Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 580 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
new file mode 100644
index 000000000..6948fd405
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -0,0 +1,580 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * dts file for Xilinx ZynqMP ZCU100 revC
+ *
+ * (C) Copyright 2016 - 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@xilinx.com>
+ * Nathalie Chan King Choy
+ */
+
+/dts-v1/;
+
+#include "zynqmp.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
+
+/ {
+	model = "ZynqMP ZCU100 RevC";
+	compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp";
+
+	aliases {
+		i2c0 = &i2c1;
+		rtc0 = &rtc;
+		serial0 = &uart1;
+		serial1 = &uart0;
+		serial2 = &dcc;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+	};
+
+	chosen {
+		bootargs = "earlycon";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		switch-4 {
+			label = "sw4";
+			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+			autorepeat;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-ds2 {
+			label = "ds2";
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-ds3 {
+			label = "ds3";
+			gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx"; /* WLAN tx */
+			default-state = "off";
+		};
+
+		led-ds4 {
+			label = "ds4";
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0rx"; /* WLAN rx */
+			default-state = "off";
+		};
+
+		led-ds5 {
+			label = "ds5";
+			gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "bluetooth-power";
+		};
+
+		led-vbus-det { /* U5 USB5744 VBUS detection via MIO25 */
+			label = "vbus_det";
+			gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	wmmcsdio_fixed: fixedregulator-mmcsdio {
+		compatible = "regulator-fixed";
+		regulator-name = "wmmcsdio_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		post-power-on-delay-ms = <10>;
+	};
+
+	ina226 {
+		compatible = "iio-hwmon";
+		io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>;
+	};
+
+	si5335_0: si5335_0 { /* clk0_usb - u23 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	si5335_1: si5335_1 { /* clk1_dp - u23 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&dcc {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL",
+			  "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS",
+			  "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1",
+			  "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1",
+			  "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT",
+			  "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE",
+			  "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL",
+			  "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C",
+			  "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E",
+			  "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3",
+			  "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2",
+			  "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3",
+			  "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK",
+			  "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1",
+			  "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6",
+			  "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */
+			  "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "";
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+	clock-frequency = <100000>;
+	i2c-mux@75 { /* u11 */
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2csw_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			label = "LS-I2C0";
+		};
+		i2csw_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			label = "LS-I2C1";
+		};
+		i2csw_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			label = "HS-I2C2";
+		};
+		i2csw_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			label = "HS-I2C3";
+		};
+		i2csw_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pmic: pmic@5e { /* Custom TI PMIC u33 */
+				compatible = "ti,tps65086";
+				reg = <0x5e>;
+				interrupt-parent = <&gpio>;
+				interrupts = <77 IRQ_TYPE_LEVEL_LOW>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+		};
+		i2csw_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+			/* PS_PMBUS */
+			u35: ina226@40 { /* u35 */
+				compatible = "ti,ina226";
+				#io-channel-cells = <1>;
+				reg = <0x40>;
+				shunt-resistor = <10000>;
+				/* MIO31 is alert which should be routed to PMUFW */
+			};
+		};
+		i2csw_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			/*
+			 * Not Connected
+			 */
+		};
+		i2csw_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+			/*
+			 * usb5744 (DNP) - U5
+			 * 100kHz - this is default freq for us
+			 */
+		};
+	};
+};
+
+&pinctrl0 {
+	status = "okay";
+	pinctrl_i2c1_default: i2c1-default {
+		mux {
+			groups = "i2c1_1_grp";
+			function = "i2c1";
+		};
+
+		conf {
+			groups = "i2c1_1_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio {
+		mux {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			function = "gpio0";
+		};
+
+		conf {
+			groups = "gpio0_4_grp", "gpio0_5_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci0_default: sdhci0-default {
+		mux {
+			groups = "sdio0_3_grp";
+			function = "sdio0";
+		};
+
+		conf {
+			groups = "sdio0_3_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+
+		mux-cd {
+			groups = "sdio0_cd_0_grp";
+			function = "sdio0_cd";
+		};
+
+		conf-cd {
+			groups = "sdio0_cd_0_grp";
+			bias-high-impedance;
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+	};
+
+	pinctrl_sdhci1_default: sdhci1-default {
+		mux {
+			groups = "sdio1_2_grp";
+			function = "sdio1";
+		};
+
+		conf {
+			groups = "sdio1_2_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_spi0_default: spi0-default {
+		mux {
+			groups = "spi0_3_grp";
+			function = "spi0";
+		};
+
+		conf {
+			groups = "spi0_3_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi0_ss_9_grp";
+			function = "spi0_ss";
+		};
+
+		conf-cs {
+			groups = "spi0_ss_9_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_spi1_default: spi1-default {
+		mux {
+			groups = "spi1_0_grp";
+			function = "spi1";
+		};
+
+		conf {
+			groups = "spi1_0_grp";
+			bias-disable;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux-cs {
+			groups = "spi1_ss_0_grp";
+			function = "spi1_ss";
+		};
+
+		conf-cs {
+			groups = "spi1_ss_0_grp";
+			bias-disable;
+		};
+
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		mux {
+			groups = "uart0_0_grp";
+			function = "uart0";
+		};
+
+		conf {
+			groups = "uart0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO3";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO2";
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		mux {
+			groups = "uart1_0_grp";
+			function = "uart1";
+		};
+
+		conf {
+			groups = "uart1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO1";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO0";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+
+		conf {
+			groups = "usb0_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			       "MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+
+		conf {
+			groups = "usb1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			       "MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+		};
+	};
+};
+
+&psgtr {
+	status = "okay";
+	/* usb3, dp */
+	clocks = <&si5335_0>, <&si5335_1>;
+	clock-names = "ref0", "ref1";
+};
+
+&rtc {
+	status = "okay";
+};
+
+/* SD0 only supports 3.3V, no level shifter */
+&sdhci0 {
+	status = "okay";
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci0_default>;
+	xlnx,mio-bank = <0>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhci1_default>;
+	xlnx,mio-bank = <0>;
+	non-removable;
+	disable-wp;
+	cap-power-off-card;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	vqmmc-supply = <&wmmcsdio_fixed>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wifi@2 {
+		compatible = "ti,wl1831";
+		reg = <2>;
+		interrupt-parent = <&gpio>;
+		interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */
+	};
+};
+
+&spi0 { /* Low Speed connector */
+	status = "okay";
+	label = "LS-SPI0";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+};
+
+&spi1 { /* High Speed connector */
+	status = "okay";
+	label = "HS-SPI1";
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	bluetooth {
+		compatible = "ti,wl1831-st";
+		enable-gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+/* ULPI SMSC USB3320 */
+&usb0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 0>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "peripheral";
+	maximum-speed = "super-speed";
+};
+
+/* ULPI SMSC USB3320 */
+&usb1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 0>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	maximum-speed = "super-speed";
+};
+
+&watchdog0 {
+	status = "okay";
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0", "dp-phy1";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
+	       <&psgtr 0 PHY_TYPE_DP 1 1>;
+};