Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 419 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
new file mode 100644
index 000000000..5dfa31840
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_conf: scm-conf@40f00000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x0 0x40f00000 0x0 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+		phy_gmii_sel: phy@4040 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4040 0x4>;
+			#phy-cells = <1>;
+		};
+	};
+
+	/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+	mcu_timerio_input: pinctrl@40f04200 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04200 0x0 0x10>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000101>;
+	};
+
+	/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+	mcu_timerio_output: pinctrl@40f04280 {
+		compatible = "pinctrl-single";
+		reg = <0x0 0x40f04280 0x0 0x8>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x00000003>;
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x80000>;
+		ranges = <0x0 0x00 0x41c00000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	mcu_i2c0: i2c@40b00000 {
+		compatible = "ti,am654-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 564 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 114 1>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
+	};
+
+	mcu_spi0: spi@40300000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40300000 0x0 0x400>;
+		interrupts = <GIC_SPI 560 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 142 1>;
+		power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mcu_spi1: spi@40310000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40310000 0x0 0x400>;
+		interrupts = <GIC_SPI 561 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 143 1>;
+		power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	mcu_spi2: spi@40320000 {
+		compatible = "ti,am654-mcspi","ti,omap4-mcspi";
+		reg = <0x0 0x40320000 0x0 0x400>;
+		interrupts = <GIC_SPI 562 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 144 1>;
+		power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	tscadc0: tscadc@40200000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40200000 0x0 0x1000>;
+		interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 0 2>;
+		assigned-clocks = <&k3_clks 0 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&mcu_udmap 0x7100>,
+			<&mcu_udmap 0x7101 >;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	tscadc1: tscadc@40210000 {
+		compatible = "ti,am654-tscadc", "ti,am3359-tscadc";
+		reg = <0x0 0x40210000 0x0 0x1000>;
+		interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&k3_clks 1 2>;
+		assigned-clocks = <&k3_clks 1 2>;
+		assigned-clock-rates = <60000000>;
+		clock-names = "fck";
+		dmas = <&mcu_udmap 0x7102>,
+			<&mcu_udmap 0x7103>;
+		dma-names = "fifo0", "fifo1";
+
+		adc {
+			#io-channel-cells = <1>;
+			compatible = "ti,am654-adc", "ti,am3359-adc";
+		};
+	};
+
+	/*
+	 * The MCU domain timer interrupts are routed only to the ESM module,
+	 * and not currently available for Linux. The MCU domain timers are
+	 * of limited use without interrupts, and likely reserved by the ESM.
+	 */
+	mcu_timer0: timer@40400000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40400000 0x00 0x400>;
+		clocks = <&k3_clks 35 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer1: timer@40410000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40410000 0x00 0x400>;
+		clocks = <&k3_clks 36 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer2: timer@40420000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40420000 0x00 0x400>;
+		clocks = <&k3_clks 37 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_timer3: timer@40430000 {
+		compatible = "ti,am654-timer";
+		reg = <0x00 0x40430000 0x00 0x400>;
+		clocks = <&k3_clks 38 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+		ti,timer-pwm;
+		status = "reserved";
+	};
+
+	mcu_navss: bus@28380000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
+		dma-coherent;
+		dma-ranges;
+
+		ti,sci-dev-id = <119>;
+
+		mcu_ringacc: ringacc@2b800000 {
+			compatible = "ti,am654-navss-ringacc";
+			reg =	<0x0 0x2b800000 0x0 0x400000>,
+				<0x0 0x2b000000 0x0 0x400000>,
+				<0x0 0x28590000 0x0 0x100>,
+				<0x0 0x2a500000 0x0 0x40000>;
+			reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+			ti,num-rings = <286>;
+			ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <195>;
+			msi-parent = <&inta_main_udmass>;
+		};
+
+		mcu_udmap: dma-controller@285c0000 {
+			compatible = "ti,am654-navss-mcu-udmap";
+			reg =	<0x0 0x285c0000 0x0 0x100>,
+				<0x0 0x2a800000 0x0 0x40000>,
+				<0x0 0x2aa00000 0x0 0x40000>;
+			reg-names = "gcfg", "rchanrt", "tchanrt";
+			msi-parent = <&inta_main_udmass>;
+			#dma-cells = <1>;
+
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <194>;
+			ti,ringacc = <&mcu_ringacc>;
+
+			ti,sci-rm-range-tchan = <0xf>, /* TX_HCHAN */
+						<0xd>; /* TX_CHAN */
+			ti,sci-rm-range-rchan = <0xb>, /* RX_HCHAN */
+						<0xa>; /* RX_CHAN */
+			ti,sci-rm-range-rflow = <0x0>; /* GP RFLOW */
+		};
+	};
+
+	m_can0: mcan@40528000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40528000 0x0 0x400>,
+		      <0x0 0x40500000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	m_can1: mcan@40568000 {
+		compatible = "bosch,m_can";
+		reg = <0x0 0x40568000 0x0 0x400>,
+		      <0x0 0x40540000 0x0 0x4400>;
+		reg-names = "m_can", "message_ram";
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
+		clock-names = "hclk", "cclk";
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "int0", "int1";
+		bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+		status = "disabled";
+	};
+
+	fss: fss@47000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ospi0: spi@47040000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47040000 0x0 0x100>,
+				<0x5 0x00000000 0x1 0x0000000>;
+			interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 248 0>;
+			assigned-clocks = <&k3_clks 248 0>;
+			assigned-clock-parents = <&k3_clks 248 2>;
+			assigned-clock-rates = <166666666>;
+			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ospi1: spi@47050000 {
+			compatible = "ti,am654-ospi", "cdns,qspi-nor";
+			reg = <0x0 0x47050000 0x0 0x100>,
+				<0x7 0x00000000 0x1 0x00000000>;
+			interrupts = <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
+			cdns,fifo-depth = <256>;
+			cdns,fifo-width = <4>;
+			cdns,trigger-address = <0x0>;
+			clocks = <&k3_clks 249 6>;
+			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	mcu_cpsw: ethernet@46000000 {
+		compatible = "ti,am654-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x0 0x46000000 0x0 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 5 10>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&mcu_udmap 0xf000>,
+		       <&mcu_udmap 0xf001>,
+		       <&mcu_udmap 0xf002>,
+		       <&mcu_udmap 0xf003>,
+		       <&mcu_udmap 0xf004>,
+		       <&mcu_udmap 0xf005>,
+		       <&mcu_udmap 0xf006>,
+		       <&mcu_udmap 0xf007>,
+		       <&mcu_udmap 0x7000>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpsw_port1: port@1 {
+				reg = <1>;
+				ti,mac-only;
+				label = "port1";
+				ti,syscon-efuse = <&mcu_conf 0x200>;
+				phys = <&phy_gmii_sel 1>;
+			};
+		};
+
+		davinci_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+			reg = <0x0 0xf00 0x0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 5 10>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+			status = "disabled";
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x0 0x3d000 0x0 0x400>;
+			clocks = <&mcu_cpsw_cpts_mux>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+
+			mcu_cpsw_cpts_mux: refclk-mux {
+				#clock-cells = <0>;
+				clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+					<&k3_clks 118 6>, <&k3_clks 118 3>,
+					<&k3_clks 118 8>, <&k3_clks 118 14>,
+					<&k3_clks 120 3>, <&k3_clks 121 3>;
+				assigned-clocks = <&mcu_cpsw_cpts_mux>;
+				assigned-clock-parents = <&k3_clks 118 5>;
+			};
+		};
+	};
+
+	mcu_r5fss0: r5fss@41000000 {
+		compatible = "ti,am654-r5fss";
+		ti,cluster-mode = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x41000000 0x00 0x41000000 0x20000>,
+			 <0x41400000 0x00 0x41400000 0x20000>;
+		power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+
+		mcu_r5fss0_core0: r5f@41000000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41000000 0x00008000>,
+			      <0x41010000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <159>;
+			ti,sci-proc-ids = <0x01 0xff>;
+			resets = <&k3_reset 159 1>;
+			firmware-name = "am65x-mcu-r5f0_0-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+
+		mcu_r5fss0_core1: r5f@41400000 {
+			compatible = "ti,am654-r5f";
+			reg = <0x41400000 0x00008000>,
+			      <0x41410000 0x00008000>;
+			reg-names = "atcm", "btcm";
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <245>;
+			ti,sci-proc-ids = <0x02 0xff>;
+			resets = <&k3_reset 245 1>;
+			firmware-name = "am65x-mcu-r5f0_1-fw";
+			ti,atcm-enable = <1>;
+			ti,btcm-enable = <1>;
+			ti,loczrama = <1>;
+		};
+	};
+
+	mcu_rti1: watchdog@40610000 {
+		compatible = "ti,j7-rti-wdt";
+		reg = <0x0 0x40610000 0x0 0x100>;
+		clocks = <&k3_clks 135 0>;
+		power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>;
+		assigned-clocks = <&k3_clks 135 0>;
+		assigned-clock-parents = <&k3_clks 135 4>;
+	};
+};