Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 916 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
new file mode 100644
index 000000000..f628d3660
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -0,0 +1,916 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's S5PV210 based Galaxy Aries board device tree source
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "s5pv210.dtsi"
+
+/ {
+	compatible = "samsung,aries", "samsung,s5pv210";
+
+	aliases: aliases {
+		i2c4 = &i2c_sound;
+		i2c5 = &i2c_accel;
+		i2c6 = &i2c_pmic;
+		i2c7 = &i2c_musb;
+		i2c9 = &i2c_fuel;
+		i2c10 = &i2c_touchkey;
+		i2c11 = &i2c_prox;
+		i2c12 = &i2c_magnetometer;
+	};
+
+	memory@30000000 {
+		device_type = "memory";
+		reg = <0x30000000 0x05000000>,
+			<0x40000000 0x10000000>,
+			<0x50000000 0x08000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region@43000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x43000000 0x2000000>;
+		};
+
+		mfc_right: region@51000000 {
+			compatible = "shared-dma-pool";
+			no-map;
+			reg = <0x51000000 0x2000000>;
+		};
+	};
+
+	pmic_ap_clk: clock-0 {
+		/* Workaround for missing clock on PMIC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	bt_codec: bt-sco {
+		compatible = "linux,bt-sco";
+		#sound-dai-cells = <0>;
+	};
+
+	vibrator_pwr: regulator-fixed-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vibrator-en";
+		enable-active-high;
+		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_ena>;
+	};
+
+	touchkey_vdd: regulator-fixed-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VTOUCH_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_vdd_ena>;
+	};
+
+	gp2a_vled: regulator-fixed-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VLED";
+		enable-active-high;
+		gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gp2a_power>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_gpio_rst>;
+		post-power-on-delay-ms = <500>;
+		power-off-delay-us = <500>;
+	};
+
+	i2c_sound: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sound_i2c_pins>;
+
+		wm8994: audio-codec@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+
+			#sound-dai-cells = <0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			clocks = <&clocks MOUT_CLKOUT>;
+			clock-names = "MCLK1";
+
+			AVDD2-supply = <&buck3_reg>;
+			DBVDD-supply = <&buck3_reg>;
+			CPVDD-supply = <&buck3_reg>;
+			SPKVDD1-supply = <&buck3_reg>;
+			SPKVDD2-supply = <&buck3_reg>;
+
+			wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
+					0xa101 0x0100 0x8100 0x0100 0x0100
+					0x0100>;
+
+			wlf,ldo1ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena-gpios = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+
+			wlf,lineout1-se;
+			wlf,lineout2-se;
+
+			assigned-clocks = <&clocks MOUT_CLKOUT>;
+			assigned-clock-rates = <0>;
+			assigned-clock-parents = <&xusbxti>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_ldo>;
+		};
+	};
+
+	i2c_accel: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_i2c_pins>;
+
+		accelerometer@38 {
+			compatible = "bosch,bma023";
+			reg = <0x38>;
+
+			vdd-supply = <&ldo9_reg>;
+			vddio-supply = <&ldo9_reg>;
+		};
+	};
+
+	i2c_pmic: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_i2c_pins>;
+
+		pmic@66 {
+			compatible = "maxim,max8998";
+			reg = <0x66>;
+			interrupt-parent = <&gph0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			max8998,pmic-buck1-default-dvs-idx = <1>;
+			max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>,
+							<&gph0 4 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>,
+							<1050000>, <950000>;
+
+			max8998,pmic-buck2-default-dvs-idx = <0>;
+			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
+			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
+
+			regulators {
+				ldo2_reg: LDO2 {
+					regulator-name = "VALIVE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VUSB_1.1V";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VADC_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VTF_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "LDO6";
+					regulator-min-microvolt = <1600000>;
+					regulator-max-microvolt = <3600000>;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VLCD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VUSB_3.3V";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VCC_2.8V_PDA";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VPLL_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "CAM_AF_3.0V";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "CAM_SENSOR_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VGA_VDDIO_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VGA_DVDD_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "CAM_ISP_HOST_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VGA_AVDD_2.8V";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VCC_3.0V_LCD";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vddarm";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-suspend-microvolt = <1250000>;
+					};
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vddint";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1500000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-suspend-microvolt = <1100000>;
+					};
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "VCC_1.8V";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "CAM_ISP_CORE_1.2V";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				ap32khz_reg: EN32KHz-AP {
+					regulator-name = "32KHz AP";
+					regulator-always-on;
+				};
+
+				cp32khz_reg: EN32KHz-CP {
+					regulator-name = "32KHz CP";
+				};
+
+				vichg_reg: ENVICHG {
+					regulator-name = "VICHG";
+					regulator-always-on;
+				};
+
+				safe1_sreg: ESAFEOUT1 {
+					regulator-name = "SAFEOUT1";
+				};
+
+				safe2_sreg: ESAFEOUT2 {
+					regulator-name = "SAFEOUT2";
+				};
+			};
+		};
+	};
+
+	i2c_musb: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&musb_i2c_pins>;
+
+		fsa9480: musb@25 {
+			compatible = "fcs,fsa9480";
+			reg = <0x25>;
+			interrupt-parent = <&gph2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&musb_irq>;
+		};
+	};
+
+	i2c_fuel: i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_i2c_pins>;
+
+		fg: fuelgauge@36 {
+			compatible = "maxim,max17040";
+			reg = <0x36>;
+		};
+	};
+
+	i2c_touchkey: i2c-gpio-5 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_i2c_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_vdd>;
+			vcc-supply = <&buck3_reg>;
+			linux,keycodes = <KEY_MENU KEY_BACK
+					  KEY_HOMEPAGE KEY_SEARCH>;
+			interrupt-parent = <&gpj4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_irq>;
+		};
+	};
+
+	i2c_prox: i2c-gpio-6 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_i2c_pins>;
+
+		light-sensor@44 {
+			compatible = "sharp,gp2ap002a00f";
+			reg = <0x44>;
+			interrupt-parent = <&gph0>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&gp2a_vled>;
+			vio-supply = <&gp2a_vled>;
+			io-channels = <&gp2a_shunt>;
+			io-channel-names = "alsout";
+			sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+			sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&gp2a_irq>;
+		};
+	};
+
+	i2c_magnetometer: i2c-gpio-7 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&magnetometer_i2c_pins>;
+
+		status = "disabled";
+
+		/* Yamaha yas529 magnetometer, no mainline binding */
+	};
+
+	vibrator: pwm-vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm 1 44642 0>;
+		pwm-names = "enable";
+		vcc-supply = <&vibrator_pwr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_out>;
+	};
+
+	poweroff: syscon-poweroff {
+		compatible = "syscon-poweroff";
+		regmap = <&pmu_syscon>;
+		offset = <0x681c>; /* PS_HOLD_CONTROL */
+		value = <0x5200>;
+	};
+
+	spi_lcd: spi-2 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_spi_pins>;
+
+		panel@0 {
+			compatible = "samsung,s6e63m0";
+			reg = <0>;
+			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			spi-max-frequency = <1200000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_rst>;
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_ep>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+
+	status = "okay";
+
+	gp2a_shunt: current-sense-shunt {
+		compatible = "current-sense-shunt";
+		io-channels = <&adc 9>;
+		shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
+		#io-channel-cells = <0>;
+	};
+};
+
+&fimd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	status = "okay";
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@3 {
+		reg = <3>;
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo8_reg>;
+	vusb_d-supply = <&ldo3_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	samsung,i2c-slave-addr = <0x10>;
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		interrupt-parent = <&gpj0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_irq>;
+		reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2s0 {
+	dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>;
+	status = "okay";
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
+
+&pinctrl0 {
+	bt_reset: bt-reset-pins {
+		samsung,pins = "gpb-3";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	wlan_bt_en: wlan-bt-en-pins {
+		samsung,pins = "gpb-5";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-val = <1>;
+	};
+
+	codec_ldo: codec-ldo-pins {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+	};
+
+	prox_i2c_pins: gp2a-i2c-pins {
+		samsung,pins = "gpg0-2", "gpg2-2";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	wlan_gpio_rst: wlan-gpio-rst-pins {
+		samsung,pins = "gpg1-2";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+	};
+
+	bt_wake: bt-wake-pins {
+		samsung,pins = "gpg3-4";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+	};
+
+	gp2a_irq: gp2a-irq-pins {
+		samsung,pins = "gph0-2";
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_pins: pmic-dvs-pins {
+		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	pmic_irq: pmic-irq-pins {
+		samsung,pins = "gph0-7";
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	wifi_host_wake: wifi-host-wake-pins {
+		samsung,pins = "gph2-4";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	bt_host_wake: bt-host-wake-pins {
+		samsung,pins = "gph2-5";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	musb_irq: musq-irq-pins {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	tf_detect: tf-detect-pins {
+		samsung,pins = "gph3-4";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_DOWN>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	wifi_wake: wifi-wake-pins {
+		samsung,pins = "gph3-5";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+	};
+
+	magnetometer_i2c_pins: yas529-i2c-pins {
+		samsung,pins = "gpj0-0", "gpj0-1";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	ts_irq: ts-irq-pins {
+		samsung,pins = "gpj0-5";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	vibrator_ena: vibrator-ena-pins {
+		samsung,pins = "gpj1-1";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	gp2a_power: gp2a-power-pins {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	touchkey_i2c_pins: touchkey-i2c-pins {
+		samsung,pins = "gpj3-0", "gpj3-1";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	touchkey_vdd_ena: touchkey-vdd-ena-pins {
+		samsung,pins = "gpj3-2";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	musb_i2c_pins: musb-i2c-pins {
+		samsung,pins = "gpj3-4", "gpj3-5";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	accel_i2c_pins: accel-i2c-pins {
+		samsung,pins = "gpj3-6", "gpj3-7";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	pmic_i2c_pins: pmic-i2c-pins {
+		samsung,pins = "gpj4-0", "gpj4-3";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	touchkey_irq: touchkey-irq-pins {
+		samsung,pins = "gpj4-1";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	lcd_spi_pins: spi-lcd-pins {
+		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	fg_i2c_pins: fg-i2c-pins {
+		samsung,pins = "mp05-0", "mp05-1";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	sound_i2c_pins: sound-i2c-pins {
+		samsung,pins = "mp05-2", "mp05-3";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	panel_rst: panel-rst-pins {
+		samsung,pins = "mp05-5";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	samsung,pwm-outputs = <1>;
+};
+
+&rtc {
+	clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	max-frequency = <38400000>;
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>;
+	pinctrl-names = "default";
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
+	wlan@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gph2>;
+		interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhci2 {
+	bus-width = <4>;
+	cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&ldo5_reg>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+};
+
+&uart0 {
+	assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
+	assigned-clock-rates = <0>, <111166667>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4329-bt";
+		max-speed = <3000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
+			     &bt_reset &bt_wake>;
+		shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gph2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+	vbus-supply = <&safe1_sreg>;
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};