Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 789 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
new file mode 100644
index 000000000..886b93c58
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -0,0 +1,789 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3670 SoC
+ *
+ * Copyright (C) 2016, HiSilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/hi3670-clock.h>
+
+/ {
+	compatible = "hisilicon,hi3670";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			compatible = "arm,cortex-a73";
+			device_type = "cpu";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	gic: interrupt-controller@e82b0000 {
+		compatible = "arm,gic-400";
+		reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+		      <0x0 0xe82b2000 0 0x2000>, /* GICC */
+		      <0x0 0xe82b4000 0 0x2000>, /* GICH */
+		      <0x0 0xe82b6000 0 0x2000>; /* GICV */
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+					 IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-controller;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <1920000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		crg_ctrl: crg_ctrl@fff35000 {
+			compatible = "hisilicon,hi3670-crgctrl", "syscon";
+			reg = <0x0 0xfff35000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		crg_rst: crg_rst_controller {
+			compatible = "hisilicon,hi3670-reset",
+				     "hisilicon,hi3660-reset";
+			#reset-cells = <2>;
+			hisi,rst-syscon = <&crg_ctrl>;
+		};
+
+		pctrl: pctrl@e8a09000 {
+			compatible = "hisilicon,hi3670-pctrl", "syscon";
+			reg = <0x0 0xe8a09000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pmuctrl: crg_ctrl@fff34000 {
+			compatible = "hisilicon,hi3670-pmuctrl", "syscon";
+			reg = <0x0 0xfff34000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sctrl: sctrl@fff0a000 {
+			compatible = "hisilicon,hi3670-sctrl", "syscon";
+			reg = <0x0 0xfff0a000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu: iomcu@ffd7e000 {
+			compatible = "hisilicon,hi3670-iomcu", "syscon";
+			reg = <0x0 0xffd7e000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		media1_crg: media1_crgctrl@e87ff000 {
+			compatible = "hisilicon,hi3670-media1-crg", "syscon";
+			reg = <0x0 0xe87ff000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		media2_crg: media2_crgctrl@e8900000 {
+			compatible = "hisilicon,hi3670-media2-crg","syscon";
+			reg = <0x0 0xe8900000 0x0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		iomcu_rst: reset {
+			compatible = "hisilicon,hi3660-reset";
+			hisi,rst-syscon = <&iomcu>;
+			#reset-cells = <2>;
+		};
+
+		uart0: serial@fdf02000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf02000 0x0 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART0>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+			status = "disabled";
+		};
+
+		uart1: serial@fdf00000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf00000 0x0 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART1>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart2: serial@fdf03000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf03000 0x0 0x1000>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART2>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+			status = "disabled";
+		};
+
+		uart3: serial@ffd74000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xffd74000 0x0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART3>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+			status = "disabled";
+		};
+
+		uart4: serial@fdf01000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf01000 0x0 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART4>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+			status = "disabled";
+		};
+
+		uart5: serial@fdf05000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfdf05000 0x0 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UART5>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		uart6: serial@fff32000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x0 0xfff32000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_UART6>,
+				 <&crg_ctrl HI3670_PCLK>;
+			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart6_pmx_func &uart6_cfg_func>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e8a0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 0 1 &pmx0 3 1 5>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@e8a0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@e8a0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 6 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio3: gpio@e8a0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0e000 0x0 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 13 4 &pmx0 7 17 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio4: gpio@e8a0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a0f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 18 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio5: gpio@e8a10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 26 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio6: gpio@e8a11000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a11000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 1 34 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio7: gpio@e8a12000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a12000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 41 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO7>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio8: gpio@e8a13000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a13000 0x0 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 49 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO8>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio9: gpio@e8a14000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a14000 0x0 0x1000>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 57 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO9>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio10: gpio@e8a15000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a15000 0x0 0x1000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 65 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO10>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio11: gpio@e8a16000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a16000 0x0 0x1000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 73 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO11>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio12: gpio@e8a17000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a17000 0x0 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx0 0 81 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO12>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio13: gpio@e8a18000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a18000 0x0 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO13>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio14: gpio@e8a19000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a19000 0x0 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO14>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio15: gpio@e8a1a000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1a000 0x0 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO15>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio16: gpio@e8a1b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx5 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO16>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio17: gpio@e8a1c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx5 0 8 2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO17>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio18: gpio@fff28000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff28000 0x0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 4 42 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_GPIO18>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio19: gpio@fff29000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff29000 0x0 0x1000>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 0 61 2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_GPIO19>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio20: gpio@e8a1f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a1f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx7 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO20>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio21: gpio@e8a20000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xe8a20000 0x0 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx7 0 8 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&crg_ctrl HI3670_PCLK_GPIO21>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio22: gpio@fff0b000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO176 */
+			gpio-ranges = <&pmx1 2 0 6>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO0>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio23: gpio@fff0c000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO184 */
+			gpio-ranges = <&pmx1 0 6 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO1>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio24: gpio@fff0d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO192 */
+			gpio-ranges = <&pmx1 0 14 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO2>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio25: gpio@fff0e000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0e000 0x0 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO200 */
+			gpio-ranges = <&pmx1 0 22 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO3>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio26: gpio@fff0f000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff0f000 0x0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO208 */
+			gpio-ranges = <&pmx1 0 30 1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO4>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio27: gpio@fff10000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff10000 0x0 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			/* GPIO216 */
+			gpio-ranges = <&pmx1 4 31 4>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO5>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio28: gpio@fff1d000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x0 0xfff1d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pmx1 1 35 7>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&sctrl HI3670_PCLK_AO_GPIO6>;
+			clock-names = "apb_pclk";
+		};
+
+		/* UFS */
+		ufs: ufs@ff3c0000 {
+			compatible = "hisilicon,hi3670-ufs", "jedec,ufs-2.1";
+			/* 0: HCI standard */
+			/* 1: UFS SYS CTRL */
+			reg = <0x0 0xff3c0000 0x0 0x1000>,
+				<0x0 0xff3e0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>,
+				 <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>;
+			clock-names = "ref_clk", "phy_clk";
+			freq-table-hz = <0 0>,
+					<0 0>;
+			/* offset: 0x84; bit: 12 */
+			resets = <&crg_rst 0x84 12>;
+			reset-names = "rst";
+		};
+
+		/* SD */
+		dwmmc1: dwmmc1@ff37f000 {
+			compatible = "hisilicon,hi3670-dw-mshc",
+				     "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xff37f000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_SD>,
+				<&crg_ctrl HI3670_HCLK_GATE_SD>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 18>;
+			reset-names = "reset";
+			hisilicon,peripheral-syscon = <&sctrl>;
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* SDIO */
+		dwmmc2: dwmmc2@fc183000 {
+			compatible = "hisilicon,hi3670-dw-mshc",
+				     "hisilicon,hi3660-dw-mshc";
+			reg = <0x0 0xfc183000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_SDIO>,
+				<&crg_ctrl HI3670_HCLK_GATE_SDIO>;
+			clock-names = "ciu", "biu";
+			clock-frequency = <3200000>;
+			resets = <&crg_rst 0x94 20>;
+			reset-names = "reset";
+			card-detect-delay = <200>;
+			status = "disabled";
+		};
+
+		/* I2C */
+		i2c0: i2c@ffd71000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd71000 0x0 0x1000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C0>;
+			resets = <&iomcu_rst 0x20 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@ffd72000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd72000 0x0 0x1000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C1>;
+			resets = <&iomcu_rst 0x20 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@ffd73000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xffd73000 0x0 0x1000>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&iomcu HI3670_CLK_GATE_I2C2>;
+			resets = <&iomcu_rst 0x20 5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@fdf0c000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_I2C3>;
+			resets = <&crg_rst 0x78 7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pmx_func &i2c3_cfg_func>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@fdf0d000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0xfdf0d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-frequency = <400000>;
+			clocks = <&crg_ctrl HI3670_CLK_GATE_I2C4>;
+			resets = <&crg_rst 0x78 27>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
+			status = "disabled";
+		};
+	};
+};