Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 509 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
new file mode 100644
index 000000000..c5e92f6d2
--- /dev/null
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ARM Ltd. Versatile Express
+ *
+ * Motherboard Express uATX
+ * V2M-P1
+ *
+ * HBI-0190D
+ *
+ * Original memory map ("Legacy memory map" in the board's
+ * Technical Reference Manual)
+ *
+ * WARNING! The hardware described in this file is independent from the
+ * RS1 variant (vexpress-v2m-rs1.dtsi), but there is a strong
+ * correspondence between the two configurations.
+ *
+ * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
+ * CHANGES TO vexpress-v2m-rs1.dtsi!
+ */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
+			arm,hbi = <0x190>;
+			arm,vexpress,site = <0>;
+			compatible = "arm,vexpress,v2m-p1", "simple-bus";
+			#address-cells = <2>; /* SMB chipselect number and offset */
+			#size-cells = <1>;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
+
+			flash@0,00000000 {
+				compatible = "arm,vexpress-flash", "cfi-flash";
+				reg = <0 0x00000000 0x04000000>,
+				      <1 0x00000000 0x04000000>;
+				bank-width = <4>;
+				partitions {
+					compatible = "arm,arm-firmware-suite";
+				};
+			};
+
+			psram@2,00000000 {
+				compatible = "arm,vexpress-psram", "mtd-ram";
+				reg = <2 0x00000000 0x02000000>;
+				bank-width = <4>;
+			};
+
+			ethernet@3,02000000 {
+				compatible = "smsc,lan9118", "smsc,lan9115";
+				reg = <3 0x02000000 0x10000>;
+				interrupts = <15>;
+				phy-mode = "mii";
+				reg-io-width = <4>;
+				smsc,irq-active-high;
+				smsc,irq-push-pull;
+				vdd33a-supply = <&v2m_fixed_3v3>;
+				vddvario-supply = <&v2m_fixed_3v3>;
+			};
+
+			usb@3,03000000 {
+				compatible = "nxp,usb-isp1761";
+				reg = <3 0x03000000 0x20000>;
+				interrupts = <16>;
+				dr_mode = "peripheral";
+			};
+
+			iofpga@7,00000000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 7 0 0x20000>;
+
+				v2m_sysreg: sysreg@0 {
+					compatible = "arm,vexpress-sysreg";
+					reg = <0x00000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x1000>;
+
+					v2m_led_gpios: gpio@8 {
+						compatible = "arm,vexpress-sysreg,sys_led";
+						reg = <0x008 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_mmc_gpios: gpio@48 {
+						compatible = "arm,vexpress-sysreg,sys_mci";
+						reg = <0x048 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+
+					v2m_flash_gpios: gpio@4c {
+						compatible = "arm,vexpress-sysreg,sys_flash";
+						reg = <0x04c 4>;
+						gpio-controller;
+						#gpio-cells = <2>;
+					};
+				};
+
+				v2m_sysctl: sysctl@1000 {
+					compatible = "arm,sp810", "arm,primecell";
+					reg = <0x01000 0x1000>;
+					clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
+					clock-names = "refclk", "timclk", "apb_pclk";
+					#clock-cells = <1>;
+					clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+					assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
+					assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
+				};
+
+				/* PCI-E I2C bus */
+				v2m_i2c_pcie: i2c@2000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x02000 0x1000>;
+
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pcie-switch@60 {
+						compatible = "idt,89hpes32h8";
+						reg = <0x60>;
+					};
+				};
+
+				aaci@4000 {
+					compatible = "arm,pl041", "arm,primecell";
+					reg = <0x04000 0x1000>;
+					interrupts = <11>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				mmci@5000 {
+					compatible = "arm,pl180", "arm,primecell";
+					reg = <0x05000 0x1000>;
+					interrupts = <9>, <10>;
+					cd-gpios = <&v2m_mmc_gpios 0 0>;
+					wp-gpios = <&v2m_mmc_gpios 1 0>;
+					max-frequency = <12000000>;
+					vmmc-supply = <&v2m_fixed_3v3>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "mclk", "apb_pclk";
+				};
+
+				kmi@6000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x06000 0x1000>;
+					interrupts = <12>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				kmi@7000 {
+					compatible = "arm,pl050", "arm,primecell";
+					reg = <0x07000 0x1000>;
+					interrupts = <13>;
+					clocks = <&v2m_clk24mhz>, <&smbclk>;
+					clock-names = "KMIREFCLK", "apb_pclk";
+				};
+
+				v2m_serial0: serial@9000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x09000 0x1000>;
+					interrupts = <5>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial1: serial@a000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0a000 0x1000>;
+					interrupts = <6>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial2: serial@b000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0b000 0x1000>;
+					interrupts = <7>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				v2m_serial3: serial@c000 {
+					compatible = "arm,pl011", "arm,primecell";
+					reg = <0x0c000 0x1000>;
+					interrupts = <8>;
+					clocks = <&v2m_oscclk2>, <&smbclk>;
+					clock-names = "uartclk", "apb_pclk";
+				};
+
+				wdt@f000 {
+					compatible = "arm,sp805", "arm,primecell";
+					reg = <0x0f000 0x1000>;
+					interrupts = <0>;
+					clocks = <&v2m_refclk32khz>, <&smbclk>;
+					clock-names = "wdog_clk", "apb_pclk";
+				};
+
+				v2m_timer01: timer@11000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x11000 0x1000>;
+					interrupts = <2>;
+					clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				v2m_timer23: timer@12000 {
+					compatible = "arm,sp804", "arm,primecell";
+					reg = <0x12000 0x1000>;
+					interrupts = <3>;
+					clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
+					clock-names = "timclken1", "timclken2", "apb_pclk";
+				};
+
+				/* DVI I2C bus */
+				v2m_i2c_dvi: i2c@16000 {
+					compatible = "arm,versatile-i2c";
+					reg = <0x16000 0x1000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dvi-transmitter@39 {
+						compatible = "sil,sii9022-tpi", "sil,sii9022";
+						reg = <0x39>;
+
+						ports {
+							#address-cells = <1>;
+							#size-cells = <0>;
+
+							/*
+							 * Both the core tile and the motherboard routes their output
+							 * pads to this transmitter. The motherboard system controller
+							 * can select one of them as input using a mux register in
+							 * "arm,vexpress-muxfpga". The Vexpress with the CA9 core tile is
+							 * the only platform with this specific set-up.
+							 */
+							port@0 {
+								reg = <0>;
+								dvi_bridge_in_ct: endpoint {
+									remote-endpoint = <&clcd_pads_ct>;
+								};
+							};
+							port@1 {
+								reg = <1>;
+								dvi_bridge_in_mb: endpoint {
+									remote-endpoint = <&clcd_pads_mb>;
+								};
+							};
+						};
+					};
+
+					dvi-transmitter@60 {
+						compatible = "sil,sii9022-cpi", "sil,sii9022";
+						reg = <0x60>;
+					};
+				};
+
+				rtc@17000 {
+					compatible = "arm,pl031", "arm,primecell";
+					reg = <0x17000 0x1000>;
+					interrupts = <4>;
+					clocks = <&smbclk>;
+					clock-names = "apb_pclk";
+				};
+
+				compact-flash@1a000 {
+					compatible = "arm,vexpress-cf", "ata-generic";
+					reg = <0x1a000 0x100
+					       0x1a100 0xf00>;
+					reg-shift = <2>;
+				};
+
+
+				clcd@1f000 {
+					compatible = "arm,pl111", "arm,primecell";
+					reg = <0x1f000 0x1000>;
+					interrupt-names = "combined";
+					interrupts = <14>;
+					clocks = <&v2m_oscclk1>, <&smbclk>;
+					clock-names = "clcdclk", "apb_pclk";
+					/* 800x600 16bpp @36MHz works fine */
+					max-memory-bandwidth = <54000000>;
+					memory-region = <&vram>;
+
+					port {
+						clcd_pads_mb: endpoint {
+							remote-endpoint = <&dvi_bridge_in_mb>;
+							arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+						};
+					};
+				};
+			};
+
+			v2m_fixed_3v3: fixed-regulator-0 {
+				compatible = "regulator-fixed";
+				regulator-name = "3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v2m_clk24mhz: clk24mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <24000000>;
+				clock-output-names = "v2m:clk24mhz";
+			};
+
+			v2m_refclk1mhz: refclk1mhz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <1000000>;
+				clock-output-names = "v2m:refclk1mhz";
+			};
+
+			v2m_refclk32khz: refclk32khz {
+				compatible = "fixed-clock";
+				#clock-cells = <0>;
+				clock-frequency = <32768>;
+				clock-output-names = "v2m:refclk32khz";
+			};
+
+			leds {
+				compatible = "gpio-leds";
+
+				led-user1 {
+					label = "v2m:green:user1";
+					gpios = <&v2m_led_gpios 0 0>;
+					linux,default-trigger = "heartbeat";
+				};
+
+				led-user2 {
+					label = "v2m:green:user2";
+					gpios = <&v2m_led_gpios 1 0>;
+					linux,default-trigger = "mmc0";
+				};
+
+				led-user3 {
+					label = "v2m:green:user3";
+					gpios = <&v2m_led_gpios 2 0>;
+					linux,default-trigger = "cpu0";
+				};
+
+				led-user4 {
+					label = "v2m:green:user4";
+					gpios = <&v2m_led_gpios 3 0>;
+					linux,default-trigger = "cpu1";
+				};
+
+				led-user5 {
+					label = "v2m:green:user5";
+					gpios = <&v2m_led_gpios 4 0>;
+					linux,default-trigger = "cpu2";
+				};
+
+				led-user6 {
+					label = "v2m:green:user6";
+					gpios = <&v2m_led_gpios 5 0>;
+					linux,default-trigger = "cpu3";
+				};
+
+				led-user7 {
+					label = "v2m:green:user7";
+					gpios = <&v2m_led_gpios 6 0>;
+					linux,default-trigger = "cpu4";
+				};
+
+				led-user8 {
+					label = "v2m:green:user8";
+					gpios = <&v2m_led_gpios 7 0>;
+					linux,default-trigger = "cpu5";
+				};
+			};
+
+			mcc {
+				compatible = "arm,vexpress,config-bus";
+				arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+				oscclk0 {
+					/* MCC static memory clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 0>;
+					freq-range = <25000000 60000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk0";
+				};
+
+				v2m_oscclk1: oscclk1 {
+					/* CLCD clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 1>;
+					freq-range = <23750000 65000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk1";
+				};
+
+				v2m_oscclk2: oscclk2 {
+					/* IO FPGA peripheral clock */
+					compatible = "arm,vexpress-osc";
+					arm,vexpress-sysreg,func = <1 2>;
+					freq-range = <24000000 24000000>;
+					#clock-cells = <0>;
+					clock-output-names = "v2m:oscclk2";
+				};
+
+				volt-vio {
+					/* Logic level voltage */
+					compatible = "arm,vexpress-volt";
+					arm,vexpress-sysreg,func = <2 0>;
+					regulator-name = "VIO";
+					regulator-always-on;
+					label = "VIO";
+				};
+
+				temp-mcc {
+					/* MCC internal operating temperature */
+					compatible = "arm,vexpress-temp";
+					arm,vexpress-sysreg,func = <4 0>;
+					label = "MCC";
+				};
+
+				reset {
+					compatible = "arm,vexpress-reset";
+					arm,vexpress-sysreg,func = <5 0>;
+				};
+
+				muxfpga {
+					compatible = "arm,vexpress-muxfpga";
+					arm,vexpress-sysreg,func = <7 0>;
+				};
+
+				shutdown {
+					compatible = "arm,vexpress-shutdown";
+					arm,vexpress-sysreg,func = <8 0>;
+				};
+
+				reboot {
+					compatible = "arm,vexpress-reboot";
+					arm,vexpress-sysreg,func = <9 0>;
+				};
+
+				dvimode {
+					compatible = "arm,vexpress-dvimode";
+					arm,vexpress-sysreg,func = <11 0>;
+				};
+			};
+		};
+	};
+};