aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-highbank/highbank.c
diff options
context:
space:
mode:
authorLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
committerLibravatar Linus Torvalds <torvalds@linux-foundation.org>2023-02-21 18:24:12 -0800
commit5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch)
treecc5c2d0a898769fd59549594fedb3ee6f84e59a0 /arch/arm/mach-highbank/highbank.c
downloadlinux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz
linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
Diffstat (limited to 'arch/arm/mach-highbank/highbank.c')
-rw-r--r--arch/arm/mach-highbank/highbank.c175
1 files changed, 175 insertions, 0 deletions
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
new file mode 100644
index 000000000..5d4f977ac
--- /dev/null
+++ b/arch/arm/mach-highbank/highbank.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2010-2011 Calxeda, Inc.
+ */
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clocksource.h>
+#include <linux/dma-map-ops.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/pl320-ipc.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/reboot.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/psci.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "core.h"
+#include "sysregs.h"
+
+void __iomem *sregs_base;
+void __iomem *scu_base_addr;
+
+static void __init highbank_scu_map_io(void)
+{
+ unsigned long base;
+
+ /* Get SCU base */
+ asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
+
+ scu_base_addr = ioremap(base, SZ_4K);
+}
+
+
+static void highbank_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+ if (reg == L2X0_CTRL)
+ highbank_smc1(0x102, val);
+ else
+ WARN_ONCE(1, "Highbank L2C310: ignoring write to reg 0x%x\n",
+ reg);
+}
+
+static void __init highbank_init_irq(void)
+{
+ irqchip_init();
+
+ if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
+ highbank_scu_map_io();
+}
+
+static void highbank_power_off(void)
+{
+ highbank_set_pwr_shutdown();
+
+ while (1)
+ cpu_do_idle();
+}
+
+static int highbank_platform_notifier(struct notifier_block *nb,
+ unsigned long event, void *__dev)
+{
+ struct resource *res;
+ int reg = -1;
+ u32 val;
+ struct device *dev = __dev;
+
+ if (event != BUS_NOTIFY_ADD_DEVICE)
+ return NOTIFY_DONE;
+
+ if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci"))
+ reg = 0xc;
+ else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci"))
+ reg = 0x18;
+ else if (of_device_is_compatible(dev->of_node, "arm,pl330"))
+ reg = 0x20;
+ else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) {
+ res = platform_get_resource(to_platform_device(dev),
+ IORESOURCE_MEM, 0);
+ if (res) {
+ if (res->start == 0xfff50000)
+ reg = 0;
+ else if (res->start == 0xfff51000)
+ reg = 4;
+ }
+ }
+
+ if (reg < 0)
+ return NOTIFY_DONE;
+
+ if (of_property_read_bool(dev->of_node, "dma-coherent")) {
+ val = readl(sregs_base + reg);
+ writel(val | 0xff01, sregs_base + reg);
+ dev->dma_coherent = true;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block highbank_amba_nb = {
+ .notifier_call = highbank_platform_notifier,
+};
+
+static struct notifier_block highbank_platform_nb = {
+ .notifier_call = highbank_platform_notifier,
+};
+
+static struct platform_device highbank_cpuidle_device = {
+ .name = "cpuidle-calxeda",
+};
+
+static int hb_keys_notifier(struct notifier_block *nb, unsigned long event, void *data)
+{
+ u32 key = *(u32 *)data;
+
+ if (event != 0x1000)
+ return 0;
+
+ if (key == KEY_POWER)
+ orderly_poweroff(false);
+ else if (key == 0xffff)
+ ctrl_alt_del();
+
+ return 0;
+}
+static struct notifier_block hb_keys_nb = {
+ .notifier_call = hb_keys_notifier,
+};
+
+static void __init highbank_init(void)
+{
+ struct device_node *np;
+
+ /* Map system registers */
+ np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
+ sregs_base = of_iomap(np, 0);
+ WARN_ON(!sregs_base);
+
+ pm_power_off = highbank_power_off;
+ highbank_pm_init();
+
+ bus_register_notifier(&platform_bus_type, &highbank_platform_nb);
+ bus_register_notifier(&amba_bustype, &highbank_amba_nb);
+
+ pl320_ipc_register_notifier(&hb_keys_nb);
+
+ if (psci_ops.cpu_suspend)
+ platform_device_register(&highbank_cpuidle_device);
+}
+
+static const char *const highbank_match[] __initconst = {
+ "calxeda,highbank",
+ "calxeda,ecx-2000",
+ NULL,
+};
+
+DT_MACHINE_START(HIGHBANK, "Highbank")
+#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
+ .dma_zone_size = (4ULL * SZ_1G),
+#endif
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .l2c_write_sec = highbank_l2c310_write_sec,
+ .init_irq = highbank_init_irq,
+ .init_machine = highbank_init,
+ .dt_compat = highbank_match,
+ .restart = highbank_restart,
+MACHINE_END