Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1271 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
new file mode 100644
index 000000000..51a6464aa
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -0,0 +1,1271 @@
+/*
+ * Copyright 2012 Stefan Roese
+ * Stefan Roese <sr@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/clock/sun4i-a10-ccu.h>
+#include <dt-bindings/reset/sun4i-a10-ccu.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&intc>;
+
+	aliases {
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-hdmi {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_HDMI0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0";
+			clocks = <&ccu CLK_AHB_LCD0>, <&ccu CLK_AHB_DE_BE0>,
+				 <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DE_FE0>, <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+
+		framebuffer-fe0-lcd0-tve0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+			clocks = <&ccu CLK_AHB_TVE0>, <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_AHB_DE_FE0>,
+				 <&ccu CLK_DE_BE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_TCON0_CH1>, <&ccu CLK_DRAM_TVE0>,
+				 <&ccu CLK_DRAM_DE_FE0>, <&ccu CLK_DRAM_DE_BE0>;
+			status = "disabled";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&ccu CLK_CPU>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points =
+				/* kHz	  uV */
+				<1008000 1400000>,
+				<912000	1350000>,
+				<864000	1300000>,
+				<624000	1250000>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu-alert0 {
+					/* milliCelsius */
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu-crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: clk-24M {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk-32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+	};
+
+	de: display-engine {
+		compatible = "allwinner,sun4i-a10-display-engine";
+		allwinner,pipelines = <&fe0>, <&fe1>;
+		status = "disabled";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+		default-pool {
+			compatible = "shared-dma-pool";
+			size = <0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		system-control@1c00000 {
+			compatible = "allwinner,sun4i-a10-system-control";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@10000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+
+			sram_c: sram@1d00000 {
+				compatible = "mmio-sram";
+				reg = <0x01d00000 0xd0000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01d00000 0xd0000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun4i-a10-sram-c1";
+					reg = <0x000000 0x80000>;
+				};
+			};
+		};
+
+		dma: dma-controller@1c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ccu CLK_AHB_DMA>;
+			#dma-cells = <2>;
+		};
+
+		nfc: nand-controller@1c03000 {
+			compatible = "allwinner,sun4i-a10-nand";
+			reg = <0x01c03000 0x1000>;
+			interrupts = <37>;
+			clocks = <&ccu CLK_AHB_NAND>, <&ccu CLK_NAND>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 3>;
+			dma-names = "rxtx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@1c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ccu CLK_AHB_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@1c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ccu CLK_AHB_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_pins>, <&spi1_cs0_pin>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac: ethernet@1c0b000 {
+			compatible = "allwinner,sun4i-a10-emac";
+			reg = <0x01c0b000 0x1000>;
+			interrupts = <55>;
+			clocks = <&ccu CLK_AHB_EMAC>;
+			allwinner,sram = <&emac_sram 1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&emac_pins>;
+			status = "disabled";
+		};
+
+		mdio: mdio@1c0b080 {
+			compatible = "allwinner,sun4i-a10-mdio";
+			reg = <0x01c0b080 0x14>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		tcon0: lcd-controller@1c0c000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0c000 0x1000>;
+			interrupts = <44>;
+			resets = <&ccu RST_TCON0>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD0>,
+				 <&ccu CLK_TCON0_CH0>,
+				 <&ccu CLK_TCON0_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon0-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 14>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon0_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon0>;
+					};
+
+					tcon0_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon0>;
+					};
+				};
+
+				tcon0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon0_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon0>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		tcon1: lcd-controller@1c0d000 {
+			compatible = "allwinner,sun4i-a10-tcon";
+			reg = <0x01c0d000 0x1000>;
+			interrupts = <45>;
+			resets = <&ccu RST_TCON1>;
+			reset-names = "lcd";
+			clocks = <&ccu CLK_AHB_LCD1>,
+				 <&ccu CLK_TCON1_CH0>,
+				 <&ccu CLK_TCON1_CH1>;
+			clock-names = "ahb",
+				      "tcon-ch0",
+				      "tcon-ch1";
+			clock-output-names = "tcon1-pixel-clock";
+			#clock-cells = <0>;
+			dmas = <&dma SUN4I_DMA_DEDICATED 15>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				tcon1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					tcon1_in_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_out_tcon1>;
+					};
+
+					tcon1_in_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_out_tcon1>;
+					};
+				};
+
+				tcon1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					tcon1_out_hdmi: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in_tcon1>;
+						allwinner,tcon-channel = <1>;
+					};
+				};
+			};
+		};
+
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun4i-a10-video-engine";
+			reg = <0x01c0e000 0x1000>;
+			clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_DRAM_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_VE>;
+			interrupts = <53>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+		mmc0: mmc@1c0f000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			interrupts = <32>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@1c10000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@1c11000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc3: mmc@1c12000 {
+			compatible = "allwinner,sun4i-a10-mmc";
+			reg = <0x01c12000 0x1000>;
+			clocks = <&ccu CLK_AHB_MMC3>, <&ccu CLK_MMC3>;
+			clock-names = "ahb", "mmc";
+			interrupts = <35>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usb_otg: usb@1c13000 {
+			compatible = "allwinner,sun4i-a10-musb";
+			reg = <0x01c13000 0x0400>;
+			clocks = <&ccu CLK_AHB_OTG>;
+			interrupts = <38>;
+			interrupt-names = "mc";
+			phys = <&usbphy 0>;
+			phy-names = "usb";
+			extcon = <&usbphy 0>;
+			allwinner,sram = <&otg_sram 1>;
+			dr_mode = "otg";
+			status = "disabled";
+		};
+
+		usbphy: phy@1c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun4i-a10-usb-phy";
+			reg = <0x01c13400 0x10>, <0x01c14800 0x4>, <0x01c1c800 0x4>;
+			reg-names = "phy_ctrl", "pmu1", "pmu2";
+			clocks = <&ccu CLK_USB_PHY>;
+			clock-names = "usb_phy";
+			resets = <&ccu RST_USB_PHY0>,
+				 <&ccu RST_USB_PHY1>,
+				 <&ccu RST_USB_PHY2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@1c14000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ccu CLK_AHB_EHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@1c14400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <64>;
+			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		crypto: crypto-engine@1c15000 {
+			compatible = "allwinner,sun4i-a10-crypto";
+			reg = <0x01c15000 0x1000>;
+			interrupts = <86>;
+			clocks = <&ccu CLK_AHB_SS>, <&ccu CLK_SS>;
+			clock-names = "ahb", "mod";
+		};
+
+		hdmi: hdmi@1c16000 {
+			compatible = "allwinner,sun4i-a10-hdmi";
+			reg = <0x01c16000 0x1000>;
+			interrupts = <58>;
+			clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
+				 <&ccu CLK_PLL_VIDEO0_2X>,
+				 <&ccu CLK_PLL_VIDEO1_2X>;
+			clock-names = "ahb", "mod", "pll-0", "pll-1";
+			dmas = <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_NORMAL 16>,
+			       <&dma SUN4I_DMA_DEDICATED 24>;
+			dma-names = "ddc-tx", "ddc-rx", "audio-tx";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				hdmi_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					hdmi_in_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_out_hdmi>;
+					};
+
+					hdmi_in_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_out_hdmi>;
+					};
+				};
+
+				hdmi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		spi2: spi@1c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ccu CLK_AHB_SPI2>, <&ccu CLK_SPI2>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ahci: sata@1c18000 {
+			compatible = "allwinner,sun4i-a10-ahci";
+			reg = <0x01c18000 0x1000>;
+			interrupts = <56>;
+			clocks = <&ccu CLK_AHB_SATA>, <&ccu CLK_SATA>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1c1c000 {
+			compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+			reg = <0x01c1c000 0x100>;
+			interrupts = <40>;
+			clocks = <&ccu CLK_AHB_EHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci1: usb@1c1c400 {
+			compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+			reg = <0x01c1c400 0x100>;
+			interrupts = <65>;
+			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
+			phys = <&usbphy 2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		csi1: csi@1c1d000 {
+			compatible = "allwinner,sun4i-a10-csi1";
+			reg = <0x01c1d000 0x1000>;
+			interrupts = <43>;
+			clocks = <&ccu CLK_AHB_CSI1>, <&ccu CLK_DRAM_CSI1>;
+			clock-names = "bus", "ram";
+			resets = <&ccu RST_CSI1>;
+			status = "disabled";
+		};
+
+		spi3: spi@1c1f000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c1f000 0x1000>;
+			interrupts = <50>;
+			clocks = <&ccu CLK_AHB_SPI3>, <&ccu CLK_SPI3>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+			       <&dma SUN4I_DMA_DEDICATED 30>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ccu: clock@1c20000 {
+			compatible = "allwinner,sun4i-a10-ccu";
+			reg = <0x01c20000 0x400>;
+			clocks = <&osc24M>, <&osc32k>;
+			clock-names = "hosc", "losc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		intc: interrupt-controller@1c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@1c20800 {
+			compatible = "allwinner,sun4i-a10-pinctrl";
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#gpio-cells = <3>;
+
+			can0_ph_pins: can0-ph-pins {
+				pins = "PH20", "PH21";
+				function = "can";
+			};
+
+			/omit-if-no-ref/
+			csi1_8bits_pg_pins: csi1-8bits-pg-pins {
+				pins = "PG0", "PG2", "PG3", "PG4", "PG5",
+				       "PG6", "PG7", "PG8", "PG9", "PG10",
+				       "PG11";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_24bits_ph_pins: csi1-24bits-ph-pins {
+				pins = "PH0", "PH1", "PH2", "PH3", "PH4",
+				       "PH5", "PH6", "PH7", "PH8", "PH9",
+				       "PH10", "PH11", "PH12", "PH13", "PH14",
+				       "PH15", "PH16", "PH17", "PH18", "PH19",
+				       "PH20", "PH21", "PH22", "PH23", "PH24",
+				       "PH25", "PH26", "PH27";
+				function = "csi1";
+			};
+
+			/omit-if-no-ref/
+			csi1_clk_pg_pin: csi1-clk-pg-pin {
+				pins = "PG1";
+				function = "csi1";
+			};
+
+			emac_pins: emac0-pins {
+				pins = "PA0", "PA1", "PA2",
+				       "PA3", "PA4", "PA5", "PA6",
+				       "PA7", "PA8", "PA9", "PA10",
+				       "PA11", "PA12", "PA13", "PA14",
+				       "PA15", "PA16";
+				function = "emac";
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PB0", "PB1";
+				function = "i2c0";
+			};
+
+			i2c1_pins: i2c1-pins {
+				pins = "PB18", "PB19";
+				function = "i2c1";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "PB20", "PB21";
+				function = "i2c2";
+			};
+
+			ir0_rx_pins: ir0-rx-pin {
+				pins = "PB4";
+				function = "ir0";
+			};
+
+			ir0_tx_pins: ir0-tx-pin {
+				pins = "PB3";
+				function = "ir0";
+			};
+
+			ir1_rx_pins: ir1-rx-pin {
+				pins = "PB23";
+				function = "ir1";
+			};
+
+			ir1_tx_pins: ir1-tx-pin {
+				pins = "PB22";
+				function = "ir1";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2",
+				       "PF3", "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			ps2_ch0_pins: ps2-ch0-pins {
+				pins = "PI20", "PI21";
+				function = "ps2";
+			};
+
+			ps2_ch1_ph_pins: ps2-ch1-ph-pins {
+				pins = "PH12", "PH13";
+				function = "ps2";
+			};
+
+			pwm0_pin: pwm0-pin {
+				pins = "PB2";
+				function = "pwm";
+			};
+
+			pwm1_pin: pwm1-pin {
+				pins = "PI3";
+				function = "pwm";
+			};
+
+			spdif_tx_pin: spdif-tx-pin {
+				pins = "PB13";
+				function = "spdif";
+				bias-pull-up;
+			};
+
+			spi0_pi_pins: spi0-pi-pins {
+				pins = "PI11", "PI12", "PI13";
+				function = "spi0";
+			};
+
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
+				pins = "PI10";
+				function = "spi0";
+			};
+
+			spi1_pins: spi1-pins {
+				pins = "PI17", "PI18", "PI19";
+				function = "spi1";
+			};
+
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PI16";
+				function = "spi1";
+			};
+
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
+				function = "spi2";
+			};
+
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
+				function = "spi2";
+			};
+
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
+				function = "spi2";
+			};
+
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
+				function = "spi2";
+			};
+
+			uart0_pb_pins: uart0-pb-pins {
+				pins = "PB22", "PB23";
+				function = "uart0";
+			};
+
+			uart0_pf_pins: uart0-pf-pins {
+				pins = "PF2", "PF4";
+				function = "uart0";
+			};
+
+			uart1_pins: uart1-pins {
+				pins = "PA10", "PA11";
+				function = "uart1";
+			};
+		};
+
+		timer@1c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>,
+				     <23>,
+				     <24>,
+				     <25>,
+				     <67>,
+				     <68>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@1c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+			interrupts = <24>;
+			clocks = <&osc24M>;
+		};
+
+		rtc: rtc@1c20d00 {
+			compatible = "allwinner,sun4i-a10-rtc";
+			reg = <0x01c20d00 0x20>;
+			interrupts = <24>;
+		};
+
+		pwm: pwm@1c20e00 {
+			compatible = "allwinner,sun4i-a10-pwm";
+			reg = <0x01c20e00 0xc>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		spdif: spdif@1c21000 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-spdif";
+			reg = <0x01c21000 0x400>;
+			interrupts = <13>;
+			clocks = <&ccu CLK_APB0_SPDIF>, <&ccu CLK_SPDIF>;
+			clock-names = "apb", "spdif";
+			dmas = <&dma SUN4I_DMA_NORMAL 2>,
+			       <&dma SUN4I_DMA_NORMAL 2>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		ir0: ir@1c21800 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR0>, <&ccu CLK_IR0>;
+			clock-names = "apb", "ir";
+			interrupts = <5>;
+			reg = <0x01c21800 0x40>;
+			status = "disabled";
+		};
+
+		ir1: ir@1c21c00 {
+			compatible = "allwinner,sun4i-a10-ir";
+			clocks = <&ccu CLK_APB0_IR1>, <&ccu CLK_IR1>;
+			clock-names = "apb", "ir";
+			interrupts = <6>;
+			reg = <0x01c21c00 0x40>;
+			status = "disabled";
+		};
+
+		i2s0: i2s@1c22400 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-i2s";
+			reg = <0x01c22400 0x400>;
+			interrupts = <16>;
+			clocks = <&ccu CLK_APB0_I2S0>, <&ccu CLK_I2S0>;
+			clock-names = "apb", "mod";
+			dmas = <&dma SUN4I_DMA_NORMAL 3>,
+			       <&dma SUN4I_DMA_NORMAL 3>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		lradc: lradc@1c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		codec: codec@1c22c00 {
+			#sound-dai-cells = <0>;
+			compatible = "allwinner,sun4i-a10-codec";
+			reg = <0x01c22c00 0x40>;
+			interrupts = <30>;
+			clocks = <&ccu CLK_APB0_CODEC>, <&ccu CLK_CODEC>;
+			clock-names = "apb", "codec";
+			dmas = <&dma SUN4I_DMA_NORMAL 19>,
+			       <&dma SUN4I_DMA_NORMAL 19>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		sid: eeprom@1c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@1c25000 {
+			compatible = "allwinner,sun4i-a10-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart0: serial@1c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <1>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@1c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@1c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <3>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@1c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@1c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <17>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@1c29400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29400 0x400>;
+			interrupts = <18>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART5>;
+			status = "disabled";
+		};
+
+		uart6: serial@1c29800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29800 0x400>;
+			interrupts = <19>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART6>;
+			status = "disabled";
+		};
+
+		uart7: serial@1c29c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29c00 0x400>;
+			interrupts = <20>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_APB1_UART7>;
+			status = "disabled";
+		};
+
+		ps20: ps2@1c2a000 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a000 0x400>;
+			interrupts = <62>;
+			clocks = <&ccu CLK_APB1_PS20>;
+			status = "disabled";
+		};
+
+		ps21: ps2@1c2a400 {
+			compatible = "allwinner,sun4i-a10-ps2";
+			reg = <0x01c2a400 0x400>;
+			interrupts = <63>;
+			clocks = <&ccu CLK_APB1_PS21>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@1c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_APB1_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@1c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_APB1_I2C1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@1c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_APB1_I2C2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		can0: can@1c2bc00 {
+			compatible = "allwinner,sun4i-a10-can";
+			reg = <0x01c2bc00 0x400>;
+			interrupts = <26>;
+			clocks = <&ccu CLK_APB1_CAN>;
+			status = "disabled";
+		};
+
+		mali: gpu@1c40000 {
+			compatible = "allwinner,sun4i-a10-mali", "arm,mali-400";
+			reg = <0x01c40000 0x10000>;
+			interrupts = <69>,
+				     <70>,
+				     <71>,
+				     <72>,
+				     <73>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pmu";
+			clocks = <&ccu CLK_AHB_GPU>, <&ccu CLK_GPU>;
+			clock-names = "bus", "core";
+			resets = <&ccu RST_GPU>;
+
+			assigned-clocks = <&ccu CLK_GPU>;
+			assigned-clock-rates = <384000000>;
+		};
+
+		fe0: display-frontend@1e00000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e00000 0x20000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
+				 <&ccu CLK_DRAM_DE_FE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe0_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe0>;
+					};
+
+					fe0_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe0>;
+					};
+				};
+			};
+		};
+
+		fe1: display-frontend@1e20000 {
+			compatible = "allwinner,sun4i-a10-display-frontend";
+			reg = <0x01e20000 0x20000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
+				 <&ccu CLK_DRAM_DE_FE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_FE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				fe1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					fe1_out_be0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&be0_in_fe1>;
+					};
+
+					fe1_out_be1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&be1_in_fe1>;
+					};
+				};
+			};
+		};
+
+		be1: display-backend@1e40000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e40000 0x10000>;
+			interrupts = <48>;
+			clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
+				 <&ccu CLK_DRAM_DE_BE1>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be1_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be1_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be1>;
+					};
+
+					be1_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be1>;
+					};
+				};
+
+				be1_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be1_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be1>;
+					};
+
+					be1_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be1>;
+					};
+				};
+			};
+		};
+
+		be0: display-backend@1e60000 {
+			compatible = "allwinner,sun4i-a10-display-backend";
+			reg = <0x01e60000 0x10000>;
+			interrupts = <47>;
+			clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
+				 <&ccu CLK_DRAM_DE_BE0>;
+			clock-names = "ahb", "mod",
+				      "ram";
+			resets = <&ccu RST_DE_BE0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				be0_in: port@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					be0_in_fe0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&fe0_out_be0>;
+					};
+
+					be0_in_fe1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&fe1_out_be0>;
+					};
+				};
+
+				be0_out: port@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+
+					be0_out_tcon0: endpoint@0 {
+						reg = <0>;
+						remote-endpoint = <&tcon0_in_be0>;
+					};
+
+					be0_out_tcon1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&tcon1_in_be0>;
+					};
+				};
+			};
+		};
+	};
+};