Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1167 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
new file mode 100644
index 000000000..14c35c12a
--- /dev/null
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -0,0 +1,1167 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Atmel SAMA5D2 family SoC";
+	compatible = "atmel,sama5d2";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a5";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a5-pmu";
+		interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+	};
+
+	etb@740000 {
+		compatible = "arm,coresight-etb10", "arm,primecell";
+		reg = <0x740000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		in-ports {
+			port {
+				etb_in: endpoint {
+					remote-endpoint = <&etm_out>;
+				};
+			};
+		};
+	};
+
+	etm@73c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x73c000 0x1000>;
+
+		clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+		clock-names = "apb_pclk";
+
+		out-ports {
+			port {
+				etm_out: endpoint {
+					remote-endpoint = <&etb_in>;
+				};
+			};
+		};
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x20000000>;
+	};
+
+	clocks {
+		slow_xtal: slow_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+
+		main_xtal: main_xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	ns_sram: sram@200000 {
+		compatible = "mmio-sram";
+		reg = <0x00200000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x20000>;
+	};
+
+	resistive_touch: resistive-touch {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+			      <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+		io-channel-names = "x", "y", "pressure";
+		touchscreen-min-pressure = <50000>;
+		status = "disabled";
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		nfc_sram: sram@100000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00100000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00100000 0x2400>;
+
+		};
+
+		usb0: gadget@300000 {
+			compatible = "atmel,sama5d3-udc";
+			reg = <0x00300000 0x100000
+			       0xfc02c000 0x400>;
+			interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+			clock-names = "pclk", "hclk";
+			status = "disabled";
+		};
+
+		usb1: ohci@400000 {
+			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+			reg = <0x00400000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
+			status = "disabled";
+		};
+
+		usb2: ehci@500000 {
+			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+			reg = <0x00500000 0x100000>;
+			interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
+			clock-names = "usb_clk", "ehci_clk";
+			status = "disabled";
+		};
+
+		L2: cache-controller@a00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00a00000 0x1000>;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x10000000 0x10000000
+			       0x60000000 0x30000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x60000000 0x10000000
+				  0x2 0x0 0x70000000 0x10000000
+				  0x3 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xa0000000 0x300>;
+			interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 31>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			compatible = "atmel,sama5d2-sdhci";
+			reg = <0xb0000000 0x300>;
+			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
+			clock-names = "hclock", "multclk", "baseclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 32>;
+			assigned-clock-rates = <480000000>;
+			status = "disabled";
+		};
+
+		nfc_io: nfc-io@c0000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0xc0000000 0x8000000>;
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hlcdc: hlcdc@f0000000 {
+				compatible = "atmel,sama5d2-hlcdc";
+				reg = <0xf0000000 0x2000>;
+				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					#pwm-cells = <3>;
+				};
+			};
+
+			isc: isc@f0008000 {
+				compatible = "atmel,sama5d2-isc";
+				reg = <0xf0008000 0x4000>;
+				interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
+				clock-names = "hclock", "iscck", "gck";
+				#clock-cells = <0>;
+				clock-output-names = "isc-mck";
+				status = "disabled";
+			};
+
+			ramc0: ramc@f000c000 {
+				compatible = "atmel,sama5d3-ddramc";
+				reg = <0xf000c000 0x200>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
+				clock-names = "ddrck", "mpddr";
+			};
+
+			dma0: dma-controller@f0010000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0010000 0x1000>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+				clock-names = "dma_clk";
+			};
+
+			/* Place dma1 here despite its address */
+			dma1: dma-controller@f0004000 {
+				compatible = "atmel,sama5d4-dma";
+				reg = <0xf0004000 0x1000>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
+				#dma-cells = <1>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+				clock-names = "dma_clk";
+			};
+
+			pmc: pmc@f0014000 {
+				compatible = "atmel,sama5d2-pmc", "syscon";
+				reg = <0xf0014000 0x160>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
+			};
+
+			qspi0: spi@f0020000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			qspi1: spi@f0024000 {
+				compatible = "atmel,sama5d2-qspi";
+				reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
+				clock-names = "pclk";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			sha: crypto@f0028000 {
+				compatible = "atmel,at91sam9g46-sha";
+				reg = <0xf0028000 0x100>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(30))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
+				clock-names = "sha_clk";
+			};
+
+			aes: crypto@f002c000 {
+				compatible = "atmel,at91sam9g46-aes";
+				reg = <0xf002c000 0x100>;
+				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(26))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(27))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+				clock-names = "aes_clk";
+			};
+
+			spi0: spi@f8000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xf8000000 0x100>;
+				interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(6))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(7))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@f8004000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf8004000 0x4000>;
+				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(21))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					AT91_XDMAC_DT_PERID(22))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
+				clock-names = "pclk";
+				status = "disabled";
+			};
+
+			macb0: ethernet@f8008000 {
+				compatible = "atmel,sama5d2-gem";
+				reg = <0xf8008000 0x1000>;
+				interrupts = <5  IRQ_TYPE_LEVEL_HIGH 3		/* Queue 0 */
+					      66 IRQ_TYPE_LEVEL_HIGH 3          /* Queue 1 */
+					      67 IRQ_TYPE_LEVEL_HIGH 3>;        /* Queue 2 */
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
+				clock-names = "hclk", "pclk";
+				status = "disabled";
+			};
+
+			tcb0: timer@f800c000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf800c000 0x100>;
+				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			tcb1: timer@f8010000 {
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0xf8010000 0x100>;
+				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
+			};
+
+			hsmc: hsmc@f8014000 {
+				compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+				reg = <0xf8014000 0x1000>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pmecc: ecc-engine@f8014070 {
+					compatible = "atmel,sama5d2-pmecc";
+					reg = <0xf8014070 0x490>,
+					      <0xf8014500 0x200>;
+				};
+			};
+
+			pdmic: pdmic@f8018000 {
+				compatible = "atmel,sama5d2-pdmic";
+				reg = <0xf8018000 0x124>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(50))>;
+				dma-names = "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			uart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(35))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(36))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(37))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(38))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(39))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(40))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			i2c0: i2c@f8028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xf8028000 0x100>;
+				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(0))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(1))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			pwm0: pwm@f802c000 {
+				compatible = "atmel,sama5d2-pwm";
+				reg = <0xf802c000 0x4000>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
+				#pwm-cells = <3>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+				status = "disabled";
+			};
+
+			sfr: sfr@f8030000 {
+				compatible = "atmel,sama5d2-sfr", "syscon";
+				reg = <0xf8030000 0x98>;
+			};
+
+			flx0: flexcom@f8034000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8034000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8034000 0x800>;
+				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx1: flexcom@f8038000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xf8038000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xf8038000 0x800>;
+				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			securam: sram@f8044000 {
+				compatible = "atmel,sama5d2-securam", "mmio-sram";
+				reg = <0xf8044000 0x1420>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				no-memory-wc;
+				ranges = <0 0xf8044000 0x1420>;
+			};
+
+			reset_controller: reset-controller@f8048000 {
+				compatible = "atmel,sama5d3-rstc";
+				reg = <0xf8048000 0x10>;
+				clocks = <&clk32k>;
+			};
+
+			shutdown_controller: shdwc@f8048010 {
+				compatible = "atmel,sama5d2-shdwc";
+				reg = <0xf8048010 0x10>;
+				clocks = <&clk32k>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				atmel,wakeup-rtc-timer;
+			};
+
+			pit: timer@f8048030 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xf8048030 0x10>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
+			};
+
+			watchdog: watchdog@f8048040 {
+				compatible = "atmel,sama5d4-wdt";
+				reg = <0xf8048040 0x10>;
+				interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+				status = "disabled";
+			};
+
+			clk32k: sckc@f8048050 {
+				compatible = "atmel,sama5d4-sckc";
+				reg = <0xf8048050 0x4>;
+
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
+			};
+
+			rtc: rtc@f80480b0 {
+				compatible = "atmel,sama5d2-rtc";
+				reg = <0xf80480b0 0x30>;
+				interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
+			};
+
+			i2s0: i2s@f8050000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xf8050000 0x100>;
+				interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(31))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(32))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
+				status = "disabled";
+			};
+
+			can0: can@f8054000 {
+				compatible = "bosch,m_can";
+				reg = <0xf8054000 0x4000>, <0x210000 0x1c00>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <64 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			spi1: spi@fc000000 {
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc000000 0x100>;
+				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(8))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(9))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
+				clock-names = "spi_clk";
+				atmel,fifo-size = <16>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			uart3: serial@fc008000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc008000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(41))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(42))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			uart4: serial@fc00c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc00c000 0x100>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(43))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(44))>;
+				dma-names = "tx", "rx";
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			flx2: flexcom@fc010000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc010000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc010000 0x800>;
+				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			flx3: flexcom@fc014000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc014000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc014000 0x800>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+			};
+
+			flx4: flexcom@fc018000 {
+				compatible = "atmel,sama5d2-flexcom";
+				reg = <0xfc018000 0x200>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0xfc018000 0x800>;
+				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi6: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+			};
+
+			trng@fc01c000 {
+				compatible = "atmel,at91sam9g45-trng";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+			};
+
+			aic: interrupt-controller@fc020000 {
+				#interrupt-cells = <3>;
+				compatible = "atmel,sama5d2-aic";
+				interrupt-controller;
+				reg = <0xfc020000 0x200>;
+				atmel,external-irqs = <49>;
+			};
+
+			i2c1: i2c@fc028000 {
+				compatible = "atmel,sama5d2-i2c";
+				reg = <0xfc028000 0x100>;
+				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(2))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(3))>;
+				dma-names = "tx", "rx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
+				atmel,fifo-size = <16>;
+				status = "disabled";
+			};
+
+			adc: adc@fc030000 {
+				compatible = "atmel,sama5d2-adc";
+				reg = <0xfc030000 0x100>;
+				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+				clock-names = "adc_clk";
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "rx";
+				atmel,min-sample-rate-hz = <200000>;
+				atmel,max-sample-rate-hz = <20000000>;
+				atmel,startup-time-ms = <4>;
+				atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			pioA: pinctrl@fc038000 {
+				compatible = "atmel,sama5d2-pinctrl";
+				reg = <0xfc038000 0x600>;
+				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <68 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <69 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <70 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			};
+
+			pioBU: secumod@fc040000 {
+				compatible = "atmel,sama5d2-secumod", "syscon";
+				reg = <0xfc040000 0x100>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			tdes: crypto@fc044000 {
+				compatible = "atmel,at91sam9g46-tdes";
+				reg = <0xfc044000 0x100>;
+				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(28))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(29))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+				clock-names = "tdes_clk";
+			};
+
+			classd: classd@fc048000 {
+				compatible = "atmel,sama5d2-classd";
+				reg = <0xfc048000 0x100>;
+				interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(47))>;
+				dma-names = "tx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
+				clock-names = "pclk", "gclk";
+				status = "disabled";
+			};
+
+			i2s1: i2s@fc04c000 {
+				compatible = "atmel,sama5d2-i2s";
+				reg = <0xfc04c000 0x100>;
+				interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(33))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+					 AT91_XDMAC_DT_PERID(34))>;
+				dma-names = "tx", "rx";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
+				clock-names = "pclk", "gclk";
+				assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
+				assigned-clock-parents = <&pmc PMC_TYPE_GCK 55>;
+				status = "disabled";
+			};
+
+			can1: can@fc050000 {
+				compatible = "bosch,m_can";
+				reg = <0xfc050000 0x4000>, <0x210000 0x3800>;
+				reg-names = "m_can", "message_ram";
+				interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
+					     <65 IRQ_TYPE_LEVEL_HIGH 7>;
+				interrupt-names = "int0", "int1";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
+				clock-names = "hclk", "cclk";
+				assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
+				assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+				assigned-clock-rates = <40000000>;
+				bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>;
+				status = "disabled";
+			};
+
+			sfrbu: sfr@fc05c000 {
+				compatible = "atmel,sama5d2-sfrbu", "syscon";
+				reg = <0xfc05c000 0x20>;
+			};
+
+			chipid@fc069000 {
+				compatible = "atmel,sama5d2-chipid";
+				reg = <0xfc069000 0x8>;
+			};
+		};
+	};
+};