Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

7 files changed, 569 insertions, 0 deletions

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
new file mode 100644
index 000000000..055de578b
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+#		http://www.samsung.com/
+
+# Configuration options for the S5PV210/S5PC110
+
+config ARCH_S5PV210
+	bool "Samsung S5PV210/S5PC110"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK_SAMSUNG
+	select GPIOLIB
+	select PINCTRL
+	select PINCTRL_EXYNOS
+	select SOC_SAMSUNG
+	help
+	  Samsung S5PV210/S5PC110 series based systems
+
+if ARCH_S5PV210
+
+config CPU_S5PV210
+	def_bool y
+	select ARM_AMBA
+	select PL330_DMA if DMADEVICES
+	help
+	  Enable S5PV210 CPU support
+
+endif
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
new file mode 100644
index 000000000..aa0a1f091
--- /dev/null
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2010 Samsung Electronics Co., Ltd.
+# 		http://www.samsung.com/
+
+obj-$(CONFIG_PM_SLEEP)		+= pm.o sleep.o
+obj-y				+= s5pv210.o
diff --git a/arch/arm/mach-s5pv210/common.h b/arch/arm/mach-s5pv210/common.h
new file mode 100644
index 000000000..cb36058bc
--- /dev/null
+++ b/arch/arm/mach-s5pv210/common.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Common Header for S5PV210 machines
+ */
+
+#ifndef __ARCH_ARM_MACH_S5PV210_COMMON_H
+#define __ARCH_ARM_MACH_S5PV210_COMMON_H
+
+#ifdef CONFIG_PM_SLEEP
+void s5pv210_cpu_resume(void);
+void s5pv210_pm_init(void);
+#else
+static inline void s5pv210_pm_init(void) {}
+#endif
+
+#endif /* __ARCH_ARM_MACH_S5PV210_COMMON_H */
diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c
new file mode 100644
index 000000000..d59c094cd
--- /dev/null
+++ b/arch/arm/mach-s5pv210/pm.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
+//		http://www.samsung.com
+//
+// S5PV210 - Power Management support
+//
+// Based on arch/arm/mach-s3c2410/pm.c
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/io.h>
+#include <linux/soc/samsung/s3c-pm.h>
+
+#include <asm/cacheflush.h>
+#include <asm/suspend.h>
+
+#include "common.h"
+#include "regs-clock.h"
+
+/* helper functions to save and restore register state */
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+/**
+ * s3c_pm_do_save() - save a set of registers for restoration on resume.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Run through the list of registers given, saving their contents in the
+ * array for later restoration when we wakeup.
+ */
+static void s3c_pm_do_save(struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++) {
+		ptr->val = readl_relaxed(ptr->reg);
+		S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
+	}
+}
+
+/**
+ * s3c_pm_do_restore() - restore register values from the save list.
+ * @ptr: Pointer to an array of registers.
+ * @count: Size of the ptr array.
+ *
+ * Restore the register values saved from s3c_pm_do_save().
+ *
+ * WARNING: Do not put any debug in here that may effect memory or use
+ * peripherals, as things may be changing!
+*/
+
+static void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
+{
+	for (; count > 0; count--, ptr++)
+		writel_relaxed(ptr->val, ptr->reg);
+}
+
+static struct sleep_save s5pv210_core_save[] = {
+	/* Clock ETC */
+	SAVE_ITEM(S5P_MDNIE_SEL),
+};
+
+/*
+ * VIC wake-up support (TODO)
+ */
+static u32 s5pv210_irqwake_intmask = 0xffffffff;
+
+static u32 s5pv210_read_eint_wakeup_mask(void)
+{
+	return __raw_readl(S5P_EINT_WAKEUP_MASK);
+}
+
+/*
+ * Suspend helpers.
+ */
+static int s5pv210_cpu_suspend(unsigned long arg)
+{
+	unsigned long tmp;
+
+	/* issue the standby signal into the pm unit. Note, we
+	 * issue a write-buffer drain just in case */
+
+	tmp = 0;
+
+	asm("b 1f\n\t"
+	    ".align 5\n\t"
+	    "1:\n\t"
+	    "mcr p15, 0, %0, c7, c10, 5\n\t"
+	    "mcr p15, 0, %0, c7, c10, 4\n\t"
+	    "wfi" : : "r" (tmp));
+
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
+}
+
+static void s5pv210_pm_prepare(void)
+{
+	unsigned int tmp;
+
+	/*
+	 * Set wake-up mask registers
+	 * S5P_EINT_WAKEUP_MASK is set by pinctrl driver in late suspend.
+	 */
+	__raw_writel(s5pv210_irqwake_intmask, S5P_WAKEUP_MASK);
+
+	/* ensure at least INFORM0 has the resume address */
+	__raw_writel(__pa_symbol(s5pv210_cpu_resume), S5P_INFORM0);
+
+	tmp = __raw_readl(S5P_SLEEP_CFG);
+	tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN);
+	__raw_writel(tmp, S5P_SLEEP_CFG);
+
+	/* WFI for SLEEP mode configuration by SYSCON */
+	tmp = __raw_readl(S5P_PWR_CFG);
+	tmp &= S5P_CFG_WFI_CLEAN;
+	tmp |= S5P_CFG_WFI_SLEEP;
+	__raw_writel(tmp, S5P_PWR_CFG);
+
+	/* SYSCON interrupt handling disable */
+	tmp = __raw_readl(S5P_OTHERS);
+	tmp |= S5P_OTHER_SYSC_INTOFF;
+	__raw_writel(tmp, S5P_OTHERS);
+
+	s3c_pm_do_save(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+}
+
+/*
+ * Suspend operations.
+ */
+static int s5pv210_suspend_enter(suspend_state_t state)
+{
+	u32 eint_wakeup_mask = s5pv210_read_eint_wakeup_mask();
+	int ret;
+
+	S3C_PMDBG("%s: suspending the system...\n", __func__);
+
+	S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
+			s5pv210_irqwake_intmask, eint_wakeup_mask);
+
+	if (s5pv210_irqwake_intmask == -1U
+	    && eint_wakeup_mask == -1U) {
+		pr_err("%s: No wake-up sources!\n", __func__);
+		pr_err("%s: Aborting sleep\n", __func__);
+		return -EINVAL;
+	}
+
+	s3c_pm_save_uarts(false);
+	s5pv210_pm_prepare();
+	flush_cache_all();
+	s3c_pm_check_store();
+
+	ret = cpu_suspend(0, s5pv210_cpu_suspend);
+	if (ret)
+		return ret;
+
+	s3c_pm_restore_uarts(false);
+
+	S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+			__raw_readl(S5P_WAKEUP_STAT));
+
+	s3c_pm_check_restore();
+
+	S3C_PMDBG("%s: resuming the system...\n", __func__);
+
+	return 0;
+}
+
+static int s5pv210_suspend_prepare(void)
+{
+	s3c_pm_check_prepare();
+
+	return 0;
+}
+
+static void s5pv210_suspend_finish(void)
+{
+	s3c_pm_check_cleanup();
+}
+
+static const struct platform_suspend_ops s5pv210_suspend_ops = {
+	.enter		= s5pv210_suspend_enter,
+	.prepare	= s5pv210_suspend_prepare,
+	.finish		= s5pv210_suspend_finish,
+	.valid		= suspend_valid_only_mem,
+};
+
+/*
+ * Syscore operations used to delay restore of certain registers.
+ */
+static void s5pv210_pm_resume(void)
+{
+	s3c_pm_do_restore_core(s5pv210_core_save, ARRAY_SIZE(s5pv210_core_save));
+}
+
+static struct syscore_ops s5pv210_pm_syscore_ops = {
+	.resume		= s5pv210_pm_resume,
+};
+
+/*
+ * Initialization entry point.
+ */
+void __init s5pv210_pm_init(void)
+{
+	register_syscore_ops(&s5pv210_pm_syscore_ops);
+	suspend_set_ops(&s5pv210_suspend_ops);
+}
diff --git a/arch/arm/mach-s5pv210/regs-clock.h b/arch/arm/mach-s5pv210/regs-clock.h
new file mode 100644
index 000000000..9cad2306e
--- /dev/null
+++ b/arch/arm/mach-s5pv210/regs-clock.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - Clock register definitions
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H __FILE__
+
+#define S3C_ADDR_BASE		0xF6000000
+#define S3C_ADDR(x)		((void __iomem __force *)S3C_ADDR_BASE + (x))
+#define S3C_VA_SYS		S3C_ADDR(0x00100000)
+
+#define S5P_CLKREG(x)		(S3C_VA_SYS + (x))
+
+#define S5P_APLL_LOCK		S5P_CLKREG(0x00)
+#define S5P_MPLL_LOCK		S5P_CLKREG(0x08)
+#define S5P_EPLL_LOCK		S5P_CLKREG(0x10)
+#define S5P_VPLL_LOCK		S5P_CLKREG(0x20)
+
+#define S5P_APLL_CON		S5P_CLKREG(0x100)
+#define S5P_MPLL_CON		S5P_CLKREG(0x108)
+#define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_EPLL_CON1		S5P_CLKREG(0x114)
+#define S5P_VPLL_CON		S5P_CLKREG(0x120)
+
+#define S5P_CLK_SRC0		S5P_CLKREG(0x200)
+#define S5P_CLK_SRC1		S5P_CLKREG(0x204)
+#define S5P_CLK_SRC2		S5P_CLKREG(0x208)
+#define S5P_CLK_SRC3		S5P_CLKREG(0x20C)
+#define S5P_CLK_SRC4		S5P_CLKREG(0x210)
+#define S5P_CLK_SRC5		S5P_CLKREG(0x214)
+#define S5P_CLK_SRC6		S5P_CLKREG(0x218)
+
+#define S5P_CLK_SRC_MASK0	S5P_CLKREG(0x280)
+#define S5P_CLK_SRC_MASK1	S5P_CLKREG(0x284)
+
+#define S5P_CLK_DIV0		S5P_CLKREG(0x300)
+#define S5P_CLK_DIV1		S5P_CLKREG(0x304)
+#define S5P_CLK_DIV2		S5P_CLKREG(0x308)
+#define S5P_CLK_DIV3		S5P_CLKREG(0x30C)
+#define S5P_CLK_DIV4		S5P_CLKREG(0x310)
+#define S5P_CLK_DIV5		S5P_CLKREG(0x314)
+#define S5P_CLK_DIV6		S5P_CLKREG(0x318)
+#define S5P_CLK_DIV7		S5P_CLKREG(0x31C)
+
+#define S5P_CLKGATE_MAIN0	S5P_CLKREG(0x400)
+#define S5P_CLKGATE_MAIN1	S5P_CLKREG(0x404)
+#define S5P_CLKGATE_MAIN2	S5P_CLKREG(0x408)
+
+#define S5P_CLKGATE_PERI0	S5P_CLKREG(0x420)
+#define S5P_CLKGATE_PERI1	S5P_CLKREG(0x424)
+
+#define S5P_CLKGATE_SCLK0	S5P_CLKREG(0x440)
+#define S5P_CLKGATE_SCLK1	S5P_CLKREG(0x444)
+#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
+#define S5P_CLKGATE_IP1		S5P_CLKREG(0x464)
+#define S5P_CLKGATE_IP2		S5P_CLKREG(0x468)
+#define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
+#define S5P_CLKGATE_IP4		S5P_CLKREG(0x470)
+
+#define S5P_CLKGATE_BLOCK	S5P_CLKREG(0x480)
+#define S5P_CLKGATE_BUS0	S5P_CLKREG(0x484)
+#define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
+#define S5P_CLK_OUT		S5P_CLKREG(0x500)
+
+/* DIV/MUX STATUS */
+#define S5P_CLKDIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1	S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1	S5P_CLKREG(0x1104)
+
+/* CLKSRC0 */
+#define S5P_CLKSRC0_MUX200_SHIFT	(16)
+#define S5P_CLKSRC0_MUX200_MASK		(0x1 << S5P_CLKSRC0_MUX200_SHIFT)
+#define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
+#define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
+
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT           (0)
+#define S5P_CLKSRC2_G3D_MASK            (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT           (4)
+#define S5P_CLKSRC2_MFC_MASK            (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKSRC6*/
+#define S5P_CLKSRC6_ONEDRAM_SHIFT       (24)
+#define S5P_CLKSRC6_ONEDRAM_MASK        (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT)
+
+/* CLKDIV0 */
+#define S5P_CLKDIV0_APLL_SHIFT		(0)
+#define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
+#define S5P_CLKDIV0_A2M_SHIFT		(4)
+#define S5P_CLKDIV0_A2M_MASK		(0x7 << S5P_CLKDIV0_A2M_SHIFT)
+#define S5P_CLKDIV0_HCLK200_SHIFT	(8)
+#define S5P_CLKDIV0_HCLK200_MASK	(0x7 << S5P_CLKDIV0_HCLK200_SHIFT)
+#define S5P_CLKDIV0_PCLK100_SHIFT	(12)
+#define S5P_CLKDIV0_PCLK100_MASK	(0x7 << S5P_CLKDIV0_PCLK100_SHIFT)
+#define S5P_CLKDIV0_HCLK166_SHIFT	(16)
+#define S5P_CLKDIV0_HCLK166_MASK	(0xF << S5P_CLKDIV0_HCLK166_SHIFT)
+#define S5P_CLKDIV0_PCLK83_SHIFT	(20)
+#define S5P_CLKDIV0_PCLK83_MASK		(0x7 << S5P_CLKDIV0_PCLK83_SHIFT)
+#define S5P_CLKDIV0_HCLK133_SHIFT	(24)
+#define S5P_CLKDIV0_HCLK133_MASK	(0xF << S5P_CLKDIV0_HCLK133_SHIFT)
+#define S5P_CLKDIV0_PCLK66_SHIFT	(28)
+#define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
+
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT           (0)
+#define S5P_CLKDIV2_G3D_MASK            (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT           (4)
+#define S5P_CLKDIV2_MFC_MASK            (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT       (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK        (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
+#define S5P_SWRESET		S5P_CLKREG(0x2000)
+
+#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
+
+/* Registers related to power management */
+#define S5P_PWR_CFG		S5P_CLKREG(0xC000)
+#define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
+#define S5P_WAKEUP_MASK		S5P_CLKREG(0xC008)
+#define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
+#define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
+#define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
+#define S5P_STOP_CFG		S5P_CLKREG(0xC030)
+#define S5P_STOP_MEM_CFG	S5P_CLKREG(0xC034)
+#define S5P_SLEEP_CFG		S5P_CLKREG(0xC040)
+
+#define S5P_OSC_FREQ		S5P_CLKREG(0xC100)
+#define S5P_OSC_STABLE		S5P_CLKREG(0xC104)
+#define S5P_PWR_STABLE		S5P_CLKREG(0xC108)
+#define S5P_MTC_STABLE		S5P_CLKREG(0xC110)
+#define S5P_CLAMP_STABLE	S5P_CLKREG(0xC114)
+
+#define S5P_WAKEUP_STAT		S5P_CLKREG(0xC200)
+#define S5P_BLK_PWR_STAT	S5P_CLKREG(0xC204)
+
+#define S5P_OTHERS		S5P_CLKREG(0xE000)
+#define S5P_OM_STAT		S5P_CLKREG(0xE100)
+#define S5P_HDMI_PHY_CONTROL	S5P_CLKREG(0xE804)
+#define S5P_USB_PHY_CONTROL	S5P_CLKREG(0xE80C)
+#define S5P_DAC_PHY_CONTROL	S5P_CLKREG(0xE810)
+
+#define S5P_INFORM0		S5P_CLKREG(0xF000)
+#define S5P_INFORM1		S5P_CLKREG(0xF004)
+#define S5P_INFORM2		S5P_CLKREG(0xF008)
+#define S5P_INFORM3		S5P_CLKREG(0xF00C)
+#define S5P_INFORM4		S5P_CLKREG(0xF010)
+#define S5P_INFORM5		S5P_CLKREG(0xF014)
+#define S5P_INFORM6		S5P_CLKREG(0xF018)
+#define S5P_INFORM7		S5P_CLKREG(0xF01C)
+
+#define S5P_RST_STAT		S5P_CLKREG(0xA000)
+#define S5P_OSC_CON		S5P_CLKREG(0x8000)
+#define S5P_MDNIE_SEL		S5P_CLKREG(0x7008)
+#define S5P_MIPI_PHY_CON0	S5P_CLKREG(0x7200)
+#define S5P_MIPI_PHY_CON1	S5P_CLKREG(0x7204)
+
+#define S5P_IDLE_CFG_TL_MASK	(3 << 30)
+#define S5P_IDLE_CFG_TM_MASK	(3 << 28)
+#define S5P_IDLE_CFG_TL_ON	(2 << 30)
+#define S5P_IDLE_CFG_TM_ON	(2 << 28)
+#define S5P_IDLE_CFG_DIDLE	(1 << 0)
+
+#define S5P_CFG_WFI_CLEAN		(~(3 << 8))
+#define S5P_CFG_WFI_IDLE		(1 << 8)
+#define S5P_CFG_WFI_STOP		(2 << 8)
+#define S5P_CFG_WFI_SLEEP		(3 << 8)
+
+#define S5P_OTHER_SYS_INT		24
+#define S5P_OTHER_STA_TYPE		23
+#define S5P_OTHER_SYSC_INTOFF		(1 << 0)
+#define STA_TYPE_EXPON			0
+#define STA_TYPE_SFR			1
+
+#define S5P_PWR_STA_EXP_SCALE		0
+#define S5P_PWR_STA_CNT			4
+
+#define S5P_PWR_STABLE_COUNT		85500
+
+#define S5P_SLEEP_CFG_OSC_EN		(1 << 0)
+#define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
+
+/* OTHERS Resgister */
+#define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
+
+/* S5P_DAC_CONTROL */
+#define S5P_DAC_ENABLE			(1)
+#define S5P_DAC_DISABLE			(0)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-s5pv210/s5pv210.c b/arch/arm/mach-s5pv210/s5pv210.c
new file mode 100644
index 000000000..a21ed3bb9
--- /dev/null
+++ b/arch/arm/mach-s5pv210/s5pv210.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Samsung's S5PC110/S5PV210 flattened device tree enabled machine.
+//
+// Copyright (c) 2013-2014 Samsung Electronics Co., Ltd.
+// Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
+// Tomasz Figa <t.figa@samsung.com>
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+
+#include "common.h"
+#include "regs-clock.h"
+
+static int __init s5pv210_fdt_map_sys(unsigned long node, const char *uname,
+					int depth, void *data)
+{
+	struct map_desc iodesc;
+	const __be32 *reg;
+	int len;
+
+	if (!of_flat_dt_is_compatible(node, "samsung,s5pv210-clock"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "reg", &len);
+	if (reg == NULL || len != (sizeof(unsigned long) * 2))
+		return 0;
+
+	iodesc.pfn = __phys_to_pfn(be32_to_cpu(reg[0]));
+	iodesc.length = be32_to_cpu(reg[1]) - 1;
+	iodesc.virtual = (unsigned long)S3C_VA_SYS;
+	iodesc.type = MT_DEVICE;
+	iotable_init(&iodesc, 1);
+
+	return 1;
+}
+
+static void __init s5pv210_dt_map_io(void)
+{
+	debug_ll_io_init();
+
+	of_scan_flat_dt(s5pv210_fdt_map_sys, NULL);
+}
+
+static void s5pv210_dt_restart(enum reboot_mode mode, const char *cmd)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
+static void __init s5pv210_dt_init_late(void)
+{
+	platform_device_register_simple("s5pv210-cpufreq", -1, NULL, 0);
+	s5pv210_pm_init();
+}
+
+static char const *const s5pv210_dt_compat[] __initconst = {
+	"samsung,s5pc110",
+	"samsung,s5pv210",
+	NULL
+};
+
+DT_MACHINE_START(S5PV210_DT, "Samsung S5PC110/S5PV210-based board")
+	.dt_compat = s5pv210_dt_compat,
+	.map_io = s5pv210_dt_map_io,
+	.restart = s5pv210_dt_restart,
+	.init_late = s5pv210_dt_init_late,
+MACHINE_END
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
new file mode 100644
index 000000000..81568767f
--- /dev/null
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 Sleep Code
+ * Based on S3C64XX sleep code by:
+ *	Ben Dooks, (c) 2008 Simtec Electronics
+ */
+
+#include <linux/linkage.h>
+
+	.text
+	.align
+
+	/*
+	 * sleep magic, to allow the bootloader to check for an valid
+	 * image to resume to. Must be the first word before the
+	 * s3c_cpu_resume entry.
+	 */
+
+	.word	0x2bedf00d
+
+	/*
+	 * s3c_cpu_resume
+	 *
+	 * resume code entry for bootloader to call
+	 */
+
+ENTRY(s5pv210_cpu_resume)
+	b	cpu_resume
+ENDPROC(s5pv210_cpu_resume)