Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 448 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
new file mode 100644
index 000000000..532d3f5bc
--- /dev/null
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "s5pv210-aries.dtsi"
+
+/ {
+	model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
+	compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
+	chassis-type = "handset";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	nand_pwrseq: nand-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&massmemory_en>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "power";
+			gpios = <&gph2 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-vol-down {
+			label = "volume_down";
+			gpios = <&gph3 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		key-vol-up {
+			label = "volume_up";
+			gpios = <&gph3 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-home {
+			label = "home";
+			gpios = <&gph3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+	};
+
+	i2c_fmradio: i2c-gpio-8 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fm_i2c_pins>;
+
+		fmradio@10 {
+			compatible = "silabs,si470x";
+			reg = <0x10>;
+			interrupt-parent = <&gpj2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&fm_irq &fm_rst>;
+		};
+	};
+
+	micbias_reg: regulator-fixed-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "MICBIAS";
+		gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&micbias_reg_ena>;
+	};
+
+	sound {
+		compatible = "samsung,aries-wm8994";
+
+		model = "Aries";
+
+		extcon = <&fsa9480>;
+
+		main-micbias-supply = <&micbias_reg>;
+		headset-micbias-supply = <&micbias_reg>;
+
+		earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>;
+
+		io-channels = <&adc 3>;
+		io-channel-names = "headset-detect";
+		headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>;
+		headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>;
+
+		samsung,audio-routing =
+			"HP", "HPOUT1L",
+			"HP", "HPOUT1R",
+
+			"SPK", "SPKOUTLN",
+			"SPK", "SPKOUTLP",
+
+			"RCV", "HPOUT2N",
+			"RCV", "HPOUT2P",
+
+			"LINE", "LINEOUT2N",
+			"LINE", "LINEOUT2P",
+
+			"IN1LP", "Main Mic",
+			"IN1LN", "Main Mic",
+
+			"IN1RP", "Headset Mic",
+			"IN1RN", "Headset Mic",
+
+			"IN2LN", "FM In",
+			"IN2RN", "FM In",
+
+			"Modem Out", "Modem TX",
+			"Modem RX", "Modem In",
+
+			"Bluetooth SPK", "TX",
+			"RX", "Bluetooth Mic";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&headset_det &earpath_sel>;
+
+		cpu {
+			sound-dai = <&i2s0>, <&bt_codec>;
+		};
+
+		codec {
+			sound-dai = <&wm8994>;
+		};
+	};
+};
+
+&aliases {
+	i2c8 = &i2c_fmradio;
+};
+
+&pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	fm_i2c_pins: fm-i2c-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	headset_det: headset-det-pins {
+		samsung,pins = "gph0-6", "gph3-6";
+		samsung,pin-function = <S5PV210_PIN_FUNC_F>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+	};
+
+	fm_irq: fm-irq-pins {
+		samsung,pins = "gpj2-4";
+		samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_UP>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	fm_rst: fm-rst-pins {
+		samsung,pins = "gpj2-5";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	earpath_sel: earpath-sel-pins {
+		samsung,pins = "gpj2-6";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	massmemory_en: massmemory-en-pins {
+		samsung,pins = "gpj2-7";
+		samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	micbias_reg_ena: micbias-reg-ena-pins {
+		samsung,pins = "gpj4-2";
+		samsung,pin-pud = <S5PV210_PIN_PULL_NONE>;
+		samsung,pin-drv = <S5PV210_PIN_DRV_LV1>;
+	};
+
+	/* Based on CyanogenMod 3.0.101 kernel */
+	sleep_cfg: sleep-state {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, OUT0, NONE);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, OUT1, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, NONE);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, NONE);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, OUT0, NONE);
+		PIN_SLP(gpg0-1, INPUT, NONE);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, NONE);
+		PIN_SLP(gpg0-4, INPUT, NONE);
+		PIN_SLP(gpg0-5, INPUT, NONE);
+		PIN_SLP(gpg0-6, INPUT, NONE);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, OUT1, NONE);
+		PIN_SLP(gpg3-1, OUT0, NONE);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, UP);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, OUT1, NONE);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, INPUT, DOWN);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT1, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
+};
+
+&sdhci0 {
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&nand_pwrseq>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>;
+	assigned-clock-rates = <0>, <52000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+};