Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 517 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
new file mode 100644
index 000000000..230cb344b
--- /dev/null
+++ b/arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus-pincfg.dtsi
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2019 Quanta Computer Inc. Samuel.Jiang@quantatw.com
+
+/ {
+	pinctrl: pinctrl@f0800000 {
+		gpio0ol_pins: gpio0ol-pins {
+			pins = "GPIO0/IOX1DI";
+			bias-disable;
+			output-low;
+		};
+		gpio1ol_pins: gpio1ol-pins {
+			pins = "GPIO1/IOX1LD";
+			bias-disable;
+			output-low;
+		};
+		gpio2ol_pins: gpio2ol-pins {
+			pins = "GPIO2/IOX1CK";
+			bias-disable;
+			output-low;
+		};
+		gpio3ol_pins: gpio3ol-pins {
+			pins = "GPIO3/IOX1D0";
+			bias-disable;
+			output-low;
+		};
+		gpio5_pins: gpio5-pins {
+			pins = "GPIO5/IOX2LD/SMB1DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio6_pins: gpio6-pins {
+			pins = "GPIO6/IOX2CK/SMB2DSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio7_pins: gpio7-pins {
+			pins = "GPIO7/IOX2D0/SMB2DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio8o_pins: gpio8o-pins {
+			pins = "GPIO8/LKGPO1";
+			bias-disable;
+			output-high;
+		};
+		gpio9ol_pins: gpio9ol-pins {
+			pins = "GPIO9/LKGPO2";
+			bias-disable;
+			output-low;
+		};
+		gpio10_pins: gpio10-pins {
+			pins = "GPIO10/IOXHLD";
+			bias-disable;
+			input-enable;
+		};
+		gpio11_pins: gpio11-pins {
+			pins = "GPIO11/IOXHCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio12ol_pins: gpio12ol-pins {
+			pins = "GPIO12/GSPICK/SMB5BSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio13ol_pins: gpio13ol-pins {
+			pins = "GPIO13/GSPIDO/SMB5BSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio14ol_pins: gpio14ol-pins {
+			pins = "GPIO14/GSPIDI/SMB5CSCL";
+			bias-disable;
+			output-low;
+		};
+		gpio15ol_pins: gpio15ol-pins {
+			pins = "GPIO15/GSPICS/SMB5CSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio20_pins: gpio20-pins {
+			pins = "GPIO20/SMB4CSDA/SMB15SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio21_pins: gpio21-pins {
+			pins = "GPIO21/SMB4CSCL/SMB15SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio22o_pins: gpio22o-pins {
+			pins = "GPIO22/SMB4DSDA/SMB14SDA";
+			bias-disable;
+			output-high;
+		};
+		gpio23_pins: gpio23-pins {
+			pins = "GPIO23/SMB4DSCL/SMB14SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio24_pins: gpio24-pins {
+			pins = "GPIO24/IOXHDO";
+			bias-disable;
+			input-enable;
+		};
+		gpio25_pins: gpio25-pins {
+			pins = "GPIO25/IOXHDI";
+			bias-disable;
+			input-enable;
+		};
+		gpio30_pins: gpio30-pins {
+			pins = "GPIO30/SMB3SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio31_pins: gpio31-pins {
+			pins = "GPIO31/SMB3SCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio37o_pins: gpio37o-pins {
+			pins = "GPIO37/SMB3CSDA";
+			bias-disable;
+			output-high;
+		};
+		gpio38_pins: gpio38-pins {
+			pins = "GPIO38/SMB3CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio39_pins: gpio39-pins {
+			pins = "GPIO39/SMB3BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio40o_pins: gpio40o-pins {
+			pins = "GPIO40/SMB3BSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio59_pins: gpio59-pins {
+			pins = "GPIO59/SMB3DSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio76_pins: gpio76-pins {
+			pins = "GPIO76/FANIN12";
+			bias-disable;
+			input-enable;
+		};
+		gpio77_pins: gpio77-pins {
+			pins = "GPIO77/FANIN13";
+			bias-disable;
+			input-enable;
+		};
+		gpio78o_pins: gpio78o-pins {
+			pins = "GPIO78/FANIN14";
+			bias-disable;
+			output-high;
+		};
+		gpio79_pins: gpio79-pins {
+			pins = "GPIO79/FANIN15";
+			bias-disable;
+			input-enable;
+		};
+		gpio82_pins: gpio82-pins {
+			pins = "GPIO82/PWM2";
+			bias-disable;
+			input-enable;
+		};
+		gpio83_pins: gpio83-pins {
+			pins = "GPIO83/PWM3";
+			bias-disable;
+			input-enable;
+		};
+		gpio84_pins: gpio84-pins {
+			pins = "GPIO84/R2TXD0";
+			bias-disable;
+			input-enable;
+		};
+		gpio85o_pins: gpio85o-pins {
+			pins = "GPIO85/R2TXD1";
+			bias-disable;
+			output-high;
+		};
+		gpio86ol_pins: gpio86ol-pins {
+			pins = "GPIO86/R2TXEN";
+			bias-disable;
+			output-low;
+		};
+		gpio87_pins: gpio87-pins {
+			pins = "GPIO87/R2RXD0";
+			bias-disable;
+			input-enable;
+		};
+		gpio88_pins: gpio88-pins {
+			pins = "GPIO88/R2RXD1";
+			bias-disable;
+			input-enable;
+		};
+		gpio89_pins: gpio89-pins {
+			pins = "GPIO89/R2CRSDV";
+			bias-disable;
+			input-enable;
+		};
+		gpio90_pins: gpio90-pins {
+			pins = "GPIO90/R2RXERR";
+			bias-disable;
+			input-enable;
+		};
+		gpio93_pins: gpio93-pins {
+			pins = "GPIO93/GA20/SMB5DSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio94ol_pins: gpio94ol-pins {
+			pins = "GPIO94/nKBRST/SMB5DSDA";
+			bias-disable;
+			output-low;
+		};
+		gpio108ol_pins: gpio108ol-pins {
+			pins = "GPIO108/RG1MDC";
+			bias-disable;
+			output-low;
+		};
+		gpio109ol_pins: gpio109ol-pins {
+			pins = "GPIO109/RG1MDIO";
+			bias-disable;
+			output-low;
+		};
+		gpio110ol_pins: gpio110ol-pins {
+			pins = "GPIO110/RG2TXD0/DDRV0";
+			bias-disable;
+			output-low;
+		};
+		gpio111ol_pins: gpio111ol-pins {
+			pins = "GPIO111/RG2TXD1/DDRV1";
+			bias-disable;
+			output-low;
+		};
+		gpio112ol_pins: gpio112ol-pins {
+			pins = "GPIO112/RG2TXD2/DDRV2";
+			bias-disable;
+			output-low;
+		};
+		gpio113ol_pins: gpio113ol-pins {
+			pins = "GPIO113/RG2TXD3/DDRV3";
+			bias-disable;
+			output-low;
+		};
+		gpio114o_pins: gpio114o-pins {
+			pins = "GPIO114/SMB0SCL";
+			bias-disable;
+			output-high;
+		};
+		gpio115_pins: gpio115-pins {
+			pins = "GPIO115/SMB0SDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio120_pins: gpio120-pins {
+			pins = "GPIO120/SMB2CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio121_pins: gpio121-pins {
+			pins = "GPIO121/SMB2CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio122_pins: gpio122-pins {
+			pins = "GPIO122/SMB2BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio123_pins: gpio123-pins {
+			pins = "GPIO123/SMB2BSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio124_pins: gpio124-pins {
+			pins = "GPIO124/SMB1CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio125_pins: gpio125-pins {
+			pins = "GPIO125/SMB1CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio126_pins: gpio126-pins {
+			pins = "GPIO126/SMB1BSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio127o_pins: gpio127o-pins {
+			pins = "GPIO127/SMB1BSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio136_pins: gpio136-pins {
+			pins = "GPIO136/SD1DT0";
+			bias-disable;
+			input-enable;
+		};
+		gpio137_pins: gpio137-pins {
+			pins = "GPIO137/SD1DT1";
+			bias-disable;
+			input-enable;
+		};
+		gpio138_pins: gpio138-pins {
+			pins = "GPIO138/SD1DT2";
+			bias-disable;
+			input-enable;
+		};
+		gpio139_pins: gpio139-pins {
+			pins = "GPIO139/SD1DT3";
+			bias-disable;
+			input-enable;
+		};
+		gpio140_pins: gpio140-pins {
+			pins = "GPIO140/SD1CLK";
+			bias-disable;
+			input-enable;
+		};
+		gpio141_pins: gpio141-pins {
+			pins = "GPIO141/SD1WP";
+			bias-disable;
+			input-enable;
+		};
+		gpio142_pins: gpio142-pins {
+			pins = "GPIO142/SD1CMD";
+			bias-disable;
+			input-enable;
+		};
+		gpio143_pins: gpio143-pins {
+			pins = "GPIO143/SD1CD/SD1PWR";
+			bias-disable;
+			input-enable;
+		};
+		gpio144_pins: gpio144-pins {
+			pins = "GPIO144/PWM4";
+			bias-disable;
+			input-enable;
+		};
+		gpio145_pins: gpio145-pins {
+			pins = "GPIO145/PWM5";
+			bias-disable;
+			input-enable;
+		};
+		gpio146_pins: gpio146-pins {
+			pins = "GPIO146/PWM6";
+			bias-disable;
+			input-enable;
+		};
+		gpio147_pins: gpio147-pins {
+			pins = "GPIO147/PWM7";
+			bias-disable;
+			input-enable;
+		};
+		gpio153o_pins: gpio153o-pins {
+			pins = "GPIO153/MMCWP";
+			bias-disable;
+			output-high;
+		};
+		gpio155_pins: gpio155-pins {
+			pins = "GPIO155/nMMCCD/nMMCRST";
+			bias-disable;
+			input-enable;
+		};
+		gpio160o_pins: gpio160o-pins {
+			pins = "GPIO160/CLKOUT/RNGOSCOUT";
+			bias-disable;
+			output-high;
+		};
+		gpio169o_pins: gpio169o-pins {
+			pins = "GPIO169/nSCIPME";
+			bias-disable;
+			output-high;
+		};
+		gpio188o_pins: gpio188o-pins {
+			pins = "GPIO188/SPI3D2/nSPI3CS2";
+			bias-disable;
+			output-high;
+		};
+		gpio189_pins: gpio189-pins {
+			pins = "GPIO189/SPI3D3/nSPI3CS3";
+			bias-disable;
+			input-enable;
+		};
+		gpio196_pins: gpio196-pins {
+			pins = "GPIO196/SMB0CSCL";
+			bias-disable;
+			input-enable;
+		};
+		gpio197_pins: gpio197-pins {
+			pins = "GPIO197/SMB0DEN";
+			bias-disable;
+			input-enable;
+		};
+		gpio198o_pins: gpio198o-pins {
+			pins = "GPIO198/SMB0DSDA";
+			bias-disable;
+			output-high;
+		};
+		gpio199o_pins: gpio199o-pins {
+			pins = "GPIO199/SMB0DSCL";
+			bias-disable;
+			output-high;
+		};
+		gpio200_pins: gpio200-pins {
+			pins = "GPIO200/R2CK";
+			input-enable;
+			bias-disable;
+		};
+		gpio202_pins: gpio202-pins {
+			pins = "GPIO202/SMB0CSDA";
+			bias-disable;
+			input-enable;
+		};
+		gpio203o_pins: gpio203o-pins {
+			pins = "GPIO203/FANIN16";
+			bias-disable;
+			output-high;
+		};
+		gpio208_pins: gpio208-pins {
+			pins = "GPIO208/RG2TXC/DVCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio209ol_pins: gpio209ol-pins {
+			pins = "GPIO209/RG2TXCTL/DDRV4";
+			bias-disable;
+			output-low;
+		};
+		gpio210ol_pins: gpio210ol-pins {
+			pins = "GPIO210/RG2RXD0/DDRV5";
+			bias-disable;
+			output-low;
+		};
+		gpio211ol_pins: gpio211ol-pins {
+			pins = "GPIO211/RG2RXD1/DDRV6";
+			bias-disable;
+			output-low;
+		};
+		gpio212ol_pins: gpio212ol-pins {
+			pins = "GPIO212/RG2RXD2/DDRV7";
+			bias-disable;
+			output-low;
+		};
+		gpio213ol_pins: gpio213ol-pins {
+			pins = "GPIO213/RG2RXD3/DDRV8";
+			bias-disable;
+			output-low;
+		};
+		gpio214ol_pins: gpio214ol-pins {
+			pins = "GPIO214/RG2RXC/DDRV9";
+			bias-disable;
+			output-low;
+		};
+		gpio215ol_pins: gpio215ol-pins {
+			pins = "GPIO215/RG2RXCTL/DDRV10";
+			bias-disable;
+			output-low;
+		};
+		gpio216ol_pins: gpio216ol-pins {
+			pins = "GPIO216/RG2MDC/DDRV11";
+			bias-disable;
+			output-low;
+		};
+		gpio217ol_pins: gpio217ol-pins {
+			pins = "GPIO217/RG2MDIO/DVHSYNC";
+			bias-disable;
+			output-low;
+		};
+		gpio224_pins: gpio224-pins {
+			pins = "GPIO224/SPIXCK";
+			bias-disable;
+			input-enable;
+		};
+		gpio225ol_pins: gpio225ol-pins {
+			pins = "GPO225/SPIXD0/STRAP12";
+			bias-disable;
+			output-low;
+		};
+		gpio226ol_pins: gpio226ol-pins {
+			pins = "GPO226/SPIXD1/STRAP13";
+			bias-disable;
+			output-low;
+		};
+		gpio227ol_pins: gpio227ol-pins {
+			pins = "GPIO227/nSPIXCS0";
+			bias-disable;
+			output-low;
+		};
+		gpio228o_pins: gpio228ol-pins {
+			pins = "GPIO228/nSPIXCS1";
+			bias-disable;
+			output-high;
+		};
+		gpio229o_pins: gpio229o-pins {
+			pins = "GPO229/SPIXD2/STRAP3";
+			bias-disable;
+			output-high;
+		};
+		gpio230_pins: gpio230-pins {
+			pins = "GPIO230/SPIXD3";
+			bias-disable;
+			input-enable;
+		};
+		gpio231o_pins: gpio231o-pins {
+			pins = "GPIO231/nCLKREQ";
+			bias-disable;
+			output-high;
+		};
+	};
+};