Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 385 insertions, 0 deletions

diff --git a/arch/arm/probes/decode.h b/arch/arm/probes/decode.h
new file mode 100644
index 000000000..facc889d0
--- /dev/null
+++ b/arch/arm/probes/decode.h
@@ -0,0 +1,385 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/probes/decode.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * Some contents moved here from arch/arm/include/asm/kprobes.h which is
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ */
+
+#ifndef _ARM_KERNEL_PROBES_H
+#define  _ARM_KERNEL_PROBES_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/probes.h>
+#include <asm/ptrace.h>
+#include <asm/kprobes.h>
+
+void __init arm_probes_decode_init(void);
+
+extern probes_check_cc * const probes_condition_checks[16];
+
+#if __LINUX_ARM_ARCH__ >= 7
+
+/* str_pc_offset is architecturally defined from ARMv7 onwards */
+#define str_pc_offset 8
+#define find_str_pc_offset()
+
+#else /* __LINUX_ARM_ARCH__ < 7 */
+
+/* We need a run-time check to determine str_pc_offset */
+extern int str_pc_offset;
+void __init find_str_pc_offset(void);
+
+#endif
+
+
+static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
+{
+	long cpsr = regs->ARM_cpsr;
+	if (pcv & 0x1) {
+		cpsr |= PSR_T_BIT;
+		pcv &= ~0x1;
+	} else {
+		cpsr &= ~PSR_T_BIT;
+		pcv &= ~0x2;	/* Avoid UNPREDICTABLE address allignment */
+	}
+	regs->ARM_cpsr = cpsr;
+	regs->ARM_pc = pcv;
+}
+
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/* Kernels built for >= ARMv6 should never run on <= ARMv5 hardware, so... */
+#define load_write_pc_interworks true
+#define test_load_write_pc_interworking()
+
+#else /* __LINUX_ARM_ARCH__ < 6 */
+
+/* We need run-time testing to determine if load_write_pc() should interwork. */
+extern bool load_write_pc_interworks;
+void __init test_load_write_pc_interworking(void);
+
+#endif
+
+static inline void __kprobes load_write_pc(long pcv, struct pt_regs *regs)
+{
+	if (load_write_pc_interworks)
+		bx_write_pc(pcv, regs);
+	else
+		regs->ARM_pc = pcv;
+}
+
+
+#if __LINUX_ARM_ARCH__ >= 7
+
+#define alu_write_pc_interworks true
+#define test_alu_write_pc_interworking()
+
+#elif __LINUX_ARM_ARCH__ <= 5
+
+/* Kernels built for <= ARMv5 should never run on >= ARMv6 hardware, so... */
+#define alu_write_pc_interworks false
+#define test_alu_write_pc_interworking()
+
+#else /* __LINUX_ARM_ARCH__ == 6 */
+
+/* We could be an ARMv6 binary on ARMv7 hardware so we need a run-time check. */
+extern bool alu_write_pc_interworks;
+void __init test_alu_write_pc_interworking(void);
+
+#endif /* __LINUX_ARM_ARCH__ == 6 */
+
+static inline void __kprobes alu_write_pc(long pcv, struct pt_regs *regs)
+{
+	if (alu_write_pc_interworks)
+		bx_write_pc(pcv, regs);
+	else
+		regs->ARM_pc = pcv;
+}
+
+
+/*
+ * Test if load/store instructions writeback the address register.
+ * if P (bit 24) == 0 or W (bit 21) == 1
+ */
+#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
+
+/*
+ * The following definitions and macros are used to build instruction
+ * decoding tables for use by probes_decode_insn.
+ *
+ * These tables are a concatenation of entries each of which consist of one of
+ * the decode_* structs. All of the fields in every type of decode structure
+ * are of the union type decode_item, therefore the entire decode table can be
+ * viewed as an array of these and declared like:
+ *
+ *	static const union decode_item table_name[] = {};
+ *
+ * In order to construct each entry in the table, macros are used to
+ * initialise a number of sequential decode_item values in a layout which
+ * matches the relevant struct. E.g. DECODE_SIMULATE initialise a struct
+ * decode_simulate by initialising four decode_item objects like this...
+ *
+ *	{.bits = _type},
+ *	{.bits = _mask},
+ *	{.bits = _value},
+ *	{.action = _handler},
+ *
+ * Initialising a specified member of the union means that the compiler
+ * will produce a warning if the argument is of an incorrect type.
+ *
+ * Below is a list of each of the macros used to initialise entries and a
+ * description of the action performed when that entry is matched to an
+ * instruction. A match is found when (instruction & mask) == value.
+ *
+ * DECODE_TABLE(mask, value, table)
+ *	Instruction decoding jumps to parsing the new sub-table 'table'.
+ *
+ * DECODE_CUSTOM(mask, value, decoder)
+ *	The value of 'decoder' is used as an index into the array of
+ *	action functions, and the retrieved decoder function is invoked
+ *	to complete decoding of the instruction.
+ *
+ * DECODE_SIMULATE(mask, value, handler)
+ *	The probes instruction handler is set to the value found by
+ *	indexing into the action array using the value of 'handler'. This
+ *	will be used to simulate the instruction when the probe is hit.
+ *	Decoding returns with INSN_GOOD_NO_SLOT.
+ *
+ * DECODE_EMULATE(mask, value, handler)
+ *	The probes instruction handler is set to the value found by
+ *	indexing into the action array using the value of 'handler'. This
+ *	will be used to emulate the instruction when the probe is hit. The
+ *	modified instruction (see below) is placed in the probes instruction
+ *	slot so it may be called by the emulation code. Decoding returns
+ *	with INSN_GOOD.
+ *
+ * DECODE_REJECT(mask, value)
+ *	Instruction decoding fails with INSN_REJECTED
+ *
+ * DECODE_OR(mask, value)
+ *	This allows the mask/value test of multiple table entries to be
+ *	logically ORed. Once an 'or' entry is matched the decoding action to
+ *	be performed is that of the next entry which isn't an 'or'. E.g.
+ *
+ *		DECODE_OR	(mask1, value1)
+ *		DECODE_OR	(mask2, value2)
+ *		DECODE_SIMULATE	(mask3, value3, simulation_handler)
+ *
+ *	This means that if any of the three mask/value pairs match the
+ *	instruction being decoded, then 'simulation_handler' will be used
+ *	for it.
+ *
+ * Both the SIMULATE and EMULATE macros have a second form which take an
+ * additional 'regs' argument.
+ *
+ *	DECODE_SIMULATEX(mask, value, handler, regs)
+ *	DECODE_EMULATEX	(mask, value, handler, regs)
+ *
+ * These are used to specify what kind of CPU register is encoded in each of the
+ * least significant 5 nibbles of the instruction being decoded. The regs value
+ * is specified using the REGS macro, this takes any of the REG_TYPE_* values
+ * from enum decode_reg_type as arguments; only the '*' part of the name is
+ * given. E.g.
+ *
+ *	REGS(0, ANY, NOPC, 0, ANY)
+ *
+ * This indicates an instruction is encoded like:
+ *
+ *	bits 19..16	ignore
+ *	bits 15..12	any register allowed here
+ *	bits 11.. 8	any register except PC allowed here
+ *	bits  7.. 4	ignore
+ *	bits  3.. 0	any register allowed here
+ *
+ * This register specification is checked after a decode table entry is found to
+ * match an instruction (through the mask/value test). Any invalid register then
+ * found in the instruction will cause decoding to fail with INSN_REJECTED. In
+ * the above example this would happen if bits 11..8 of the instruction were
+ * 1111, indicating R15 or PC.
+ *
+ * As well as checking for legal combinations of registers, this data is also
+ * used to modify the registers encoded in the instructions so that an
+ * emulation routines can use it. (See decode_regs() and INSN_NEW_BITS.)
+ *
+ * Here is a real example which matches ARM instructions of the form
+ * "AND <Rd>,<Rn>,<Rm>,<shift> <Rs>"
+ *
+ *	DECODE_EMULATEX	(0x0e000090, 0x00000010, PROBES_DATA_PROCESSING_REG,
+ *						 REGS(ANY, ANY, NOPC, 0, ANY)),
+ *						      ^    ^    ^        ^
+ *						      Rn   Rd   Rs       Rm
+ *
+ * Decoding the instruction "AND R4, R5, R6, ASL R15" will be rejected because
+ * Rs == R15
+ *
+ * Decoding the instruction "AND R4, R5, R6, ASL R7" will be accepted and the
+ * instruction will be modified to "AND R0, R2, R3, ASL R1" and then placed into
+ * the kprobes instruction slot. This can then be called later by the handler
+ * function emulate_rd12rn16rm0rs8_rwflags (a pointer to which is retrieved from
+ * the indicated slot in the action array), in order to simulate the instruction.
+ */
+
+enum decode_type {
+	DECODE_TYPE_END,
+	DECODE_TYPE_TABLE,
+	DECODE_TYPE_CUSTOM,
+	DECODE_TYPE_SIMULATE,
+	DECODE_TYPE_EMULATE,
+	DECODE_TYPE_OR,
+	DECODE_TYPE_REJECT,
+	NUM_DECODE_TYPES /* Must be last enum */
+};
+
+#define DECODE_TYPE_BITS	4
+#define DECODE_TYPE_MASK	((1 << DECODE_TYPE_BITS) - 1)
+
+enum decode_reg_type {
+	REG_TYPE_NONE = 0, /* Not a register, ignore */
+	REG_TYPE_ANY,	   /* Any register allowed */
+	REG_TYPE_SAMEAS16, /* Register should be same as that at bits 19..16 */
+	REG_TYPE_SP,	   /* Register must be SP */
+	REG_TYPE_PC,	   /* Register must be PC */
+	REG_TYPE_NOSP,	   /* Register must not be SP */
+	REG_TYPE_NOSPPC,   /* Register must not be SP or PC */
+	REG_TYPE_NOPC,	   /* Register must not be PC */
+	REG_TYPE_NOPCWB,   /* No PC if load/store write-back flag also set */
+
+	/* The following types are used when the encoding for PC indicates
+	 * another instruction form. This distiction only matters for test
+	 * case coverage checks.
+	 */
+	REG_TYPE_NOPCX,	   /* Register must not be PC */
+	REG_TYPE_NOSPPCX,  /* Register must not be SP or PC */
+
+	/* Alias to allow '0' arg to be used in REGS macro. */
+	REG_TYPE_0 = REG_TYPE_NONE
+};
+
+#define REGS(r16, r12, r8, r4, r0)	\
+	(((REG_TYPE_##r16) << 16) +	\
+	((REG_TYPE_##r12) << 12) +	\
+	((REG_TYPE_##r8) << 8) +	\
+	((REG_TYPE_##r4) << 4) +	\
+	(REG_TYPE_##r0))
+
+union decode_item {
+	u32			bits;
+	const union decode_item	*table;
+	int			action;
+};
+
+struct decode_header;
+typedef enum probes_insn (probes_custom_decode_t)(probes_opcode_t,
+						  struct arch_probes_insn *,
+						  const struct decode_header *);
+
+union decode_action {
+	probes_insn_handler_t	*handler;
+	probes_custom_decode_t	*decoder;
+};
+
+typedef enum probes_insn (probes_check_t)(probes_opcode_t,
+					   struct arch_probes_insn *,
+					   const struct decode_header *);
+
+struct decode_checker {
+	probes_check_t	*checker;
+};
+
+#define DECODE_END			\
+	{.bits = DECODE_TYPE_END}
+
+
+struct decode_header {
+	union decode_item	type_regs;
+	union decode_item	mask;
+	union decode_item	value;
+};
+
+#define DECODE_HEADER(_type, _mask, _value, _regs)		\
+	{.bits = (_type) | ((_regs) << DECODE_TYPE_BITS)},	\
+	{.bits = (_mask)},					\
+	{.bits = (_value)}
+
+
+struct decode_table {
+	struct decode_header	header;
+	union decode_item	table;
+};
+
+#define DECODE_TABLE(_mask, _value, _table)			\
+	DECODE_HEADER(DECODE_TYPE_TABLE, _mask, _value, 0),	\
+	{.table = (_table)}
+
+
+struct decode_custom {
+	struct decode_header	header;
+	union decode_item	decoder;
+};
+
+#define DECODE_CUSTOM(_mask, _value, _decoder)			\
+	DECODE_HEADER(DECODE_TYPE_CUSTOM, _mask, _value, 0),	\
+	{.action = (_decoder)}
+
+
+struct decode_simulate {
+	struct decode_header	header;
+	union decode_item	handler;
+};
+
+#define DECODE_SIMULATEX(_mask, _value, _handler, _regs)		\
+	DECODE_HEADER(DECODE_TYPE_SIMULATE, _mask, _value, _regs),	\
+	{.action = (_handler)}
+
+#define DECODE_SIMULATE(_mask, _value, _handler)	\
+	DECODE_SIMULATEX(_mask, _value, _handler, 0)
+
+
+struct decode_emulate {
+	struct decode_header	header;
+	union decode_item	handler;
+};
+
+#define DECODE_EMULATEX(_mask, _value, _handler, _regs)			\
+	DECODE_HEADER(DECODE_TYPE_EMULATE, _mask, _value, _regs),	\
+	{.action = (_handler)}
+
+#define DECODE_EMULATE(_mask, _value, _handler)		\
+	DECODE_EMULATEX(_mask, _value, _handler, 0)
+
+
+struct decode_or {
+	struct decode_header	header;
+};
+
+#define DECODE_OR(_mask, _value)				\
+	DECODE_HEADER(DECODE_TYPE_OR, _mask, _value, 0)
+
+enum probes_insn {
+	INSN_REJECTED,
+	INSN_GOOD,
+	INSN_GOOD_NO_SLOT
+};
+
+struct decode_reject {
+	struct decode_header	header;
+};
+
+#define DECODE_REJECT(_mask, _value)				\
+	DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+
+probes_insn_handler_t probes_simulate_nop;
+probes_insn_handler_t probes_emulate_none;
+
+int __kprobes
+probes_decode_insn(probes_opcode_t insn, struct arch_probes_insn *asi,
+		const union decode_item *table, bool thumb, bool emulate,
+		const union decode_action *actions,
+		const struct decode_checker **checkers);
+
+#endif