Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 535 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
new file mode 100644
index 000000000..78555a618
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+		rtc0 = &rtc0;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper: gpio-beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobeeper>;
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button1 {
+			label = "s6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button2 {
+			label = "s7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button3 {
+			label = "s8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_mba6_3p3v: regulator-mba6-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
+		regulator-name = "supply-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* PCIE.PWR_EN */
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reg_vcc3v3_audio: regulator-vcc3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-audio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi0 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+				IMX_AUDMUX_V2_PTCR_TFSDIR |
+				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+				IMX_AUDMUX_V2_PTCR_TCLKDIR |
+				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <100000>;
+			micrel,force-master;
+			max-speed = <1000>;
+		};
+	};
+};
+
+&i2c1 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		ldoin-supply = <&reg_vcc3v3_audio>;
+		iov-supply = <&reg_mba6_3p3v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	power-active-high;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/* does not work on unmodified starter kit */
+	/* fsl,ext-reset-output; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+		>;
+	};
+
+	pinctrl_ecspi1_mba6: ecspimba6grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* FEC phy IRQ */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+			/* FEC phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+			/* DSE = 100, 100k up, SPEED = MED */
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+			/* DSE = 111, pull 100k up */
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+			/* DSE = 111, pull external */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+		>;
+	};
+
+	pinctrl_gpiobeeper: gpiobeepergrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+		>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			 /* Watchdog out */
+			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+		>;
+	};
+};