Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 562 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
new file mode 100644
index 000000000..5e3544a63
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -0,0 +1,562 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+
+/*
+ * OMAP2/3 PRCM base and module definitions
+ *
+ * Copyright (C) 2007-2009, 2011 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ */
+
+/* Module offsets from both CM_BASE & PRM_BASE */
+
+/*
+ * Offsets that are the same on 24xx and 34xx
+ *
+ * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is
+ * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
+ */
+#define OCP_MOD						0x000
+#define MPU_MOD						0x100
+#define CORE_MOD					0x200
+#define GFX_MOD						0x300
+#define WKUP_MOD					0x400
+#define PLL_MOD						0x500
+
+
+/* Chip-specific module offsets */
+#define OMAP24XX_GR_MOD					OCP_MOD
+#define OMAP24XX_DSP_MOD				0x800
+
+#define OMAP2430_MDM_MOD				0xc00
+
+/* IVA2 module is < base on 3430 */
+#define OMAP3430_IVA2_MOD				-0x800
+#define OMAP3430ES2_SGX_MOD				GFX_MOD
+#define OMAP3430_CCR_MOD				PLL_MOD
+#define OMAP3430_DSS_MOD				0x600
+#define OMAP3430_CAM_MOD				0x700
+#define OMAP3430_PER_MOD				0x800
+#define OMAP3430_EMU_MOD				0x900
+#define OMAP3430_GR_MOD					0xa00
+#define OMAP3430_NEON_MOD				0xb00
+#define OMAP3430ES2_USBHOST_MOD				0xc00
+
+/*
+ * TI81XX PRM module offsets
+ */
+#define TI814X_PRM_DSP_MOD				0x0a00
+#define TI814X_PRM_HDVICP_MOD				0x0c00
+#define TI814X_PRM_ISP_MOD				0x0d00
+#define TI814X_PRM_HDVPSS_MOD				0x0e00
+#define TI814X_PRM_GFX_MOD				0x0f00
+
+#define TI81XX_PRM_DEVICE_MOD			0x0000
+#define TI816X_PRM_ACTIVE_MOD			0x0a00
+#define TI81XX_PRM_DEFAULT_MOD			0x0b00
+#define TI816X_PRM_IVAHD0_MOD			0x0c00
+#define TI816X_PRM_IVAHD1_MOD			0x0d00
+#define TI816X_PRM_IVAHD2_MOD			0x0e00
+#define TI816X_PRM_SGX_MOD				0x0f00
+#define TI81XX_PRM_ALWON_MOD			0x1800
+
+/* 24XX register bits shared between CM & PRM registers */
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP2420_EN_MMC_SHIFT				26
+#define OMAP2420_EN_MMC_MASK				(1 << 26)
+#define OMAP24XX_EN_UART2_SHIFT				22
+#define OMAP24XX_EN_UART2_MASK				(1 << 22)
+#define OMAP24XX_EN_UART1_SHIFT				21
+#define OMAP24XX_EN_UART1_MASK				(1 << 21)
+#define OMAP24XX_EN_MCSPI2_SHIFT			18
+#define OMAP24XX_EN_MCSPI2_MASK				(1 << 18)
+#define OMAP24XX_EN_MCSPI1_SHIFT			17
+#define OMAP24XX_EN_MCSPI1_MASK				(1 << 17)
+#define OMAP24XX_EN_MCBSP2_SHIFT			16
+#define OMAP24XX_EN_MCBSP2_MASK				(1 << 16)
+#define OMAP24XX_EN_MCBSP1_SHIFT			15
+#define OMAP24XX_EN_MCBSP1_MASK				(1 << 15)
+#define OMAP24XX_EN_GPT12_SHIFT				14
+#define OMAP24XX_EN_GPT12_MASK				(1 << 14)
+#define OMAP24XX_EN_GPT11_SHIFT				13
+#define OMAP24XX_EN_GPT11_MASK				(1 << 13)
+#define OMAP24XX_EN_GPT10_SHIFT				12
+#define OMAP24XX_EN_GPT10_MASK				(1 << 12)
+#define OMAP24XX_EN_GPT9_SHIFT				11
+#define OMAP24XX_EN_GPT9_MASK				(1 << 11)
+#define OMAP24XX_EN_GPT8_SHIFT				10
+#define OMAP24XX_EN_GPT8_MASK				(1 << 10)
+#define OMAP24XX_EN_GPT7_SHIFT				9
+#define OMAP24XX_EN_GPT7_MASK				(1 << 9)
+#define OMAP24XX_EN_GPT6_SHIFT				8
+#define OMAP24XX_EN_GPT6_MASK				(1 << 8)
+#define OMAP24XX_EN_GPT5_SHIFT				7
+#define OMAP24XX_EN_GPT5_MASK				(1 << 7)
+#define OMAP24XX_EN_GPT4_SHIFT				6
+#define OMAP24XX_EN_GPT4_MASK				(1 << 6)
+#define OMAP24XX_EN_GPT3_SHIFT				5
+#define OMAP24XX_EN_GPT3_MASK				(1 << 5)
+#define OMAP24XX_EN_GPT2_SHIFT				4
+#define OMAP24XX_EN_GPT2_MASK				(1 << 4)
+#define OMAP2420_EN_VLYNQ_SHIFT				3
+#define OMAP2420_EN_VLYNQ_MASK				(1 << 3)
+
+/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_GPIO5_SHIFT				10
+#define OMAP2430_EN_GPIO5_MASK				(1 << 10)
+#define OMAP2430_EN_MCSPI3_SHIFT			9
+#define OMAP2430_EN_MCSPI3_MASK				(1 << 9)
+#define OMAP2430_EN_MMCHS2_SHIFT			8
+#define OMAP2430_EN_MMCHS2_MASK				(1 << 8)
+#define OMAP2430_EN_MMCHS1_SHIFT			7
+#define OMAP2430_EN_MMCHS1_MASK				(1 << 7)
+#define OMAP24XX_EN_UART3_SHIFT				2
+#define OMAP24XX_EN_UART3_MASK				(1 << 2)
+#define OMAP24XX_EN_USB_SHIFT				0
+#define OMAP24XX_EN_USB_MASK				(1 << 0)
+
+/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_MDM_INTC_SHIFT			11
+#define OMAP2430_EN_MDM_INTC_MASK			(1 << 11)
+#define OMAP2430_EN_USBHS_SHIFT				6
+#define OMAP2430_EN_USBHS_MASK				(1 << 6)
+#define OMAP24XX_EN_GPMC_SHIFT				1
+#define OMAP24XX_EN_GPMC_MASK				(1 << 1)
+
+/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
+#define OMAP2420_ST_MMC_SHIFT				26
+#define OMAP2420_ST_MMC_MASK				(1 << 26)
+#define OMAP24XX_ST_UART2_SHIFT				22
+#define OMAP24XX_ST_UART2_MASK				(1 << 22)
+#define OMAP24XX_ST_UART1_SHIFT				21
+#define OMAP24XX_ST_UART1_MASK				(1 << 21)
+#define OMAP24XX_ST_MCSPI2_SHIFT			18
+#define OMAP24XX_ST_MCSPI2_MASK				(1 << 18)
+#define OMAP24XX_ST_MCSPI1_SHIFT			17
+#define OMAP24XX_ST_MCSPI1_MASK				(1 << 17)
+#define OMAP24XX_ST_MCBSP2_SHIFT			16
+#define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
+#define OMAP24XX_ST_MCBSP1_SHIFT			15
+#define OMAP24XX_ST_MCBSP1_MASK				(1 << 15)
+#define OMAP24XX_ST_GPT12_SHIFT				14
+#define OMAP24XX_ST_GPT12_MASK				(1 << 14)
+#define OMAP24XX_ST_GPT11_SHIFT				13
+#define OMAP24XX_ST_GPT11_MASK				(1 << 13)
+#define OMAP24XX_ST_GPT10_SHIFT				12
+#define OMAP24XX_ST_GPT10_MASK				(1 << 12)
+#define OMAP24XX_ST_GPT9_SHIFT				11
+#define OMAP24XX_ST_GPT9_MASK				(1 << 11)
+#define OMAP24XX_ST_GPT8_SHIFT				10
+#define OMAP24XX_ST_GPT8_MASK				(1 << 10)
+#define OMAP24XX_ST_GPT7_SHIFT				9
+#define OMAP24XX_ST_GPT7_MASK				(1 << 9)
+#define OMAP24XX_ST_GPT6_SHIFT				8
+#define OMAP24XX_ST_GPT6_MASK				(1 << 8)
+#define OMAP24XX_ST_GPT5_SHIFT				7
+#define OMAP24XX_ST_GPT5_MASK				(1 << 7)
+#define OMAP24XX_ST_GPT4_SHIFT				6
+#define OMAP24XX_ST_GPT4_MASK				(1 << 6)
+#define OMAP24XX_ST_GPT3_SHIFT				5
+#define OMAP24XX_ST_GPT3_MASK				(1 << 5)
+#define OMAP24XX_ST_GPT2_SHIFT				4
+#define OMAP24XX_ST_GPT2_MASK				(1 << 4)
+#define OMAP2420_ST_VLYNQ_SHIFT				3
+#define OMAP2420_ST_VLYNQ_MASK				(1 << 3)
+
+/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
+#define OMAP2430_ST_MDM_INTC_SHIFT			11
+#define OMAP2430_ST_MDM_INTC_MASK			(1 << 11)
+#define OMAP2430_ST_GPIO5_SHIFT				10
+#define OMAP2430_ST_GPIO5_MASK				(1 << 10)
+#define OMAP2430_ST_MCSPI3_SHIFT			9
+#define OMAP2430_ST_MCSPI3_MASK				(1 << 9)
+#define OMAP2430_ST_MMCHS2_SHIFT			8
+#define OMAP2430_ST_MMCHS2_MASK				(1 << 8)
+#define OMAP2430_ST_MMCHS1_SHIFT			7
+#define OMAP2430_ST_MMCHS1_MASK				(1 << 7)
+#define OMAP2430_ST_USBHS_SHIFT				6
+#define OMAP2430_ST_USBHS_MASK				(1 << 6)
+#define OMAP24XX_ST_UART3_SHIFT				2
+#define OMAP24XX_ST_UART3_MASK				(1 << 2)
+#define OMAP24XX_ST_USB_SHIFT				0
+#define OMAP24XX_ST_USB_MASK				(1 << 0)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP24XX_EN_GPIOS_SHIFT				2
+#define OMAP24XX_EN_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_EN_GPT1_SHIFT				0
+#define OMAP24XX_EN_GPT1_MASK				(1 << 0)
+
+/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
+#define OMAP24XX_ST_GPIOS_SHIFT				2
+#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_32KSYNC_SHIFT			1
+#define OMAP24XX_ST_32KSYNC_MASK			(1 << 1)
+#define OMAP24XX_ST_GPT1_SHIFT				0
+#define OMAP24XX_ST_GPT1_MASK				(1 << 0)
+
+/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
+#define OMAP2430_ST_MDM_SHIFT				0
+#define OMAP2430_ST_MDM_MASK				(1 << 0)
+
+
+/* 3430 register bits shared between CM & PRM registers */
+
+/* CM_REVISION, PRM_REVISION shared bits */
+#define OMAP3430_REV_SHIFT				0
+#define OMAP3430_REV_MASK				(0xff << 0)
+
+/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
+#define OMAP3430_AUTOIDLE_MASK				(1 << 0)
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_MMC3_MASK				(1 << 30)
+#define OMAP3430_EN_MMC3_SHIFT				30
+#define OMAP3430_EN_MMC2_MASK				(1 << 25)
+#define OMAP3430_EN_MMC2_SHIFT				25
+#define OMAP3430_EN_MMC1_MASK				(1 << 24)
+#define OMAP3430_EN_MMC1_SHIFT				24
+#define AM35XX_EN_UART4_MASK				(1 << 23)
+#define AM35XX_EN_UART4_SHIFT				23
+#define OMAP3430_EN_MCSPI4_MASK				(1 << 21)
+#define OMAP3430_EN_MCSPI4_SHIFT			21
+#define OMAP3430_EN_MCSPI3_MASK				(1 << 20)
+#define OMAP3430_EN_MCSPI3_SHIFT			20
+#define OMAP3430_EN_MCSPI2_MASK				(1 << 19)
+#define OMAP3430_EN_MCSPI2_SHIFT			19
+#define OMAP3430_EN_MCSPI1_MASK				(1 << 18)
+#define OMAP3430_EN_MCSPI1_SHIFT			18
+#define OMAP3430_EN_I2C3_MASK				(1 << 17)
+#define OMAP3430_EN_I2C3_SHIFT				17
+#define OMAP3430_EN_I2C2_MASK				(1 << 16)
+#define OMAP3430_EN_I2C2_SHIFT				16
+#define OMAP3430_EN_I2C1_MASK				(1 << 15)
+#define OMAP3430_EN_I2C1_SHIFT				15
+#define OMAP3430_EN_UART2_MASK				(1 << 14)
+#define OMAP3430_EN_UART2_SHIFT				14
+#define OMAP3430_EN_UART1_MASK				(1 << 13)
+#define OMAP3430_EN_UART1_SHIFT				13
+#define OMAP3430_EN_GPT11_MASK				(1 << 12)
+#define OMAP3430_EN_GPT11_SHIFT				12
+#define OMAP3430_EN_GPT10_MASK				(1 << 11)
+#define OMAP3430_EN_GPT10_SHIFT				11
+#define OMAP3430_EN_MCBSP5_MASK				(1 << 10)
+#define OMAP3430_EN_MCBSP5_SHIFT			10
+#define OMAP3430_EN_MCBSP1_MASK				(1 << 9)
+#define OMAP3430_EN_MCBSP1_SHIFT			9
+#define OMAP3430_EN_FSHOSTUSB_MASK			(1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430_EN_D2D_MASK				(1 << 3)
+#define OMAP3430_EN_D2D_SHIFT				3
+
+/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT			4
+
+/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
+#define OMAP3430_ST_MMC3_SHIFT				30
+#define OMAP3430_ST_MMC3_MASK				(1 << 30)
+#define OMAP3430_ST_MMC2_SHIFT				25
+#define OMAP3430_ST_MMC2_MASK				(1 << 25)
+#define OMAP3430_ST_MMC1_SHIFT				24
+#define OMAP3430_ST_MMC1_MASK				(1 << 24)
+#define OMAP3430_ST_MCSPI4_SHIFT			21
+#define OMAP3430_ST_MCSPI4_MASK				(1 << 21)
+#define OMAP3430_ST_MCSPI3_SHIFT			20
+#define OMAP3430_ST_MCSPI3_MASK				(1 << 20)
+#define OMAP3430_ST_MCSPI2_SHIFT			19
+#define OMAP3430_ST_MCSPI2_MASK				(1 << 19)
+#define OMAP3430_ST_MCSPI1_SHIFT			18
+#define OMAP3430_ST_MCSPI1_MASK				(1 << 18)
+#define OMAP3430_ST_I2C3_SHIFT				17
+#define OMAP3430_ST_I2C3_MASK				(1 << 17)
+#define OMAP3430_ST_I2C2_SHIFT				16
+#define OMAP3430_ST_I2C2_MASK				(1 << 16)
+#define OMAP3430_ST_I2C1_SHIFT				15
+#define OMAP3430_ST_I2C1_MASK				(1 << 15)
+#define OMAP3430_ST_UART2_SHIFT				14
+#define OMAP3430_ST_UART2_MASK				(1 << 14)
+#define OMAP3430_ST_UART1_SHIFT				13
+#define OMAP3430_ST_UART1_MASK				(1 << 13)
+#define OMAP3430_ST_GPT11_SHIFT				12
+#define OMAP3430_ST_GPT11_MASK				(1 << 12)
+#define OMAP3430_ST_GPT10_SHIFT				11
+#define OMAP3430_ST_GPT10_MASK				(1 << 11)
+#define OMAP3430_ST_MCBSP5_SHIFT			10
+#define OMAP3430_ST_MCBSP5_MASK				(1 << 10)
+#define OMAP3430_ST_MCBSP1_SHIFT			9
+#define OMAP3430_ST_MCBSP1_MASK				(1 << 9)
+#define OMAP3430ES1_ST_FSHOSTUSB_SHIFT			5
+#define OMAP3430ES1_ST_FSHOSTUSB_MASK			(1 << 5)
+#define OMAP3430ES1_ST_HSOTGUSB_SHIFT			4
+#define OMAP3430ES1_ST_HSOTGUSB_MASK			(1 << 4)
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT		5
+#define OMAP3430ES2_ST_HSOTGUSB_IDLE_MASK		(1 << 5)
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT		4
+#define OMAP3430ES2_ST_HSOTGUSB_STDBY_MASK		(1 << 4)
+#define OMAP3430_ST_D2D_SHIFT				3
+#define OMAP3430_ST_D2D_MASK				(1 << 3)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPIO1_MASK				(1 << 3)
+#define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT12_MASK				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
+#define OMAP3430_EN_GPT1_MASK				(1 << 0)
+#define OMAP3430_EN_GPT1_SHIFT				0
+
+/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_SR2_MASK				(1 << 7)
+#define OMAP3430_EN_SR2_SHIFT				7
+#define OMAP3430_EN_SR1_MASK				(1 << 6)
+#define OMAP3430_EN_SR1_SHIFT				6
+
+/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPT12_MASK				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
+
+/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
+#define OMAP3430_ST_SR2_SHIFT				7
+#define OMAP3430_ST_SR2_MASK				(1 << 7)
+#define OMAP3430_ST_SR1_SHIFT				6
+#define OMAP3430_ST_SR1_MASK				(1 << 6)
+#define OMAP3430_ST_GPIO1_SHIFT				3
+#define OMAP3430_ST_GPIO1_MASK				(1 << 3)
+#define OMAP3430_ST_32KSYNC_SHIFT			2
+#define OMAP3430_ST_32KSYNC_MASK			(1 << 2)
+#define OMAP3430_ST_GPT12_SHIFT				1
+#define OMAP3430_ST_GPT12_MASK				(1 << 1)
+#define OMAP3430_ST_GPT1_SHIFT				0
+#define OMAP3430_ST_GPT1_MASK				(1 << 0)
+
+/*
+ * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
+ * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
+ * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
+ */
+#define OMAP3430_EN_MPU_MASK				(1 << 1)
+#define OMAP3430_EN_MPU_SHIFT				1
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
+
+#define OMAP3630_EN_UART4_MASK				(1 << 18)
+#define OMAP3630_EN_UART4_SHIFT				18
+#define OMAP3430_EN_GPIO6_MASK				(1 << 17)
+#define OMAP3430_EN_GPIO6_SHIFT				17
+#define OMAP3430_EN_GPIO5_MASK				(1 << 16)
+#define OMAP3430_EN_GPIO5_SHIFT				16
+#define OMAP3430_EN_GPIO4_MASK				(1 << 15)
+#define OMAP3430_EN_GPIO4_SHIFT				15
+#define OMAP3430_EN_GPIO3_MASK				(1 << 14)
+#define OMAP3430_EN_GPIO3_SHIFT				14
+#define OMAP3430_EN_GPIO2_MASK				(1 << 13)
+#define OMAP3430_EN_GPIO2_SHIFT				13
+#define OMAP3430_EN_UART3_MASK				(1 << 11)
+#define OMAP3430_EN_UART3_SHIFT				11
+#define OMAP3430_EN_GPT9_MASK				(1 << 10)
+#define OMAP3430_EN_GPT9_SHIFT				10
+#define OMAP3430_EN_GPT8_MASK				(1 << 9)
+#define OMAP3430_EN_GPT8_SHIFT				9
+#define OMAP3430_EN_GPT7_MASK				(1 << 8)
+#define OMAP3430_EN_GPT7_SHIFT				8
+#define OMAP3430_EN_GPT6_MASK				(1 << 7)
+#define OMAP3430_EN_GPT6_SHIFT				7
+#define OMAP3430_EN_GPT5_MASK				(1 << 6)
+#define OMAP3430_EN_GPT5_SHIFT				6
+#define OMAP3430_EN_GPT4_MASK				(1 << 5)
+#define OMAP3430_EN_GPT4_SHIFT				5
+#define OMAP3430_EN_GPT3_MASK				(1 << 4)
+#define OMAP3430_EN_GPT3_SHIFT				4
+#define OMAP3430_EN_GPT2_MASK				(1 << 3)
+#define OMAP3430_EN_GPT2_SHIFT				3
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
+/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
+ * be ST_* bits instead? */
+#define OMAP3430_EN_MCBSP4_MASK				(1 << 2)
+#define OMAP3430_EN_MCBSP4_SHIFT			2
+#define OMAP3430_EN_MCBSP3_MASK				(1 << 1)
+#define OMAP3430_EN_MCBSP3_SHIFT			1
+#define OMAP3430_EN_MCBSP2_MASK				(1 << 0)
+#define OMAP3430_EN_MCBSP2_SHIFT			0
+
+/* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3630_ST_UART4_SHIFT				18
+#define OMAP3630_ST_UART4_MASK				(1 << 18)
+#define OMAP3430_ST_GPIO6_SHIFT				17
+#define OMAP3430_ST_GPIO6_MASK				(1 << 17)
+#define OMAP3430_ST_GPIO5_SHIFT				16
+#define OMAP3430_ST_GPIO5_MASK				(1 << 16)
+#define OMAP3430_ST_GPIO4_SHIFT				15
+#define OMAP3430_ST_GPIO4_MASK				(1 << 15)
+#define OMAP3430_ST_GPIO3_SHIFT				14
+#define OMAP3430_ST_GPIO3_MASK				(1 << 14)
+#define OMAP3430_ST_GPIO2_SHIFT				13
+#define OMAP3430_ST_GPIO2_MASK				(1 << 13)
+#define OMAP3430_ST_UART3_SHIFT				11
+#define OMAP3430_ST_UART3_MASK				(1 << 11)
+#define OMAP3430_ST_GPT9_SHIFT				10
+#define OMAP3430_ST_GPT9_MASK				(1 << 10)
+#define OMAP3430_ST_GPT8_SHIFT				9
+#define OMAP3430_ST_GPT8_MASK				(1 << 9)
+#define OMAP3430_ST_GPT7_SHIFT				8
+#define OMAP3430_ST_GPT7_MASK				(1 << 8)
+#define OMAP3430_ST_GPT6_SHIFT				7
+#define OMAP3430_ST_GPT6_MASK				(1 << 7)
+#define OMAP3430_ST_GPT5_SHIFT				6
+#define OMAP3430_ST_GPT5_MASK				(1 << 6)
+#define OMAP3430_ST_GPT4_SHIFT				5
+#define OMAP3430_ST_GPT4_MASK				(1 << 5)
+#define OMAP3430_ST_GPT3_SHIFT				4
+#define OMAP3430_ST_GPT3_MASK				(1 << 4)
+#define OMAP3430_ST_GPT2_SHIFT				3
+#define OMAP3430_ST_GPT2_MASK				(1 << 3)
+
+/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
+#define OMAP3430_EN_CORE_SHIFT				0
+#define OMAP3430_EN_CORE_MASK				(1 << 0)
+
+
+
+/*
+ * Maximum time(us) it takes to output the signal WUCLKOUT of the last
+ * pad of the I/O ring after asserting WUCLKIN high.  Tero measured
+ * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4
+ * microseconds on OMAP4, so this timeout may be too high.
+ */
+#define MAX_IOPAD_LATCH_TIME			100
+# ifndef __ASSEMBLER__
+
+#include <linux/delay.h>
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
+/**
+ * struct omap_prcm_irq - describes a PRCM interrupt bit
+ * @name: a short name describing the interrupt type, e.g. "wkup" or "io"
+ * @offset: the bit shift of the interrupt inside the IRQ{ENABLE,STATUS} regs
+ * @priority: should this interrupt be handled before @priority=false IRQs?
+ *
+ * Describes interrupt bits inside the PRM_IRQ{ENABLE,STATUS}_MPU* registers.
+ * On systems with multiple PRM MPU IRQ registers, the bitfields read from
+ * the registers are concatenated, so @offset could be > 31 on these systems -
+ * see omap_prm_irq_handler() for more details.  I/O ring interrupts should
+ * have @priority set to true.
+ */
+struct omap_prcm_irq {
+	const char *name;
+	unsigned int offset;
+	bool priority;
+};
+
+/**
+ * struct omap_prcm_irq_setup - PRCM interrupt controller details
+ * @ack: PRM register offset for the first PRM_IRQSTATUS_MPU register
+ * @mask: PRM register offset for the first PRM_IRQENABLE_MPU register
+ * @pm_ctrl: PRM register offset for the PRM_IO_PMCTRL register
+ * @nr_regs: number of PRM_IRQ{STATUS,ENABLE}_MPU* registers
+ * @nr_irqs: number of entries in the @irqs array
+ * @irqs: ptr to an array of PRCM interrupt bits (see @nr_irqs)
+ * @irq: MPU IRQ asserted when a PRCM interrupt arrives
+ * @read_pending_irqs: fn ptr to determine if any PRCM IRQs are pending
+ * @ocp_barrier: fn ptr to force buffered PRM writes to complete
+ * @save_and_clear_irqen: fn ptr to save and clear IRQENABLE regs
+ * @restore_irqen: fn ptr to save and clear IRQENABLE regs
+ * @reconfigure_io_chain: fn ptr to reconfigure IO chain
+ * @saved_mask: IRQENABLE regs are saved here during suspend
+ * @priority_mask: 1 bit per IRQ, set to 1 if omap_prcm_irq.priority = true
+ * @base_irq: base dynamic IRQ number, returned from irq_alloc_descs() in init
+ * @suspended: set to true after Linux suspend code has called our ->prepare()
+ * @suspend_save_flag: set to true after IRQ masks have been saved and disabled
+ *
+ * @saved_mask, @priority_mask, @base_irq, @suspended, and
+ * @suspend_save_flag are populated dynamically, and are not to be
+ * specified in static initializers.
+ */
+struct omap_prcm_irq_setup {
+	u16 ack;
+	u16 mask;
+	u16 pm_ctrl;
+	u8 nr_regs;
+	u8 nr_irqs;
+	const struct omap_prcm_irq *irqs;
+	int irq;
+	void (*read_pending_irqs)(unsigned long *events);
+	void (*ocp_barrier)(void);
+	void (*save_and_clear_irqen)(u32 *saved_mask);
+	void (*restore_irqen)(u32 *saved_mask);
+	void (*reconfigure_io_chain)(void);
+	u32 *saved_mask;
+	u32 *priority_mask;
+	int base_irq;
+	bool suspended;
+	bool suspend_save_flag;
+};
+
+/* OMAP_PRCM_IRQ: convenience macro for creating struct omap_prcm_irq records */
+#define OMAP_PRCM_IRQ(_name, _offset, _priority) {	\
+	.name = _name,					\
+	.offset = _offset,				\
+	.priority = _priority				\
+	}
+
+struct omap_domain_base {
+	u32 pa;
+	void __iomem *va;
+	s16 offset;
+};
+
+/**
+ * struct omap_prcm_init_data - PRCM driver init data
+ * @index: clock memory mapping index to be used
+ * @mem: IO mem pointer for this module
+ * @phys: IO mem physical base address for this module
+ * @offset: module base address offset from the IO base
+ * @flags: PRCM module init flags
+ * @device_inst_offset: device instance offset within the module address space
+ * @init: low level PRCM init function for this module
+ * @np: device node for this PRCM module
+ */
+struct omap_prcm_init_data {
+	int index;
+	void __iomem *mem;
+	u32 phys;
+	s16 offset;
+	u16 flags;
+	s32 device_inst_offset;
+	int (*init)(const struct omap_prcm_init_data *data);
+	struct device_node *np;
+};
+
+extern int omap_prcm_register_chain_handler(
+	struct omap_prcm_irq_setup *irq_setup);
+extern int omap_prcm_event_to_irq(const char *event);
+extern void omap_prcm_irq_prepare(void);
+extern void omap_prcm_irq_complete(void);
+
+# endif
+
+#endif
+