Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 336 insertions, 0 deletions

diff --git a/arch/arm/mach-versatile/integrator-hardware.h b/arch/arm/mach-versatile/integrator-hardware.h
new file mode 100644
index 000000000..81ce09e3a
--- /dev/null
+++ b/arch/arm/mach-versatile/integrator-hardware.h
@@ -0,0 +1,336 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1998-1999 ARM Limited.
+ */
+#ifndef INTEGRATOR_HARDWARE_H
+#define INTEGRATOR_HARDWARE_H
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
+#define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
+
+/*
+ *  Integrator memory map
+ */
+#define INTEGRATOR_BOOT_ROM_LO          0x00000000
+#define INTEGRATOR_BOOT_ROM_HI          0x20000000
+#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
+#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
+
+/*
+ * New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ * fitted can be found in HDR_STAT.
+ *
+ * The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ * the minimum amount of SSRAM fitted on any core module.
+ *
+ * New Core Modules also alias the SSRAM.
+ *
+ */
+#define INTEGRATOR_SSRAM_BASE           0x00000000
+#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
+#define INTEGRATOR_SSRAM_SIZE           SZ_256K
+
+#define INTEGRATOR_FLASH_BASE           0x24000000
+#define INTEGRATOR_FLASH_SIZE           SZ_32M
+
+#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
+#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
+
+/*
+ *  SDRAM is a SIMM therefore the size is not known.
+ */
+#define INTEGRATOR_SDRAM_BASE           0x00040000
+
+#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
+#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
+#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
+
+/*
+ *  Logic expansion modules
+ *
+ */
+#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
+#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
+#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
+
+/*
+ * Integrator header card registers
+ */
+#define INTEGRATOR_HDR_ID_OFFSET        0x00
+#define INTEGRATOR_HDR_PROC_OFFSET      0x04
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
+#define INTEGRATOR_HDR_STAT_OFFSET      0x10
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
+#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
+#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
+#define INTEGRATOR_HDR_IC_OFFSET        0x40
+#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
+#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
+
+#define INTEGRATOR_HDR_BASE             0x10000000
+#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
+#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
+#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
+#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
+#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
+#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
+#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
+#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
+#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
+#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
+#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
+
+#define INTEGRATOR_HDR_CTRL_LED         0x01
+#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
+#define INTEGRATOR_HDR_CTRL_REMAP       0x04
+#define INTEGRATOR_HDR_CTRL_RESET       0x08
+#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
+#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
+#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
+#define INTEGRATOR_HDR_CTRL_SYNC        0x80
+
+#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
+#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
+#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
+#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
+#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
+#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
+#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
+#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
+#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
+#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
+#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
+#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
+#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
+#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
+#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
+#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
+#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
+#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
+#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
+#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
+#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
+#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
+#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
+#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
+#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
+#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
+#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
+#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
+#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
+#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
+#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
+#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
+
+#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
+#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
+#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
+#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
+#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
+#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
+#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
+#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
+#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
+#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
+#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
+
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
+
+#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
+
+/*
+ * Integrator system registers
+ */
+
+/*
+ *  System Controller
+ */
+#define INTEGRATOR_SC_ID_OFFSET         0x00
+#define INTEGRATOR_SC_OSC_OFFSET        0x04
+#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
+#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
+#define INTEGRATOR_SC_DEC_OFFSET        0x10
+#define INTEGRATOR_SC_ARB_OFFSET        0x14
+#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
+
+#define INTEGRATOR_SC_BASE              0x11000000
+#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
+#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
+#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
+#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
+#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
+#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
+#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
+
+#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
+#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
+#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
+#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
+#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
+#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
+
+#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
+#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
+#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
+
+#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
+#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
+#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
+#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
+#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
+#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
+#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
+
+/*
+ *  External Bus Interface
+ */
+#define INTEGRATOR_EBI_BASE             0x12000000
+
+#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
+#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
+#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
+#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
+#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
+
+#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
+#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
+#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
+#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
+#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
+
+#define INTEGRATOR_EBI_8_BIT            0x00
+#define INTEGRATOR_EBI_16_BIT           0x01
+#define INTEGRATOR_EBI_32_BIT           0x02
+#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
+#define INTEGRATOR_EBI_SYNC             0x08
+#define INTEGRATOR_EBI_WS_2             0x00
+#define INTEGRATOR_EBI_WS_3             0x10
+#define INTEGRATOR_EBI_WS_4             0x20
+#define INTEGRATOR_EBI_WS_5             0x30
+#define INTEGRATOR_EBI_WS_6             0x40
+#define INTEGRATOR_EBI_WS_7             0x50
+#define INTEGRATOR_EBI_WS_8             0x60
+#define INTEGRATOR_EBI_WS_9             0x70
+#define INTEGRATOR_EBI_WS_10            0x80
+#define INTEGRATOR_EBI_WS_11            0x90
+#define INTEGRATOR_EBI_WS_12            0xA0
+#define INTEGRATOR_EBI_WS_13            0xB0
+#define INTEGRATOR_EBI_WS_14            0xC0
+#define INTEGRATOR_EBI_WS_15            0xD0
+#define INTEGRATOR_EBI_WS_16            0xE0
+#define INTEGRATOR_EBI_WS_17            0xF0
+
+
+#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
+#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
+#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
+#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
+#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
+#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
+#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
+
+/*
+ *  LED's & Switches
+ */
+#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
+#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
+#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
+
+#define INTEGRATOR_DBG_BASE             0x1A000000
+#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
+#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
+#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+
+#define INTEGRATOR_AP_GPIO_BASE		0x1B000000	/* GPIO */
+
+#define INTEGRATOR_CP_MMC_BASE		0x1C000000	/* MMC */
+#define INTEGRATOR_CP_AACI_BASE		0x1D000000	/* AACI */
+#define INTEGRATOR_CP_ETH_BASE		0xC8000000	/* Ethernet */
+#define INTEGRATOR_CP_GPIO_BASE		0xC9000000	/* GPIO */
+#define INTEGRATOR_CP_SIC_BASE		0xCA000000	/* SIC */
+#define INTEGRATOR_CP_CTL_BASE		0xCB000000	/* CP system control */
+
+/* PS2 Keyboard interface */
+#define KMI0_BASE                       INTEGRATOR_KBD_BASE
+
+/* PS2 Mouse interface */
+#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
+
+/*
+ * Integrator Interrupt Controllers
+ *
+ *
+ * Offsets from interrupt controller base
+ *
+ * System Controller interrupt controller base is
+ *
+ * 	INTEGRATOR_IC_BASE + (header_number << 6)
+ *
+ * Core Module interrupt controller base is
+ *
+ * 	INTEGRATOR_HDR_IC
+ */
+#define IRQ_STATUS                      0
+#define IRQ_RAW_STATUS                  0x04
+#define IRQ_ENABLE                      0x08
+#define IRQ_ENABLE_SET                  0x08
+#define IRQ_ENABLE_CLEAR                0x0C
+
+#define INT_SOFT_SET                    0x10
+#define INT_SOFT_CLEAR                  0x14
+
+#define FIQ_STATUS                      0x20
+#define FIQ_RAW_STATUS                  0x24
+#define FIQ_ENABLE                      0x28
+#define FIQ_ENABLE_SET                  0x28
+#define FIQ_ENABLE_CLEAR                0x2C
+
+
+/*
+ * LED's
+ */
+#define GREEN_LED                       0x01
+#define YELLOW_LED                      0x02
+#define RED_LED                         0x04
+#define GREEN_LED_2                     0x08
+#define ALL_LEDS                        0x0F
+
+#define LED_BANK                        INTEGRATOR_DBG_LEDS
+
+/*
+ *  Timer definitions
+ *
+ *  Only use timer 1 & 2
+ *  (both run at 24MHz and will need the clock divider set to 16).
+ *
+ *  Timer 0 runs at bus frequency
+ */
+#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
+#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
+#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
+
+#define INTEGRATOR_CSR_BASE             0x10000000
+#define INTEGRATOR_CSR_SIZE             0x10000000
+
+#endif /* INTEGRATOR_HARDWARE_H */