmi"; + vbus-supply = <®_usb_otg_vbus>; + pinctrl-0 = <&pinctrl_usb_otg>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_vbus>; + phy_type = "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + phy_type = "ulpi"; + dr_mode = "host"; + fsl,usbphy = <&usbphy2>; + vbus-supply = <®_usbh2_vbus>; + status = "okay"; +}; + +&usbh3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh3>; + phy_type = "ulpi"; + dr_mode = "host"; + vbus-supply = <®_usbh3_vbus>; + fsl,usbphy = <&usbphy3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_rev6>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD 0x400 + MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD 0x400 + MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC 0x400 + MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS 0x400 + MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC 0x400 + MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS 0x400 + MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD 0x400 + MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD 0x400 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX53_PAD_DISP0_DAT21__ECSPI1_MOSI 0x400 + MX53_PAD_DISP0_DAT22__ECSPI1_MISO 0x400 + MX53_PAD_DISP0_DAT20__ECSPI1_SCLK 0x400 + /* ECSPI1_SS0, must treat as GPIO for EzPort */ + MX53_PAD_DISP0_DAT23__GPIO5_17 0x400 + MX53_PAD_KEY_COL2__GPIO4_10 0x0 + MX53_PAD_KEY_ROW2__GPIO4_11 0x0 + MX53_PAD_KEY_COL3__GPIO4_12 0x0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0x0 + MX53_PAD_EIM_OE__ECSPI2_MISO 0x0 + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0x0 + MX53_PAD_EIM_RW__GPIO2_26 0x0 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + >; + }; + + pinctrl_esdhc3: esdhc3grp { + fsl,pins = < + MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5 + MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5 + MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5 + MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5 + MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5 + MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5 + MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5 + MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5 + MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5 + MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX53_PAD_FEC_MDC__FEC_MDC 0x0 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x0 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x0 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x0 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x0 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x0 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x0 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x0 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x0 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x0 + >; + }; + + pinctrl_hog_rev6: hoggrp { + fsl,pins = < + /* CKO2 */ + MX53_PAD_GPIO_3__CCM_CLKO2 0x4 + /* DEFIB_SYNC_MARKER_IN_IRQ */ + MX53_PAD_GPIO_5__GPIO1_5 0x0 + /* ACCELEROMETER_DATA_RDY_N */ + MX53_PAD_GPIO_6__GPIO1_6 0x0 + /* TEMPERATURE_ALERT_N */ + MX53_PAD_GPIO_7__GPIO1_7 0x0 + /* BAROMETRIC_PRESSURE_DATA_RDY_N */ + MX53_PAD_GPIO_8__GPIO1_8 0x0 + /* DOCKING_I2C_INTERFACE_IRQ_N */ + MX53_PAD_PATA_DATA4__GPIO2_4 0x0 + /* PWR_OUT_TO_DOCK_FAULT_N */ + MX53_PAD_PATA_DATA5__GPIO2_5 0x0 + /* ENABLE_PWR_TO_DOCK_N */ + MX53_PAD_PATA_DATA6__GPIO2_6 0x0 + /* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */ + MX53_PAD_PATA_DATA7__GPIO2_7 0x0 + /* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */ + MX53_PAD_PATA_DATA12__GPIO2_12 0x0 + /* DOCK_PRESENT_N */ + MX53_PAD_PATA_DATA13__GPIO2_13 0x0 + /* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */ + MX53_PAD_PATA_DATA14__GPIO2_14 0x0 + /* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */ + MX53_PAD_PATA_DATA15__GPIO2_15 0x0 + /* RESET_IMX535_ETHERNET_PHY_N */ + MX53_PAD_EIM_A22__GPIO2_16 0x0 + /* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */ + MX53_PAD_EIM_A21__GPIO2_17 0x0 + /* RESET_I2C1_BUS_SEGMENT_MUX_N */ + MX53_PAD_EIM_A20__GPIO2_18 0x0 + /* RESET_IMX535_USB_HOST3_PHY_N */ + MX53_PAD_EIM_A19__GPIO2_19 0x0 + /* ESDHC3_EMMC_NAND_RST_N */ + MX53_PAD_EIM_A18__GPIO2_20 0x0 + /* LCD_AND_UI_INTERFACE_PWR_FAULT_N */ + MX53_PAD_EIM_A17__GPIO2_21 0x0 + /* POWER_DOWN_LVDS0_DESERIALIZER_N */ + MX53_PAD_EIM_A16__GPIO2_22 0x0 + /* POWER_DOWN_LVDS1_DESERIALIZER_N */ + MX53_PAD_EIM_LBA__GPIO2_27 0x0 + /* RESET_DP0_TRANSMITTER_N */ + MX53_PAD_EIM_EB0__GPIO2_28 0x0 + /* RESET_DP1_TRANSMITTER_N */ + MX53_PAD_EIM_EB1__GPIO2_29 0x0 + /* ENABLE_SPDIF_AUDIO_TO_DP0 */ + MX53_PAD_EIM_DA0__GPIO3_0 0x0 + /* ENABLE_SPDIF_AUDIO_TO_DP1 */ + MX53_PAD_EIM_DA1__GPIO3_1 0x0 + /* LVDS1_MUX_CTRL */ + MX53_PAD_EIM_DA2__GPIO3_2 0x0 + /* LVDS0_MUX_CTRL */ + MX53_PAD_EIM_DA3__GPIO3_3 0x0 + /* DP1_TRANSMITTER_IRQ */ + MX53_PAD_EIM_DA4__GPIO3_4 0x0 + /* DP0_TRANSMITTER_IRQ */ + MX53_PAD_EIM_DA5__GPIO3_5 0x0 + /* USB_RESET_N */ + MX53_PAD_EIM_DA6__GPIO3_6 0x0 + /* ENABLE_BATTERY_CHARGER */ + MX53_PAD_EIM_DA7__GPIO3_7 0x0 + /* SOFTWARE_CONTROLLED_PWR_CYCLE */ + MX53_PAD_EIM_DA8__GPIO3_8 0x0 + /* SOFTWARE_CONTROLLED_POWERDOWN */ + MX53_PAD_EIM_DA9__GPIO3_9 0x0 + /* DC_PWR_IN_OK */ + MX53_PAD_EIM_DA10__GPIO3_10 0x0 + /* BATT_PRESENT_N */ + MX53_PAD_EIM_DA11__GPIO3_11 0xe4 + /* PMIC_IRQ_N */ + MX53_PAD_EIM_DA12__GPIO3_12 0x0 + /* PMIC_VDD_FAULT_STATUS_N */ + MX53_PAD_EIM_DA13__GPIO3_13 0x0 + /* IMX535_ETHERNET_PHY_STATUS_IRQ_N */ + MX53_PAD_EIM_DA14__GPIO3_14 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_DA15__GPIO3_15 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_D22__GPIO3_22 0x0 + /* NOT USED - AVAILABLE 3.3V GPIO */ + MX53_PAD_EIM_D24__GPIO3_24 0x0 + /* NBP_PUMP_VALVE_PWR_ENABLE */ + MX53_PAD_EIM_D25__GPIO3_25 0x0 + /* NIBP_RESET_N */ + MX53_PAD_EIM_D26__GPIO3_26 0x0 + /* LATCHED_OVERPRESSURE_N */ + MX53_PAD_EIM_D27__GPIO3_27 0x0 + /* NBP_SBWTCLK */ + MX53_PAD_EIM_D29__GPIO3_29 0x0 + /* ENABLE_WIFI_MODULE */ + MX53_PAD_GPIO_11__GPIO4_1 0x400 + /* WIFI_MODULE_IRQ_N */ + MX53_PAD_GPIO_12__GPIO4_2 0x400 + /* ENABLE_BLUETOOTH_MODULE */ + MX53_PAD_GPIO_13__GPIO4_3 0x400 + /* RESET_IMX535_USB_HOST2_PHY_N */ + MX53_PAD_GPIO_14__GPIO4_4 0x400 + /* ONKEY_IS_DEPRESSED */ + MX53_PAD_KEY_ROW3__GPIO4_13 0x0 + /* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */ + MX53_PAD_EIM_WAIT__GPIO5_0 0x0 + /* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */ + MX53_PAD_EIM_A25__GPIO5_2 0x0 + /* I2C_PCAP_TOUCHSCREEN_IRQ_N */ + MX53_PAD_EIM_A24__GPIO5_4 0x0 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT13__GPIO5_7 0x400 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT14__GPIO5_8 0x400 + /* NOT USED - AVAILABLE 1.8V GPIO */ + MX53_PAD_DISP0_DAT15__GPIO5_9 0x400 + /* HOST_CONTROLLED_RESET_TO_LCD_N */ + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x0 + /* HOST_CONTROLLED_RESET_TO_PCAP_N */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x0 + /* LR_SCAN_CTRL */ + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x0 + /* UD_SCAN_CTRL */ + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x0 + /* DATA_WIDTH_CTRL */ + MX53_PAD_CSI0_DAT10__GPIO5_28 0x0 + /* BACKLIGHT_ENABLE */ + MX53_PAD_CSI0_DAT11__GPIO5_29 0x0 + /* MED_USB_PORT_1_HOST_SELECT */ + MX53_PAD_EIM_A23__GPIO6_6 0x0 + /* MED_USB_PORT_2_HOST_SELECT */ + MX53_PAD_NANDF_CLE__GPIO6_7 0x0 + /* MED_USB_PORT_3_HOST_SELECT */ + MX53_PAD_NANDF_ALE__GPIO6_8 0x0 + /* MED_USB_PORT_4_HOST_SELECT */ + MX53_PAD_NANDF_WP_B__GPIO6_9 0x0 + /* MED_USB_PORT_5_HOST_SELECT */ + MX53_PAD_NANDF_RB0__GPIO6_10 0x0 + /* MED_USB_PORT_6_HOST_SELECT */ + MX53_PAD_NANDF_CS0__GPIO6_11 0x0 + /* MED_USB_PORT_7_HOST_SELECT */ + MX53_PAD_NANDF_WE_B__GPIO6_12 0x0 + /* MED_USB_PORT_8_HOST_SELECT */ + MX53_PAD_NANDF_RE_B__GPIO6_13 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_0 */ + MX53_PAD_NANDF_CS1__GPIO6_14 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_1 */ + MX53_PAD_NANDF_CS2__GPIO6_15 0x0 + /* MED_USB_PORT_TO_IMX_SELECT_2 */ + MX53_PAD_NANDF_CS3__GPIO6_16 0x0 + /* POWER_AND_BOOT_STATUS_INDICATOR */ + MX53_PAD_PATA_INTRQ__GPIO7_2 0x1e4 + /* RUNNING_ON_BATTERY_INDICATOR_GREEN */ + MX53_PAD_GPIO_16__GPIO7_11 0x0 + /* BATTERY_STATUS_INDICATOR_AMBER */ + MX53_PAD_GPIO_17__GPIO7_12 0x0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4 + MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4 + >; + }; + + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D28__GPIO3_28 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_EIM_EB2__I2C2_SCL 0x400001e4 + MX53_PAD_EIM_D16__I2C2_SDA 0x400001e4 + >; + }; + + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D16__GPIO3_16 0x1e4 + MX53_PAD_EIM_EB2__GPIO2_30 0x1e4 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX53_PAD_EIM_D17__I2C3_SCL 0x400001e4 + MX53_PAD_EIM_D18__I2C3_SDA 0x400001e4 + >; + }; + + pinctrl_i2c3_gpio: i2c3gpiogrp { + fsl,pins = < + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX53_PAD_GPIO_9__PWM1_PWMO 0x5 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX53_PAD_DISP0_DAT9__PWM2_PWMO 0x5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 + MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_EIM_D23__UART3_CTS 0x1e4 + MX53_PAD_EIM_EB3__UART3_RTS 0x1e4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4 + MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4 + >; + }; + + pinctrl_usb_otg_vbus: usb-otg-vbusgrp { + fsl,pins = < + /* USB_HS_OTG_VBUS_ENABLE */ + MX53_PAD_KEY_ROW4__GPIO4_15 0x1c4 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + /* USB H2 */ + MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180 + MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180 + MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180 + MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180 + MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180 + MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180 + MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180 + MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180 + MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP 0x180 + MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT 0x180 + MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK 0x180 + MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR 0x5 + MX53_PAD_EIM_D30__USBOH3_USBH2_OC 0x180 + >; + }; + + pinctrl_usbh2_vbus: usbh2-vbusgrp { + fsl,pins = < + /* USB_HS_HOST2_VBUS_ENABLE */ + MX53_PAD_EIM_D31__GPIO3_31 0x0 + >; + }; + + pinctrl_usbh3_vbus: usbh3-vbusgrp { + fsl,pins = < + /* USB_HS_HOST3_VBUS_ENABLE */ + MX53_PAD_CSI0_DAT9__GPIO5_27 0x0 + >; + }; + + pinctrl_usbh3: usbh3grp { + fsl,pins = < + /* USB H3 */ + MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180 + MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180 + MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180 + MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180 + MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180 + MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180 + MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180 + MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180 + MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR 0x5 + MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK 0x180 + MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT 0x180 + MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP 0x180 + MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC 0x180 + >; + }; + + pinctrl_usb_otg: usbotggrp { + fsl,pins = < + /* USB_OTG_FAULT_N */ + MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC 0x180 + >; + }; + + pinctrl_alarmled_pins: qmx6alarmledgrp { + fsl,pins = < + /* ACTIVATE_ALARM_LIGHT_RED */ + MX53_PAD_PATA_DIOR__GPIO7_3 0x0 + /* ACTIVATE_ALARM_LIGHT_YELLOW */ + MX53_PAD_PATA_DA_1__GPIO7_7 0x0 + /* ACTIVATE_ALARM_LIGHT_CYAN */ + MX53_PAD_PATA_DA_2__GPIO7_8 0x0 + /* AUDIO_ALARMS_SILENCED_INDICATOR */ + MX53_PAD_GPIO_18__GPIO7_13 0x0 + >; + }; +}; |