Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 1290 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
new file mode 100644
index 000000000..7b2969656
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -0,0 +1,1290 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "ASUS EeePad Transformer TF101";
+	compatible = "asus,tf101", "nvidia,tegra20";
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf_crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive_csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+
+			mount-matrix = "-1",  "0",  "0",
+					"0",  "1",  "0",
+					"0",  "0", "-1";
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0x00000400 /* Mic bias current detect */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5b {
+			compatible = "atmel,maxtouch";
+			reg = <0x5b>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+
+					mount-matrix =	 "1",  "0",  "0",
+							 "0",  "1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		switch-dock-hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};