Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 326 insertions, 0 deletions

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
new file mode 100644
index 000000000..26c4f61ec
--- /dev/null
+++ b/arch/arm/vfp/vfphw.S
@@ -0,0 +1,326 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/vfp/vfphw.S
+ *
+ *  Copyright (C) 2004 ARM Limited.
+ *  Written by Deep Blue Solutions Limited.
+ *
+ * This code is called from the kernel's undefined instruction trap.
+ * r9 holds the return address for successful handling.
+ * lr holds the return address for unrecognised instructions.
+ * r10 points at the start of the private FP workspace in the thread structure
+ * sp points to a struct pt_regs (as defined in include/asm/proc/ptrace.h)
+ */
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/vfpmacros.h>
+#include <linux/kern_levels.h>
+#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+
+	.macro	DBGSTR, str
+#ifdef DEBUG
+	stmfd	sp!, {r0-r3, ip, lr}
+	ldr	r0, =1f
+	bl	_printk
+	ldmfd	sp!, {r0-r3, ip, lr}
+
+	.pushsection .rodata, "a"
+1:	.ascii	KERN_DEBUG "VFP: \str\n"
+	.byte	0
+	.previous
+#endif
+	.endm
+
+	.macro  DBGSTR1, str, arg
+#ifdef DEBUG
+	stmfd	sp!, {r0-r3, ip, lr}
+	mov	r1, \arg
+	ldr	r0, =1f
+	bl	_printk
+	ldmfd	sp!, {r0-r3, ip, lr}
+
+	.pushsection .rodata, "a"
+1:	.ascii	KERN_DEBUG "VFP: \str\n"
+	.byte	0
+	.previous
+#endif
+	.endm
+
+	.macro  DBGSTR3, str, arg1, arg2, arg3
+#ifdef DEBUG
+	stmfd	sp!, {r0-r3, ip, lr}
+	mov	r3, \arg3
+	mov	r2, \arg2
+	mov	r1, \arg1
+	ldr	r0, =1f
+	bl	_printk
+	ldmfd	sp!, {r0-r3, ip, lr}
+
+	.pushsection .rodata, "a"
+1:	.ascii	KERN_DEBUG "VFP: \str\n"
+	.byte	0
+	.previous
+#endif
+	.endm
+
+
+@ VFP hardware support entry point.
+@
+@  r0  = instruction opcode (32-bit ARM or two 16-bit Thumb)
+@  r2  = PC value to resume execution after successful emulation
+@  r9  = normal "successful" return address
+@  r10 = vfp_state union
+@  r11 = CPU number
+@  lr  = unrecognised instruction return address
+@  IRQs enabled.
+ENTRY(vfp_support_entry)
+	DBGSTR3	"instr %08x pc %08x state %p", r0, r2, r10
+
+	.fpu	vfpv2
+	VFPFMRX	r1, FPEXC		@ Is the VFP enabled?
+	DBGSTR1	"fpexc %08x", r1
+	tst	r1, #FPEXC_EN
+	bne	look_for_VFP_exceptions	@ VFP is already enabled
+
+	DBGSTR1 "enable %x", r10
+	ldr	r3, vfp_current_hw_state_address
+	orr	r1, r1, #FPEXC_EN	@ user FPEXC has the enable bit set
+	ldr	r4, [r3, r11, lsl #2]	@ vfp_current_hw_state pointer
+	bic	r5, r1, #FPEXC_EX	@ make sure exceptions are disabled
+	cmp	r4, r10			@ this thread owns the hw context?
+#ifndef CONFIG_SMP
+	@ For UP, checking that this thread owns the hw context is
+	@ sufficient to determine that the hardware state is valid.
+	beq	vfp_hw_state_valid
+
+	@ On UP, we lazily save the VFP context.  As a different
+	@ thread wants ownership of the VFP hardware, save the old
+	@ state if there was a previous (valid) owner.
+
+	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
+					@ exceptions, so we can get at the
+					@ rest of it
+
+	DBGSTR1	"save old state %p", r4
+	cmp	r4, #0			@ if the vfp_current_hw_state is NULL
+	beq	vfp_reload_hw		@ then the hw state needs reloading
+	VFPFSTMIA r4, r5		@ save the working registers
+	VFPFMRX	r5, FPSCR		@ current status
+#ifndef CONFIG_CPU_FEROCEON
+	tst	r1, #FPEXC_EX		@ is there additional state to save?
+	beq	1f
+	VFPFMRX	r6, FPINST		@ FPINST (only if FPEXC.EX is set)
+	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
+	beq	1f
+	VFPFMRX	r8, FPINST2		@ FPINST2 if needed (and present)
+1:
+#endif
+	stmia	r4, {r1, r5, r6, r8}	@ save FPEXC, FPSCR, FPINST, FPINST2
+vfp_reload_hw:
+
+#else
+	@ For SMP, if this thread does not own the hw context, then we
+	@ need to reload it.  No need to save the old state as on SMP,
+	@ we always save the state when we switch away from a thread.
+	bne	vfp_reload_hw
+
+	@ This thread has ownership of the current hardware context.
+	@ However, it may have been migrated to another CPU, in which
+	@ case the saved state is newer than the hardware context.
+	@ Check this by looking at the CPU number which the state was
+	@ last loaded onto.
+	ldr	ip, [r10, #VFP_CPU]
+	teq	ip, r11
+	beq	vfp_hw_state_valid
+
+vfp_reload_hw:
+	@ We're loading this threads state into the VFP hardware. Update
+	@ the CPU number which contains the most up to date VFP context.
+	str	r11, [r10, #VFP_CPU]
+
+	VFPFMXR	FPEXC, r5		@ enable VFP, disable any pending
+					@ exceptions, so we can get at the
+					@ rest of it
+#endif
+
+	DBGSTR1	"load state %p", r10
+	str	r10, [r3, r11, lsl #2]	@ update the vfp_current_hw_state pointer
+					@ Load the saved state back into the VFP
+	VFPFLDMIA r10, r5		@ reload the working registers while
+					@ FPEXC is in a safe state
+	ldmia	r10, {r1, r5, r6, r8}	@ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
+	tst	r1, #FPEXC_EX		@ is there additional state to restore?
+	beq	1f
+	VFPFMXR	FPINST, r6		@ restore FPINST (only if FPEXC.EX is set)
+	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to write?
+	beq	1f
+	VFPFMXR	FPINST2, r8		@ FPINST2 if needed (and present)
+1:
+#endif
+	VFPFMXR	FPSCR, r5		@ restore status
+
+@ The context stored in the VFP hardware is up to date with this thread
+vfp_hw_state_valid:
+	tst	r1, #FPEXC_EX
+	bne	process_exception	@ might as well handle the pending
+					@ exception before retrying branch
+					@ out before setting an FPEXC that
+					@ stops us reading stuff
+	VFPFMXR	FPEXC, r1		@ Restore FPEXC last
+	sub	r2, r2, #4		@ Retry current instruction - if Thumb
+	str	r2, [sp, #S_PC]		@ mode it's two 16-bit instructions,
+					@ else it's one 32-bit instruction, so
+					@ always subtract 4 from the following
+					@ instruction address.
+	local_bh_enable_ti r10, r4
+	ret	r9			@ we think we have handled things
+
+
+look_for_VFP_exceptions:
+	@ Check for synchronous or asynchronous exception
+	tst	r1, #FPEXC_EX | FPEXC_DEX
+	bne	process_exception
+	@ On some implementations of the VFP subarch 1, setting FPSCR.IXE
+	@ causes all the CDP instructions to be bounced synchronously without
+	@ setting the FPEXC.EX bit
+	VFPFMRX	r5, FPSCR
+	tst	r5, #FPSCR_IXE
+	bne	process_exception
+
+	tst	r5, #FPSCR_LENGTH_MASK
+	beq	skip
+	orr	r1, r1, #FPEXC_DEX
+	b	process_exception
+skip:
+
+	@ Fall into hand on to next handler - appropriate coproc instr
+	@ not recognised by VFP
+
+	DBGSTR	"not VFP"
+	local_bh_enable_ti r10, r4
+	ret	lr
+
+process_exception:
+	DBGSTR	"bounce"
+	mov	r2, sp			@ nothing stacked - regdump is at TOS
+	mov	lr, r9			@ setup for a return to the user code.
+
+	@ Now call the C code to package up the bounce to the support code
+	@   r0 holds the trigger instruction
+	@   r1 holds the FPEXC value
+	@   r2 pointer to register dump
+	b	VFP_bounce		@ we have handled this - the support
+					@ code will raise an exception if
+					@ required. If not, the user code will
+					@ retry the faulted instruction
+ENDPROC(vfp_support_entry)
+
+ENTRY(vfp_save_state)
+	@ Save the current VFP state
+	@ r0 - save location
+	@ r1 - FPEXC
+	DBGSTR1	"save VFP state %p", r0
+	VFPFSTMIA r0, r2		@ save the working registers
+	VFPFMRX	r2, FPSCR		@ current status
+	tst	r1, #FPEXC_EX		@ is there additional state to save?
+	beq	1f
+	VFPFMRX	r3, FPINST		@ FPINST (only if FPEXC.EX is set)
+	tst	r1, #FPEXC_FP2V		@ is there an FPINST2 to read?
+	beq	1f
+	VFPFMRX	r12, FPINST2		@ FPINST2 if needed (and present)
+1:
+	stmia	r0, {r1, r2, r3, r12}	@ save FPEXC, FPSCR, FPINST, FPINST2
+	ret	lr
+ENDPROC(vfp_save_state)
+
+	.align
+vfp_current_hw_state_address:
+	.word	vfp_current_hw_state
+
+	.macro	tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+	adr	\tmp, 1f
+	add	\tmp, \tmp, \base, lsl \shift
+	ret	\tmp
+#else
+	add	pc, pc, \base, lsl \shift
+	mov	r0, r0
+#endif
+1:
+	.endm
+
+ENTRY(vfp_get_float)
+	tbl_branch r0, r3, #3
+	.fpu	vfpv2
+	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+1:	vmov	r0, s\dr
+	ret	lr
+	.org	1b + 8
+	.endr
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	r0, s\dr
+	ret	lr
+	.org	1b + 8
+	.endr
+ENDPROC(vfp_get_float)
+
+ENTRY(vfp_put_float)
+	tbl_branch r1, r3, #3
+	.fpu	vfpv2
+	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+1:	vmov	s\dr, r0
+	ret	lr
+	.org	1b + 8
+	.endr
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	s\dr, r0
+	ret	lr
+	.org	1b + 8
+	.endr
+ENDPROC(vfp_put_float)
+
+ENTRY(vfp_get_double)
+	tbl_branch r0, r3, #3
+	.fpu	vfpv2
+	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+1:	vmov	r0, r1, d\dr
+	ret	lr
+	.org	1b + 8
+	.endr
+#ifdef CONFIG_VFPv3
+	@ d16 - d31 registers
+	.fpu	vfpv3
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	r0, r1, d\dr
+	ret	lr
+	.org	1b + 8
+	.endr
+#endif
+
+	@ virtual register 16 (or 32 if VFPv3) for compare with zero
+	mov	r0, #0
+	mov	r1, #0
+	ret	lr
+ENDPROC(vfp_get_double)
+
+ENTRY(vfp_put_double)
+	tbl_branch r2, r3, #3
+	.fpu	vfpv2
+	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
+1:	vmov	d\dr, r0, r1
+	ret	lr
+	.org	1b + 8
+	.endr
+#ifdef CONFIG_VFPv3
+	.fpu	vfpv3
+	@ d16 - d31 registers
+	.irp	dr,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
+1:	vmov	d\dr, r0, r1
+	ret	lr
+	.org	1b + 8
+	.endr
+#endif
+ENDPROC(vfp_put_double)