Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 507 insertions, 0 deletions

diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
new file mode 100644
index 000000000..1c8b68514
--- /dev/null
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -0,0 +1,507 @@
+#define __ARM_ARCH__ __LINUX_ARM_ARCH__
+@ SPDX-License-Identifier: GPL-2.0
+
+@ This code is taken from the OpenSSL project but the author (Andy Polyakov)
+@ has relicensed it under the GPLv2. Therefore this program is free software;
+@ you can redistribute it and/or modify it under the terms of the GNU General
+@ Public License version 2 as published by the Free Software Foundation.
+@
+@ The original headers, including the original license headers, are
+@ included below for completeness.
+
+@ ====================================================================
+@ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+@ project. The module is, however, dual licensed under OpenSSL and
+@ CRYPTOGAMS licenses depending on where you obtain it. For further
+@ details see https://www.openssl.org/~appro/cryptogams/.
+@ ====================================================================
+
+@ sha1_block procedure for ARMv4.
+@
+@ January 2007.
+
+@ Size/performance trade-off
+@ ====================================================================
+@ impl		size in bytes	comp cycles[*]	measured performance
+@ ====================================================================
+@ thumb		304		3212		4420
+@ armv4-small	392/+29%	1958/+64%	2250/+96%
+@ armv4-compact	740/+89%	1552/+26%	1840/+22%
+@ armv4-large	1420/+92%	1307/+19%	1370/+34%[***]
+@ full unroll	~5100/+260%	~1260/+4%	~1300/+5%
+@ ====================================================================
+@ thumb		= same as 'small' but in Thumb instructions[**] and
+@		  with recurring code in two private functions;
+@ small		= detached Xload/update, loops are folded;
+@ compact	= detached Xload/update, 5x unroll;
+@ large		= interleaved Xload/update, 5x unroll;
+@ full unroll	= interleaved Xload/update, full unroll, estimated[!];
+@
+@ [*]	Manually counted instructions in "grand" loop body. Measured
+@	performance is affected by prologue and epilogue overhead,
+@	i-cache availability, branch penalties, etc.
+@ [**]	While each Thumb instruction is twice smaller, they are not as
+@	diverse as ARM ones: e.g., there are only two arithmetic
+@	instructions with 3 arguments, no [fixed] rotate, addressing
+@	modes are limited. As result it takes more instructions to do
+@	the same job in Thumb, therefore the code is never twice as
+@	small and always slower.
+@ [***]	which is also ~35% better than compiler generated code. Dual-
+@	issue Cortex A8 core was measured to process input block in
+@	~990 cycles.
+
+@ August 2010.
+@
+@ Rescheduling for dual-issue pipeline resulted in 13% improvement on
+@ Cortex A8 core and in absolute terms ~870 cycles per input block
+@ [or 13.6 cycles per byte].
+
+@ February 2011.
+@
+@ Profiler-assisted and platform-specific optimization resulted in 10%
+@ improvement on Cortex A8 core and 12.2 cycles per byte.
+
+#include <linux/linkage.h>
+
+.text
+
+.align	2
+ENTRY(sha1_block_data_order)
+	stmdb	sp!,{r4-r12,lr}
+	add	r2,r1,r2,lsl#6	@ r2 to point at the end of r1
+	ldmia	r0,{r3,r4,r5,r6,r7}
+.Lloop:
+	ldr	r8,.LK_00_19
+	mov	r14,sp
+	sub	sp,sp,#15*4
+	mov	r5,r5,ror#30
+	mov	r6,r6,ror#30
+	mov	r7,r7,ror#30		@ [6]
+.L_00_15:
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r5,r6			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	eor	r10,r5,r6			@ F_xx_xx
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r4,r10,ror#2
+	add	r7,r7,r9			@ E+=X[i]
+	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r6,r8,r6,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r4,r5			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r6,r8,r6,ror#2			@ E+=K_00_19
+	eor	r10,r4,r5			@ F_xx_xx
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r3,r10,ror#2
+	add	r6,r6,r9			@ E+=X[i]
+	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r5,r8,r5,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r3,r4			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r5,r8,r5,ror#2			@ E+=K_00_19
+	eor	r10,r3,r4			@ F_xx_xx
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r7,r10,ror#2
+	add	r5,r5,r9			@ E+=X[i]
+	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r4,r8,r4,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r7,r3			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r4,r8,r4,ror#2			@ E+=K_00_19
+	eor	r10,r7,r3			@ F_xx_xx
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r6,r10,ror#2
+	add	r4,r4,r9			@ E+=X[i]
+	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r3,r8,r3,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r6,r7			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r3,r8,r3,ror#2			@ E+=K_00_19
+	eor	r10,r6,r7			@ F_xx_xx
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r5,r10,ror#2
+	add	r3,r3,r9			@ E+=X[i]
+	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
+	cmp	r14,sp
+	bne	.L_00_15		@ [((11+4)*5+2)*3]
+	sub	sp,sp,#25*4
+#if __ARM_ARCH__<7
+	ldrb	r10,[r1,#2]
+	ldrb	r9,[r1,#3]
+	ldrb	r11,[r1,#1]
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	ldrb	r12,[r1],#4
+	orr	r9,r9,r10,lsl#8
+	eor	r10,r5,r6			@ F_xx_xx
+	orr	r9,r9,r11,lsl#16
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	orr	r9,r9,r12,lsl#24
+#else
+	ldr	r9,[r1],#4			@ handles unaligned
+	add	r7,r8,r7,ror#2			@ E+=K_00_19
+	eor	r10,r5,r6			@ F_xx_xx
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+#ifdef __ARMEL__
+	rev	r9,r9				@ byte swap
+#endif
+#endif
+	and	r10,r4,r10,ror#2
+	add	r7,r7,r9			@ E+=X[i]
+	eor	r10,r10,r6,ror#2		@ F_00_19(B,C,D)
+	str	r9,[r14,#-4]!
+	add	r7,r7,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r3,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	eor	r10,r10,r5,ror#2		@ F_00_19(B,C,D)
+	add	r6,r6,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r7,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	eor	r10,r10,r4,ror#2		@ F_00_19(B,C,D)
+	add	r5,r5,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r6,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	eor	r10,r10,r3,ror#2		@ F_00_19(B,C,D)
+	add	r4,r4,r10			@ E+=F_00_19(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r5,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	eor	r10,r10,r7,ror#2		@ F_00_19(B,C,D)
+	add	r3,r3,r10			@ E+=F_00_19(B,C,D)
+
+	ldr	r8,.LK_20_39		@ [+15+16*4]
+	cmn	sp,#0			@ [+3], clear carry to denote 20_39
+.L_20_39_or_60_79:
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r5,r6			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r4,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r7,r7,r9			@ E+=X[i]
+	add	r7,r7,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r3,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	add	r6,r6,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r7,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	add	r5,r5,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r6,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	add	r4,r4,r10			@ E+=F_20_39(B,C,D)
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	eor r10,r5,r10,ror#2					@ F_xx_xx
+						@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	add	r3,r3,r10			@ E+=F_20_39(B,C,D)
+ ARM(	teq	r14,sp		)	@ preserve carry
+ THUMB(	mov	r11,sp		)
+ THUMB(	teq	r14,r11		)	@ preserve carry
+	bne	.L_20_39_or_60_79	@ [+((12+3)*5+2)*4]
+	bcs	.L_done			@ [+((12+3)*5+2)*4], spare 300 bytes
+
+	ldr	r8,.LK_40_59
+	sub	sp,sp,#20*4		@ [+2]
+.L_40_59:
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r7,r8,r7,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r5,r6			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r7,r7,r3,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r4,r10,ror#2					@ F_xx_xx
+	and r11,r5,r6					@ F_xx_xx
+	add	r7,r7,r9			@ E+=X[i]
+	add	r7,r7,r10			@ E+=F_40_59(B,C,D)
+	add	r7,r7,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r6,r8,r6,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r4,r5			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r6,r6,r7,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r3,r10,ror#2					@ F_xx_xx
+	and r11,r4,r5					@ F_xx_xx
+	add	r6,r6,r9			@ E+=X[i]
+	add	r6,r6,r10			@ E+=F_40_59(B,C,D)
+	add	r6,r6,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r5,r8,r5,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r3,r4			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r5,r5,r6,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r7,r10,ror#2					@ F_xx_xx
+	and r11,r3,r4					@ F_xx_xx
+	add	r5,r5,r9			@ E+=X[i]
+	add	r5,r5,r10			@ E+=F_40_59(B,C,D)
+	add	r5,r5,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r4,r8,r4,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r7,r3			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r4,r4,r5,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r6,r10,ror#2					@ F_xx_xx
+	and r11,r7,r3					@ F_xx_xx
+	add	r4,r4,r9			@ E+=X[i]
+	add	r4,r4,r10			@ E+=F_40_59(B,C,D)
+	add	r4,r4,r11,ror#2
+	ldr	r9,[r14,#15*4]
+	ldr	r10,[r14,#13*4]
+	ldr	r11,[r14,#7*4]
+	add	r3,r8,r3,ror#2			@ E+=K_xx_xx
+	ldr	r12,[r14,#2*4]
+	eor	r9,r9,r10
+	eor	r11,r11,r12			@ 1 cycle stall
+	eor	r10,r6,r7			@ F_xx_xx
+	mov	r9,r9,ror#31
+	add	r3,r3,r4,ror#27			@ E+=ROR(A,27)
+	eor	r9,r9,r11,ror#31
+	str	r9,[r14,#-4]!
+	and r10,r5,r10,ror#2					@ F_xx_xx
+	and r11,r6,r7					@ F_xx_xx
+	add	r3,r3,r9			@ E+=X[i]
+	add	r3,r3,r10			@ E+=F_40_59(B,C,D)
+	add	r3,r3,r11,ror#2
+	cmp	r14,sp
+	bne	.L_40_59		@ [+((12+5)*5+2)*4]
+
+	ldr	r8,.LK_60_79
+	sub	sp,sp,#20*4
+	cmp	sp,#0			@ set carry to denote 60_79
+	b	.L_20_39_or_60_79	@ [+4], spare 300 bytes
+.L_done:
+	add	sp,sp,#80*4		@ "deallocate" stack frame
+	ldmia	r0,{r8,r9,r10,r11,r12}
+	add	r3,r8,r3
+	add	r4,r9,r4
+	add	r5,r10,r5,ror#2
+	add	r6,r11,r6,ror#2
+	add	r7,r12,r7,ror#2
+	stmia	r0,{r3,r4,r5,r6,r7}
+	teq	r1,r2
+	bne	.Lloop			@ [+18], total 1307
+
+	ldmia	sp!,{r4-r12,pc}
+.align	2
+.LK_00_19:	.word	0x5a827999
+.LK_20_39:	.word	0x6ed9eba1
+.LK_40_59:	.word	0x8f1bbcdc
+.LK_60_79:	.word	0xca62c1d6
+ENDPROC(sha1_block_data_order)
+.asciz	"SHA1 block transform for ARMv4, CRYPTOGAMS by <appro@openssl.org>"
+.align	2