Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 207 insertions, 0 deletions

diff --git a/arch/arm/vdso/vdsomunge.c b/arch/arm/vdso/vdsomunge.c
new file mode 100644
index 000000000..1977869d8
--- /dev/null
+++ b/arch/arm/vdso/vdsomunge.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2015 Mentor Graphics Corporation.
+ *
+ * vdsomunge - Host program which produces a shared object
+ * architecturally specified to be usable by both soft- and hard-float
+ * programs.
+ *
+ * The Procedure Call Standard for the ARM Architecture (ARM IHI
+ * 0042E) says:
+ *
+ *	6.4.1 VFP and Base Standard Compatibility
+ *
+ *	Code compiled for the VFP calling standard is compatible with
+ *	the base standard (and vice-versa) if no floating-point or
+ *	containerized vector arguments or results are used.
+ *
+ * And ELF for the ARM Architecture (ARM IHI 0044E) (Table 4-2) says:
+ *
+ *	If both EF_ARM_ABI_FLOAT_XXXX bits are clear, conformance to the
+ *	base procedure-call standard is implied.
+ *
+ * The VDSO is built with -msoft-float, as with the rest of the ARM
+ * kernel, and uses no floating point arguments or results.  The build
+ * process will produce a shared object that may or may not have the
+ * EF_ARM_ABI_FLOAT_SOFT flag set (it seems to depend on the binutils
+ * version; binutils starting with 2.24 appears to set it).  The
+ * EF_ARM_ABI_FLOAT_HARD flag should definitely not be set, and this
+ * program will error out if it is.
+ *
+ * If the soft-float flag is set, this program clears it.  That's all
+ * it does.
+ */
+
+#include <elf.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#define swab16(x) \
+	((((x) & 0x00ff) << 8) | \
+	 (((x) & 0xff00) >> 8))
+
+#define swab32(x) \
+	((((x) & 0x000000ff) << 24) | \
+	 (((x) & 0x0000ff00) <<  8) | \
+	 (((x) & 0x00ff0000) >>  8) | \
+	 (((x) & 0xff000000) >> 24))
+
+#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+#define HOST_ORDER ELFDATA2LSB
+#elif __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define HOST_ORDER ELFDATA2MSB
+#endif
+
+/* Some of the ELF constants we'd like to use were added to <elf.h>
+ * relatively recently.
+ */
+#ifndef EF_ARM_EABI_VER5
+#define EF_ARM_EABI_VER5 0x05000000
+#endif
+
+#ifndef EF_ARM_ABI_FLOAT_SOFT
+#define EF_ARM_ABI_FLOAT_SOFT 0x200
+#endif
+
+#ifndef EF_ARM_ABI_FLOAT_HARD
+#define EF_ARM_ABI_FLOAT_HARD 0x400
+#endif
+
+static int failed;
+static const char *argv0;
+static const char *outfile;
+
+static void fail(const char *fmt, ...)
+{
+	va_list ap;
+
+	failed = 1;
+	fprintf(stderr, "%s: ", argv0);
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+	exit(EXIT_FAILURE);
+}
+
+static void cleanup(void)
+{
+	if (failed && outfile != NULL)
+		unlink(outfile);
+}
+
+static Elf32_Word read_elf_word(Elf32_Word word, bool swap)
+{
+	return swap ? swab32(word) : word;
+}
+
+static Elf32_Half read_elf_half(Elf32_Half half, bool swap)
+{
+	return swap ? swab16(half) : half;
+}
+
+static void write_elf_word(Elf32_Word val, Elf32_Word *dst, bool swap)
+{
+	*dst = swap ? swab32(val) : val;
+}
+
+int main(int argc, char **argv)
+{
+	const Elf32_Ehdr *inhdr;
+	bool clear_soft_float;
+	const char *infile;
+	Elf32_Word e_flags;
+	const void *inbuf;
+	struct stat stat;
+	void *outbuf;
+	bool swap;
+	int outfd;
+	int infd;
+
+	atexit(cleanup);
+	argv0 = argv[0];
+
+	if (argc != 3)
+		fail("Usage: %s [infile] [outfile]\n", argv[0]);
+
+	infile = argv[1];
+	outfile = argv[2];
+
+	infd = open(infile, O_RDONLY);
+	if (infd < 0)
+		fail("Cannot open %s: %s\n", infile, strerror(errno));
+
+	if (fstat(infd, &stat) != 0)
+		fail("Failed stat for %s: %s\n", infile, strerror(errno));
+
+	inbuf = mmap(NULL, stat.st_size, PROT_READ, MAP_PRIVATE, infd, 0);
+	if (inbuf == MAP_FAILED)
+		fail("Failed to map %s: %s\n", infile, strerror(errno));
+
+	close(infd);
+
+	inhdr = inbuf;
+
+	if (memcmp(&inhdr->e_ident, ELFMAG, SELFMAG) != 0)
+		fail("Not an ELF file\n");
+
+	if (inhdr->e_ident[EI_CLASS] != ELFCLASS32)
+		fail("Unsupported ELF class\n");
+
+	swap = inhdr->e_ident[EI_DATA] != HOST_ORDER;
+
+	if (read_elf_half(inhdr->e_type, swap) != ET_DYN)
+		fail("Not a shared object\n");
+
+	if (read_elf_half(inhdr->e_machine, swap) != EM_ARM)
+		fail("Unsupported architecture %#x\n", inhdr->e_machine);
+
+	e_flags = read_elf_word(inhdr->e_flags, swap);
+
+	if (EF_ARM_EABI_VERSION(e_flags) != EF_ARM_EABI_VER5) {
+		fail("Unsupported EABI version %#x\n",
+		     EF_ARM_EABI_VERSION(e_flags));
+	}
+
+	if (e_flags & EF_ARM_ABI_FLOAT_HARD)
+		fail("Unexpected hard-float flag set in e_flags\n");
+
+	clear_soft_float = !!(e_flags & EF_ARM_ABI_FLOAT_SOFT);
+
+	outfd = open(outfile, O_RDWR | O_CREAT | O_TRUNC, S_IRUSR | S_IWUSR);
+	if (outfd < 0)
+		fail("Cannot open %s: %s\n", outfile, strerror(errno));
+
+	if (ftruncate(outfd, stat.st_size) != 0)
+		fail("Cannot truncate %s: %s\n", outfile, strerror(errno));
+
+	outbuf = mmap(NULL, stat.st_size, PROT_READ | PROT_WRITE, MAP_SHARED,
+		      outfd, 0);
+	if (outbuf == MAP_FAILED)
+		fail("Failed to map %s: %s\n", outfile, strerror(errno));
+
+	close(outfd);
+
+	memcpy(outbuf, inbuf, stat.st_size);
+
+	if (clear_soft_float) {
+		Elf32_Ehdr *outhdr;
+
+		outhdr = outbuf;
+		e_flags &= ~EF_ARM_ABI_FLOAT_SOFT;
+		write_elf_word(e_flags, &outhdr->e_flags, swap);
+	}
+
+	if (msync(outbuf, stat.st_size, MS_SYNC) != 0)
+		fail("Failed to sync %s: %s\n", outfile, strerror(errno));
+
+	return EXIT_SUCCESS;
+}