Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 565 insertions, 0 deletions

diff --git a/arch/arm/mm/cache-l2x0-pmu.c b/arch/arm/mm/cache-l2x0-pmu.c
new file mode 100644
index 000000000..993fefdc1
--- /dev/null
+++ b/arch/arm/mm/cache-l2x0-pmu.c
@@ -0,0 +1,565 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * L220/L310 cache controller support
+ *
+ * Copyright (C) 2016 ARM Limited
+ */
+#include <linux/errno.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <asm/hardware/cache-l2x0.h>
+
+#define PMU_NR_COUNTERS 2
+
+static void __iomem *l2x0_base;
+static struct pmu *l2x0_pmu;
+static cpumask_t pmu_cpu;
+
+static const char *l2x0_name;
+
+static ktime_t l2x0_pmu_poll_period;
+static struct hrtimer l2x0_pmu_hrtimer;
+
+/*
+ * The L220/PL310 PMU has two equivalent counters, Counter1 and Counter0.
+ * Registers controlling these are laid out in pairs, in descending order, i.e.
+ * the register for Counter1 comes first, followed by the register for
+ * Counter0.
+ * We ensure that idx 0 -> Counter0, and idx1 -> Counter1.
+ */
+static struct perf_event *events[PMU_NR_COUNTERS];
+
+/* Find an unused counter */
+static int l2x0_pmu_find_idx(void)
+{
+	int i;
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (!events[i])
+			return i;
+	}
+
+	return -1;
+}
+
+/* How many counters are allocated? */
+static int l2x0_pmu_num_active_counters(void)
+{
+	int i, cnt = 0;
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			cnt++;
+	}
+
+	return cnt;
+}
+
+static void l2x0_pmu_counter_config_write(int idx, u32 val)
+{
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_CFG - 4 * idx);
+}
+
+static u32 l2x0_pmu_counter_read(int idx)
+{
+	return readl_relaxed(l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx);
+}
+
+static void l2x0_pmu_counter_write(int idx, u32 val)
+{
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT0_VAL - 4 * idx);
+}
+
+static void __l2x0_pmu_enable(void)
+{
+	u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL);
+	val |= L2X0_EVENT_CNT_CTRL_ENABLE;
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL);
+}
+
+static void __l2x0_pmu_disable(void)
+{
+	u32 val = readl_relaxed(l2x0_base + L2X0_EVENT_CNT_CTRL);
+	val &= ~L2X0_EVENT_CNT_CTRL_ENABLE;
+	writel_relaxed(val, l2x0_base + L2X0_EVENT_CNT_CTRL);
+}
+
+static void l2x0_pmu_enable(struct pmu *pmu)
+{
+	if (l2x0_pmu_num_active_counters() == 0)
+		return;
+
+	__l2x0_pmu_enable();
+}
+
+static void l2x0_pmu_disable(struct pmu *pmu)
+{
+	if (l2x0_pmu_num_active_counters() == 0)
+		return;
+
+	__l2x0_pmu_disable();
+}
+
+static void warn_if_saturated(u32 count)
+{
+	if (count != 0xffffffff)
+		return;
+
+	pr_warn_ratelimited("L2X0 counter saturated. Poll period too long\n");
+}
+
+static void l2x0_pmu_event_read(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+	u64 prev_count, new_count, mask;
+
+	do {
+		 prev_count = local64_read(&hw->prev_count);
+		 new_count = l2x0_pmu_counter_read(hw->idx);
+	} while (local64_xchg(&hw->prev_count, new_count) != prev_count);
+
+	mask = GENMASK_ULL(31, 0);
+	local64_add((new_count - prev_count) & mask, &event->count);
+
+	warn_if_saturated(new_count);
+}
+
+static void l2x0_pmu_event_configure(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	/*
+	 * The L2X0 counters saturate at 0xffffffff rather than wrapping, so we
+	 * will *always* lose some number of events when a counter saturates,
+	 * and have no way of detecting how many were lost.
+	 *
+	 * To minimize the impact of this, we try to maximize the period by
+	 * always starting counters at zero. To ensure that group ratios are
+	 * representative, we poll periodically to avoid counters saturating.
+	 * See l2x0_pmu_poll().
+	 */
+	local64_set(&hw->prev_count, 0);
+	l2x0_pmu_counter_write(hw->idx, 0);
+}
+
+static enum hrtimer_restart l2x0_pmu_poll(struct hrtimer *hrtimer)
+{
+	unsigned long flags;
+	int i;
+
+	local_irq_save(flags);
+	__l2x0_pmu_disable();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		struct perf_event *event = events[i];
+
+		if (!event)
+			continue;
+
+		l2x0_pmu_event_read(event);
+		l2x0_pmu_event_configure(event);
+	}
+
+	__l2x0_pmu_enable();
+	local_irq_restore(flags);
+
+	hrtimer_forward_now(hrtimer, l2x0_pmu_poll_period);
+	return HRTIMER_RESTART;
+}
+
+
+static void __l2x0_pmu_event_enable(int idx, u32 event)
+{
+	u32 val;
+
+	val = event << L2X0_EVENT_CNT_CFG_SRC_SHIFT;
+	val |= L2X0_EVENT_CNT_CFG_INT_DISABLED;
+	l2x0_pmu_counter_config_write(idx, val);
+}
+
+static void l2x0_pmu_event_start(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(!(event->hw.state & PERF_HES_STOPPED)))
+		return;
+
+	if (flags & PERF_EF_RELOAD) {
+		WARN_ON_ONCE(!(hw->state & PERF_HES_UPTODATE));
+		l2x0_pmu_event_configure(event);
+	}
+
+	hw->state = 0;
+
+	__l2x0_pmu_event_enable(hw->idx, hw->config_base);
+}
+
+static void __l2x0_pmu_event_disable(int idx)
+{
+	u32 val;
+
+	val = L2X0_EVENT_CNT_CFG_SRC_DISABLED << L2X0_EVENT_CNT_CFG_SRC_SHIFT;
+	val |= L2X0_EVENT_CNT_CFG_INT_DISABLED;
+	l2x0_pmu_counter_config_write(idx, val);
+}
+
+static void l2x0_pmu_event_stop(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (WARN_ON_ONCE(event->hw.state & PERF_HES_STOPPED))
+		return;
+
+	__l2x0_pmu_event_disable(hw->idx);
+
+	hw->state |= PERF_HES_STOPPED;
+
+	if (flags & PERF_EF_UPDATE) {
+		l2x0_pmu_event_read(event);
+		hw->state |= PERF_HES_UPTODATE;
+	}
+}
+
+static int l2x0_pmu_event_add(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+	int idx = l2x0_pmu_find_idx();
+
+	if (idx == -1)
+		return -EAGAIN;
+
+	/*
+	 * Pin the timer, so that the overflows are handled by the chosen
+	 * event->cpu (this is the same one as presented in "cpumask"
+	 * attribute).
+	 */
+	if (l2x0_pmu_num_active_counters() == 0)
+		hrtimer_start(&l2x0_pmu_hrtimer, l2x0_pmu_poll_period,
+			      HRTIMER_MODE_REL_PINNED);
+
+	events[idx] = event;
+	hw->idx = idx;
+
+	l2x0_pmu_event_configure(event);
+
+	hw->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+
+	if (flags & PERF_EF_START)
+		l2x0_pmu_event_start(event, 0);
+
+	return 0;
+}
+
+static void l2x0_pmu_event_del(struct perf_event *event, int flags)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	l2x0_pmu_event_stop(event, PERF_EF_UPDATE);
+
+	events[hw->idx] = NULL;
+	hw->idx = -1;
+
+	if (l2x0_pmu_num_active_counters() == 0)
+		hrtimer_cancel(&l2x0_pmu_hrtimer);
+}
+
+static bool l2x0_pmu_group_is_valid(struct perf_event *event)
+{
+	struct pmu *pmu = event->pmu;
+	struct perf_event *leader = event->group_leader;
+	struct perf_event *sibling;
+	int num_hw = 0;
+
+	if (leader->pmu == pmu)
+		num_hw++;
+	else if (!is_software_event(leader))
+		return false;
+
+	for_each_sibling_event(sibling, leader) {
+		if (sibling->pmu == pmu)
+			num_hw++;
+		else if (!is_software_event(sibling))
+			return false;
+	}
+
+	return num_hw <= PMU_NR_COUNTERS;
+}
+
+static int l2x0_pmu_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hw = &event->hw;
+
+	if (event->attr.type != l2x0_pmu->type)
+		return -ENOENT;
+
+	if (is_sampling_event(event) ||
+	    event->attach_state & PERF_ATTACH_TASK)
+		return -EINVAL;
+
+	if (event->cpu < 0)
+		return -EINVAL;
+
+	if (event->attr.config & ~L2X0_EVENT_CNT_CFG_SRC_MASK)
+		return -EINVAL;
+
+	hw->config_base = event->attr.config;
+
+	if (!l2x0_pmu_group_is_valid(event))
+		return -EINVAL;
+
+	event->cpu = cpumask_first(&pmu_cpu);
+
+	return 0;
+}
+
+struct l2x0_event_attribute {
+	struct device_attribute attr;
+	unsigned int config;
+	bool pl310_only;
+};
+
+#define L2X0_EVENT_ATTR(_name, _config, _pl310_only)				\
+	(&((struct l2x0_event_attribute[]) {{					\
+		.attr = __ATTR(_name, S_IRUGO, l2x0_pmu_event_show, NULL),	\
+		.config = _config,						\
+		.pl310_only = _pl310_only,					\
+	}})[0].attr.attr)
+
+#define L220_PLUS_EVENT_ATTR(_name, _config)					\
+	L2X0_EVENT_ATTR(_name, _config, false)
+
+#define PL310_EVENT_ATTR(_name, _config)					\
+	L2X0_EVENT_ATTR(_name, _config, true)
+
+static ssize_t l2x0_pmu_event_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct l2x0_event_attribute *lattr;
+
+	lattr = container_of(attr, typeof(*lattr), attr);
+	return snprintf(buf, PAGE_SIZE, "config=0x%x\n", lattr->config);
+}
+
+static umode_t l2x0_pmu_event_attr_is_visible(struct kobject *kobj,
+					      struct attribute *attr,
+					      int unused)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct pmu *pmu = dev_get_drvdata(dev);
+	struct l2x0_event_attribute *lattr;
+
+	lattr = container_of(attr, typeof(*lattr), attr.attr);
+
+	if (!lattr->pl310_only || strcmp("l2c_310", pmu->name) == 0)
+		return attr->mode;
+
+	return 0;
+}
+
+static struct attribute *l2x0_pmu_event_attrs[] = {
+	L220_PLUS_EVENT_ATTR(co,	0x1),
+	L220_PLUS_EVENT_ATTR(drhit,	0x2),
+	L220_PLUS_EVENT_ATTR(drreq,	0x3),
+	L220_PLUS_EVENT_ATTR(dwhit,	0x4),
+	L220_PLUS_EVENT_ATTR(dwreq,	0x5),
+	L220_PLUS_EVENT_ATTR(dwtreq,	0x6),
+	L220_PLUS_EVENT_ATTR(irhit,	0x7),
+	L220_PLUS_EVENT_ATTR(irreq,	0x8),
+	L220_PLUS_EVENT_ATTR(wa,	0x9),
+	PL310_EVENT_ATTR(ipfalloc,	0xa),
+	PL310_EVENT_ATTR(epfhit,	0xb),
+	PL310_EVENT_ATTR(epfalloc,	0xc),
+	PL310_EVENT_ATTR(srrcvd,	0xd),
+	PL310_EVENT_ATTR(srconf,	0xe),
+	PL310_EVENT_ATTR(epfrcvd,	0xf),
+	NULL
+};
+
+static struct attribute_group l2x0_pmu_event_attrs_group = {
+	.name = "events",
+	.attrs = l2x0_pmu_event_attrs,
+	.is_visible = l2x0_pmu_event_attr_is_visible,
+};
+
+static ssize_t l2x0_pmu_cpumask_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return cpumap_print_to_pagebuf(true, buf, &pmu_cpu);
+}
+
+static struct device_attribute l2x0_pmu_cpumask_attr =
+		__ATTR(cpumask, S_IRUGO, l2x0_pmu_cpumask_show, NULL);
+
+static struct attribute *l2x0_pmu_cpumask_attrs[] = {
+	&l2x0_pmu_cpumask_attr.attr,
+	NULL,
+};
+
+static struct attribute_group l2x0_pmu_cpumask_attr_group = {
+	.attrs = l2x0_pmu_cpumask_attrs,
+};
+
+static const struct attribute_group *l2x0_pmu_attr_groups[] = {
+	&l2x0_pmu_event_attrs_group,
+	&l2x0_pmu_cpumask_attr_group,
+	NULL,
+};
+
+static void l2x0_pmu_reset(void)
+{
+	int i;
+
+	__l2x0_pmu_disable();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++)
+		__l2x0_pmu_event_disable(i);
+}
+
+static int l2x0_pmu_offline_cpu(unsigned int cpu)
+{
+	unsigned int target;
+
+	if (!cpumask_test_and_clear_cpu(cpu, &pmu_cpu))
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	perf_pmu_migrate_context(l2x0_pmu, cpu, target);
+	cpumask_set_cpu(target, &pmu_cpu);
+
+	return 0;
+}
+
+void l2x0_pmu_suspend(void)
+{
+	int i;
+
+	if (!l2x0_pmu)
+		return;
+
+	l2x0_pmu_disable(l2x0_pmu);
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			l2x0_pmu_event_stop(events[i], PERF_EF_UPDATE);
+	}
+
+}
+
+void l2x0_pmu_resume(void)
+{
+	int i;
+
+	if (!l2x0_pmu)
+		return;
+
+	l2x0_pmu_reset();
+
+	for (i = 0; i < PMU_NR_COUNTERS; i++) {
+		if (events[i])
+			l2x0_pmu_event_start(events[i], PERF_EF_RELOAD);
+	}
+
+	l2x0_pmu_enable(l2x0_pmu);
+}
+
+void __init l2x0_pmu_register(void __iomem *base, u32 part)
+{
+	/*
+	 * Determine whether we support the PMU, and choose the name for sysfs.
+	 * This is also used by l2x0_pmu_event_attr_is_visible to determine
+	 * which events to display, as the PL310 PMU supports a superset of
+	 * L220 events.
+	 *
+	 * The L210 PMU has a different programmer's interface, and is not
+	 * supported by this driver.
+	 *
+	 * We must defer registering the PMU until the perf subsystem is up and
+	 * running, so just stash the name and base, and leave that to another
+	 * initcall.
+	 */
+	switch (part & L2X0_CACHE_ID_PART_MASK) {
+	case L2X0_CACHE_ID_PART_L220:
+		l2x0_name = "l2c_220";
+		break;
+	case L2X0_CACHE_ID_PART_L310:
+		l2x0_name = "l2c_310";
+		break;
+	default:
+		return;
+	}
+
+	l2x0_base = base;
+}
+
+static __init int l2x0_pmu_init(void)
+{
+	int ret;
+
+	if (!l2x0_base)
+		return 0;
+
+	l2x0_pmu = kzalloc(sizeof(*l2x0_pmu), GFP_KERNEL);
+	if (!l2x0_pmu) {
+		pr_warn("Unable to allocate L2x0 PMU\n");
+		return -ENOMEM;
+	}
+
+	*l2x0_pmu = (struct pmu) {
+		.task_ctx_nr = perf_invalid_context,
+		.pmu_enable = l2x0_pmu_enable,
+		.pmu_disable = l2x0_pmu_disable,
+		.read = l2x0_pmu_event_read,
+		.start = l2x0_pmu_event_start,
+		.stop = l2x0_pmu_event_stop,
+		.add = l2x0_pmu_event_add,
+		.del = l2x0_pmu_event_del,
+		.event_init = l2x0_pmu_event_init,
+		.attr_groups = l2x0_pmu_attr_groups,
+		.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+	};
+
+	l2x0_pmu_reset();
+
+	/*
+	 * We always use a hrtimer rather than an interrupt.
+	 * See comments in l2x0_pmu_event_configure and l2x0_pmu_poll.
+	 *
+	 * Polling once a second allows the counters to fill up to 1/128th on a
+	 * quad-core test chip with cores clocked at 400MHz. Hopefully this
+	 * leaves sufficient headroom to avoid overflow on production silicon
+	 * at higher frequencies.
+	 */
+	l2x0_pmu_poll_period = ms_to_ktime(1000);
+	hrtimer_init(&l2x0_pmu_hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+	l2x0_pmu_hrtimer.function = l2x0_pmu_poll;
+
+	cpumask_set_cpu(0, &pmu_cpu);
+	ret = cpuhp_setup_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE,
+					"perf/arm/l2x0:online", NULL,
+					l2x0_pmu_offline_cpu);
+	if (ret)
+		goto out_pmu;
+
+	ret = perf_pmu_register(l2x0_pmu, l2x0_name, -1);
+	if (ret)
+		goto out_cpuhp;
+
+	return 0;
+
+out_cpuhp:
+	cpuhp_remove_state_nocalls(CPUHP_AP_PERF_ARM_L2X0_ONLINE);
+out_pmu:
+	kfree(l2x0_pmu);
+	l2x0_pmu = NULL;
+	return ret;
+}
+device_initcall(l2x0_pmu_init);