Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 443 insertions, 0 deletions

diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S
new file mode 100644
index 000000000..083fe1ab9
--- /dev/null
+++ b/arch/arm/crypto/chacha-scalar-core.S
@@ -0,0 +1,443 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Google, Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Design notes:
+ *
+ * 16 registers would be needed to hold the state matrix, but only 14 are
+ * available because 'sp' and 'pc' cannot be used.  So we spill the elements
+ * (x8, x9) to the stack and swap them out with (x10, x11).  This adds one
+ * 'ldrd' and one 'strd' instruction per round.
+ *
+ * All rotates are performed using the implicit rotate operand accepted by the
+ * 'add' and 'eor' instructions.  This is faster than using explicit rotate
+ * instructions.  To make this work, we allow the values in the second and last
+ * rows of the ChaCha state matrix (rows 'b' and 'd') to temporarily have the
+ * wrong rotation amount.  The rotation amount is then fixed up just in time
+ * when the values are used.  'brot' is the number of bits the values in row 'b'
+ * need to be rotated right to arrive at the correct values, and 'drot'
+ * similarly for row 'd'.  (brot, drot) start out as (0, 0) but we make it such
+ * that they end up as (25, 24) after every round.
+ */
+
+	// ChaCha state registers
+	X0	.req	r0
+	X1	.req	r1
+	X2	.req	r2
+	X3	.req	r3
+	X4	.req	r4
+	X5	.req	r5
+	X6	.req	r6
+	X7	.req	r7
+	X8_X10	.req	r8	// shared by x8 and x10
+	X9_X11	.req	r9	// shared by x9 and x11
+	X12	.req	r10
+	X13	.req	r11
+	X14	.req	r12
+	X15	.req	r14
+
+.macro _le32_bswap_4x	a, b, c, d,  tmp
+#ifdef __ARMEB__
+	rev_l		\a,  \tmp
+	rev_l		\b,  \tmp
+	rev_l		\c,  \tmp
+	rev_l		\d,  \tmp
+#endif
+.endm
+
+.macro __ldrd		a, b, src, offset
+#if __LINUX_ARM_ARCH__ >= 6
+	ldrd		\a, \b, [\src, #\offset]
+#else
+	ldr		\a, [\src, #\offset]
+	ldr		\b, [\src, #\offset + 4]
+#endif
+.endm
+
+.macro __strd		a, b, dst, offset
+#if __LINUX_ARM_ARCH__ >= 6
+	strd		\a, \b, [\dst, #\offset]
+#else
+	str		\a, [\dst, #\offset]
+	str		\b, [\dst, #\offset + 4]
+#endif
+.endm
+
+.macro _halfround	a1, b1, c1, d1,  a2, b2, c2, d2
+
+	// a += b; d ^= a; d = rol(d, 16);
+	add		\a1, \a1, \b1, ror #brot
+	add		\a2, \a2, \b2, ror #brot
+	eor		\d1, \a1, \d1, ror #drot
+	eor		\d2, \a2, \d2, ror #drot
+	// drot == 32 - 16 == 16
+
+	// c += d; b ^= c; b = rol(b, 12);
+	add		\c1, \c1, \d1, ror #16
+	add		\c2, \c2, \d2, ror #16
+	eor		\b1, \c1, \b1, ror #brot
+	eor		\b2, \c2, \b2, ror #brot
+	// brot == 32 - 12 == 20
+
+	// a += b; d ^= a; d = rol(d, 8);
+	add		\a1, \a1, \b1, ror #20
+	add		\a2, \a2, \b2, ror #20
+	eor		\d1, \a1, \d1, ror #16
+	eor		\d2, \a2, \d2, ror #16
+	// drot == 32 - 8 == 24
+
+	// c += d; b ^= c; b = rol(b, 7);
+	add		\c1, \c1, \d1, ror #24
+	add		\c2, \c2, \d2, ror #24
+	eor		\b1, \c1, \b1, ror #20
+	eor		\b2, \c2, \b2, ror #20
+	// brot == 32 - 7 == 25
+.endm
+
+.macro _doubleround
+
+	// column round
+
+	// quarterrounds: (x0, x4, x8, x12) and (x1, x5, x9, x13)
+	_halfround	X0, X4, X8_X10, X12,  X1, X5, X9_X11, X13
+
+	// save (x8, x9); restore (x10, x11)
+	__strd		X8_X10, X9_X11, sp, 0
+	__ldrd		X8_X10, X9_X11, sp, 8
+
+	// quarterrounds: (x2, x6, x10, x14) and (x3, x7, x11, x15)
+	_halfround	X2, X6, X8_X10, X14,  X3, X7, X9_X11, X15
+
+	.set brot, 25
+	.set drot, 24
+
+	// diagonal round
+
+	// quarterrounds: (x0, x5, x10, x15) and (x1, x6, x11, x12)
+	_halfround	X0, X5, X8_X10, X15,  X1, X6, X9_X11, X12
+
+	// save (x10, x11); restore (x8, x9)
+	__strd		X8_X10, X9_X11, sp, 8
+	__ldrd		X8_X10, X9_X11, sp, 0
+
+	// quarterrounds: (x2, x7, x8, x13) and (x3, x4, x9, x14)
+	_halfround	X2, X7, X8_X10, X13,  X3, X4, X9_X11, X14
+.endm
+
+.macro _chacha_permute	nrounds
+	.set brot, 0
+	.set drot, 0
+	.rept \nrounds / 2
+	 _doubleround
+	.endr
+.endm
+
+.macro _chacha		nrounds
+
+.Lnext_block\@:
+	// Stack: unused0-unused1 x10-x11 x0-x15 OUT IN LEN
+	// Registers contain x0-x9,x12-x15.
+
+	// Do the core ChaCha permutation to update x0-x15.
+	_chacha_permute	\nrounds
+
+	add		sp, #8
+	// Stack: x10-x11 orig_x0-orig_x15 OUT IN LEN
+	// Registers contain x0-x9,x12-x15.
+	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
+
+	// Free up some registers (r8-r12,r14) by pushing (x8-x9,x12-x15).
+	push		{X8_X10, X9_X11, X12, X13, X14, X15}
+
+	// Load (OUT, IN, LEN).
+	ldr		r14, [sp, #96]
+	ldr		r12, [sp, #100]
+	ldr		r11, [sp, #104]
+
+	orr		r10, r14, r12
+
+	// Use slow path if fewer than 64 bytes remain.
+	cmp		r11, #64
+	blt		.Lxor_slowpath\@
+
+	// Use slow path if IN and/or OUT isn't 4-byte aligned.  Needed even on
+	// ARMv6+, since ldmia and stmia (used below) still require alignment.
+	tst		r10, #3
+	bne		.Lxor_slowpath\@
+
+	// Fast path: XOR 64 bytes of aligned data.
+
+	// Stack: x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
+	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is OUT.
+	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
+
+	// x0-x3
+	__ldrd		r8, r9, sp, 32
+	__ldrd		r10, r11, sp, 40
+	add		X0, X0, r8
+	add		X1, X1, r9
+	add		X2, X2, r10
+	add		X3, X3, r11
+	_le32_bswap_4x	X0, X1, X2, X3,  r8
+	ldmia		r12!, {r8-r11}
+	eor		X0, X0, r8
+	eor		X1, X1, r9
+	eor		X2, X2, r10
+	eor		X3, X3, r11
+	stmia		r14!, {X0-X3}
+
+	// x4-x7
+	__ldrd		r8, r9, sp, 48
+	__ldrd		r10, r11, sp, 56
+	add		X4, r8, X4, ror #brot
+	add		X5, r9, X5, ror #brot
+	ldmia		r12!, {X0-X3}
+	add		X6, r10, X6, ror #brot
+	add		X7, r11, X7, ror #brot
+	_le32_bswap_4x	X4, X5, X6, X7,  r8
+	eor		X4, X4, X0
+	eor		X5, X5, X1
+	eor		X6, X6, X2
+	eor		X7, X7, X3
+	stmia		r14!, {X4-X7}
+
+	// x8-x15
+	pop		{r0-r7}			// (x8-x9,x12-x15,x10-x11)
+	__ldrd		r8, r9, sp, 32
+	__ldrd		r10, r11, sp, 40
+	add		r0, r0, r8		// x8
+	add		r1, r1, r9		// x9
+	add		r6, r6, r10		// x10
+	add		r7, r7, r11		// x11
+	_le32_bswap_4x	r0, r1, r6, r7,  r8
+	ldmia		r12!, {r8-r11}
+	eor		r0, r0, r8		// x8
+	eor		r1, r1, r9		// x9
+	eor		r6, r6, r10		// x10
+	eor		r7, r7, r11		// x11
+	stmia		r14!, {r0,r1,r6,r7}
+	ldmia		r12!, {r0,r1,r6,r7}
+	__ldrd		r8, r9, sp, 48
+	__ldrd		r10, r11, sp, 56
+	add		r2, r8, r2, ror #drot	// x12
+	add		r3, r9, r3, ror #drot	// x13
+	add		r4, r10, r4, ror #drot	// x14
+	add		r5, r11, r5, ror #drot	// x15
+	_le32_bswap_4x	r2, r3, r4, r5,  r9
+	  ldr		r9, [sp, #72]		// load LEN
+	eor		r2, r2, r0		// x12
+	eor		r3, r3, r1		// x13
+	eor		r4, r4, r6		// x14
+	eor		r5, r5, r7		// x15
+	  subs		r9, #64			// decrement and check LEN
+	stmia		r14!, {r2-r5}
+
+	beq		.Ldone\@
+
+.Lprepare_for_next_block\@:
+
+	// Stack: x0-x15 OUT IN LEN
+
+	// Increment block counter (x12)
+	add		r8, #1
+
+	// Store updated (OUT, IN, LEN)
+	str		r14, [sp, #64]
+	str		r12, [sp, #68]
+	str		r9, [sp, #72]
+
+	  mov		r14, sp
+
+	// Store updated block counter (x12)
+	str		r8, [sp, #48]
+
+	  sub		sp, #16
+
+	// Reload state and do next block
+	ldmia		r14!, {r0-r11}		// load x0-x11
+	__strd		r10, r11, sp, 8		// store x10-x11 before state
+	ldmia		r14, {r10-r12,r14}	// load x12-x15
+	b		.Lnext_block\@
+
+.Lxor_slowpath\@:
+	// Slow path: < 64 bytes remaining, or unaligned input or output buffer.
+	// We handle it by storing the 64 bytes of keystream to the stack, then
+	// XOR-ing the needed portion with the data.
+
+	// Allocate keystream buffer
+	sub		sp, #64
+	mov		r14, sp
+
+	// Stack: ks0-ks15 x8-x9 x12-x15 x10-x11 orig_x0-orig_x15 OUT IN LEN
+	// Registers: r0-r7 are x0-x7; r8-r11 are free; r12 is IN; r14 is &ks0.
+	// x4-x7 are rotated by 'brot'; x12-x15 are rotated by 'drot'.
+
+	// Save keystream for x0-x3
+	__ldrd		r8, r9, sp, 96
+	__ldrd		r10, r11, sp, 104
+	add		X0, X0, r8
+	add		X1, X1, r9
+	add		X2, X2, r10
+	add		X3, X3, r11
+	_le32_bswap_4x	X0, X1, X2, X3,  r8
+	stmia		r14!, {X0-X3}
+
+	// Save keystream for x4-x7
+	__ldrd		r8, r9, sp, 112
+	__ldrd		r10, r11, sp, 120
+	add		X4, r8, X4, ror #brot
+	add		X5, r9, X5, ror #brot
+	add		X6, r10, X6, ror #brot
+	add		X7, r11, X7, ror #brot
+	_le32_bswap_4x	X4, X5, X6, X7,  r8
+	  add		r8, sp, #64
+	stmia		r14!, {X4-X7}
+
+	// Save keystream for x8-x15
+	ldm		r8, {r0-r7}		// (x8-x9,x12-x15,x10-x11)
+	__ldrd		r8, r9, sp, 128
+	__ldrd		r10, r11, sp, 136
+	add		r0, r0, r8		// x8
+	add		r1, r1, r9		// x9
+	add		r6, r6, r10		// x10
+	add		r7, r7, r11		// x11
+	_le32_bswap_4x	r0, r1, r6, r7,  r8
+	stmia		r14!, {r0,r1,r6,r7}
+	__ldrd		r8, r9, sp, 144
+	__ldrd		r10, r11, sp, 152
+	add		r2, r8, r2, ror #drot	// x12
+	add		r3, r9, r3, ror #drot	// x13
+	add		r4, r10, r4, ror #drot	// x14
+	add		r5, r11, r5, ror #drot	// x15
+	_le32_bswap_4x	r2, r3, r4, r5,  r9
+	stmia		r14, {r2-r5}
+
+	// Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN
+	// Registers: r8 is block counter, r12 is IN.
+
+	ldr		r9, [sp, #168]		// LEN
+	ldr		r14, [sp, #160]		// OUT
+	cmp		r9, #64
+	  mov		r0, sp
+	movle		r1, r9
+	movgt		r1, #64
+	// r1 is number of bytes to XOR, in range [1, 64]
+
+.if __LINUX_ARM_ARCH__ < 6
+	orr		r2, r12, r14
+	tst		r2, #3			// IN or OUT misaligned?
+	bne		.Lxor_next_byte\@
+.endif
+
+	// XOR a word at a time
+.rept 16
+	subs		r1, #4
+	blt		.Lxor_words_done\@
+	ldr		r2, [r12], #4
+	ldr		r3, [r0], #4
+	eor		r2, r2, r3
+	str		r2, [r14], #4
+.endr
+	b		.Lxor_slowpath_done\@
+.Lxor_words_done\@:
+	ands		r1, r1, #3
+	beq		.Lxor_slowpath_done\@
+
+	// XOR a byte at a time
+.Lxor_next_byte\@:
+	ldrb		r2, [r12], #1
+	ldrb		r3, [r0], #1
+	eor		r2, r2, r3
+	strb		r2, [r14], #1
+	subs		r1, #1
+	bne		.Lxor_next_byte\@
+
+.Lxor_slowpath_done\@:
+	subs		r9, #64
+	add		sp, #96
+	bgt		.Lprepare_for_next_block\@
+
+.Ldone\@:
+.endm	// _chacha
+
+/*
+ * void chacha_doarm(u8 *dst, const u8 *src, unsigned int bytes,
+ *		     const u32 *state, int nrounds);
+ */
+ENTRY(chacha_doarm)
+	cmp		r2, #0			// len == 0?
+	reteq		lr
+
+	ldr		ip, [sp]
+	cmp		ip, #12
+
+	push		{r0-r2,r4-r11,lr}
+
+	// Push state x0-x15 onto stack.
+	// Also store an extra copy of x10-x11 just before the state.
+
+	add		X12, r3, #48
+	ldm		X12, {X12,X13,X14,X15}
+	push		{X12,X13,X14,X15}
+	sub		sp, sp, #64
+
+	__ldrd		X8_X10, X9_X11, r3, 40
+	__strd		X8_X10, X9_X11, sp, 8
+	__strd		X8_X10, X9_X11, sp, 56
+	ldm		r3, {X0-X9_X11}
+	__strd		X0, X1, sp, 16
+	__strd		X2, X3, sp, 24
+	__strd		X4, X5, sp, 32
+	__strd		X6, X7, sp, 40
+	__strd		X8_X10, X9_X11, sp, 48
+
+	beq		1f
+	_chacha		20
+
+0:	add		sp, #76
+	pop		{r4-r11, pc}
+
+1:	_chacha		12
+	b		0b
+ENDPROC(chacha_doarm)
+
+/*
+ * void hchacha_block_arm(const u32 state[16], u32 out[8], int nrounds);
+ */
+ENTRY(hchacha_block_arm)
+	push		{r1,r4-r11,lr}
+
+	cmp		r2, #12			// ChaCha12 ?
+
+	mov		r14, r0
+	ldmia		r14!, {r0-r11}		// load x0-x11
+	push		{r10-r11}		// store x10-x11 to stack
+	ldm		r14, {r10-r12,r14}	// load x12-x15
+	sub		sp, #8
+
+	beq		1f
+	_chacha_permute	20
+
+	// Skip over (unused0-unused1, x10-x11)
+0:	add		sp, #16
+
+	// Fix up rotations of x12-x15
+	ror		X12, X12, #drot
+	ror		X13, X13, #drot
+	  pop		{r4}			// load 'out'
+	ror		X14, X14, #drot
+	ror		X15, X15, #drot
+
+	// Store (x0-x3,x12-x15) to 'out'
+	stm		r4, {X0,X1,X2,X3,X12,X13,X14,X15}
+
+	pop		{r4-r11,pc}
+
+1:	_chacha_permute	12
+	b		0b
+ENDPROC(hchacha_block_arm)