Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 473 insertions, 0 deletions

diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
new file mode 100644
index 000000000..a7a857f17
--- /dev/null
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -0,0 +1,473 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (C) 2012,2013 - ARM Ltd
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * Derived from arch/arm/include/uapi/asm/kvm.h:
+ * Copyright (C) 2012 - Virtual Open Systems and Columbia University
+ * Author: Christoffer Dall <c.dall@virtualopensystems.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ARM_KVM_H__
+#define __ARM_KVM_H__
+
+#define KVM_SPSR_EL1	0
+#define KVM_SPSR_SVC	KVM_SPSR_EL1
+#define KVM_SPSR_ABT	1
+#define KVM_SPSR_UND	2
+#define KVM_SPSR_IRQ	3
+#define KVM_SPSR_FIQ	4
+#define KVM_NR_SPSR	5
+
+#ifndef __ASSEMBLY__
+#include <linux/psci.h>
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/sve_context.h>
+
+#define __KVM_HAVE_GUEST_DEBUG
+#define __KVM_HAVE_IRQ_LINE
+#define __KVM_HAVE_READONLY_MEM
+#define __KVM_HAVE_VCPU_EVENTS
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+#define KVM_DIRTY_LOG_PAGE_OFFSET 64
+
+#define KVM_REG_SIZE(id)						\
+	(1U << (((id) & KVM_REG_SIZE_MASK) >> KVM_REG_SIZE_SHIFT))
+
+struct kvm_regs {
+	struct user_pt_regs regs;	/* sp = sp_el0 */
+
+	__u64	sp_el1;
+	__u64	elr_el1;
+
+	__u64	spsr[KVM_NR_SPSR];
+
+	struct user_fpsimd_state fp_regs;
+};
+
+/*
+ * Supported CPU Targets - Adding a new target type is not recommended,
+ * unless there are some special registers not supported by the
+ * genericv8 syreg table.
+ */
+#define KVM_ARM_TARGET_AEM_V8		0
+#define KVM_ARM_TARGET_FOUNDATION_V8	1
+#define KVM_ARM_TARGET_CORTEX_A57	2
+#define KVM_ARM_TARGET_XGENE_POTENZA	3
+#define KVM_ARM_TARGET_CORTEX_A53	4
+/* Generic ARM v8 target */
+#define KVM_ARM_TARGET_GENERIC_V8	5
+
+#define KVM_ARM_NUM_TARGETS		6
+
+/* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
+#define KVM_ARM_DEVICE_TYPE_SHIFT	0
+#define KVM_ARM_DEVICE_TYPE_MASK	GENMASK(KVM_ARM_DEVICE_TYPE_SHIFT + 15, \
+						KVM_ARM_DEVICE_TYPE_SHIFT)
+#define KVM_ARM_DEVICE_ID_SHIFT		16
+#define KVM_ARM_DEVICE_ID_MASK		GENMASK(KVM_ARM_DEVICE_ID_SHIFT + 15, \
+						KVM_ARM_DEVICE_ID_SHIFT)
+
+/* Supported device IDs */
+#define KVM_ARM_DEVICE_VGIC_V2		0
+
+/* Supported VGIC address types  */
+#define KVM_VGIC_V2_ADDR_TYPE_DIST	0
+#define KVM_VGIC_V2_ADDR_TYPE_CPU	1
+
+#define KVM_VGIC_V2_DIST_SIZE		0x1000
+#define KVM_VGIC_V2_CPU_SIZE		0x2000
+
+/* Supported VGICv3 address types  */
+#define KVM_VGIC_V3_ADDR_TYPE_DIST	2
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST	3
+#define KVM_VGIC_ITS_ADDR_TYPE		4
+#define KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION	5
+
+#define KVM_VGIC_V3_DIST_SIZE		SZ_64K
+#define KVM_VGIC_V3_REDIST_SIZE		(2 * SZ_64K)
+#define KVM_VGIC_V3_ITS_SIZE		(2 * SZ_64K)
+
+#define KVM_ARM_VCPU_POWER_OFF		0 /* CPU is started in OFF state */
+#define KVM_ARM_VCPU_EL1_32BIT		1 /* CPU running a 32bit VM */
+#define KVM_ARM_VCPU_PSCI_0_2		2 /* CPU uses PSCI v0.2 */
+#define KVM_ARM_VCPU_PMU_V3		3 /* Support guest PMUv3 */
+#define KVM_ARM_VCPU_SVE		4 /* enable SVE for this CPU */
+#define KVM_ARM_VCPU_PTRAUTH_ADDRESS	5 /* VCPU uses address authentication */
+#define KVM_ARM_VCPU_PTRAUTH_GENERIC	6 /* VCPU uses generic authentication */
+
+struct kvm_vcpu_init {
+	__u32 target;
+	__u32 features[7];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+/*
+ * See v8 ARM ARM D7.3: Debug Registers
+ *
+ * The architectural limit is 16 debug registers of each type although
+ * in practice there are usually less (see ID_AA64DFR0_EL1).
+ *
+ * Although the control registers are architecturally defined as 32
+ * bits wide we use a 64 bit structure here to keep parity with
+ * KVM_GET/SET_ONE_REG behaviour which treats all system registers as
+ * 64 bit values. It also allows for the possibility of the
+ * architecture expanding the control registers without having to
+ * change the userspace ABI.
+ */
+#define KVM_ARM_MAX_DBG_REGS 16
+struct kvm_guest_debug_arch {
+	__u64 dbg_bcr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_bvr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_wcr[KVM_ARM_MAX_DBG_REGS];
+	__u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS];
+};
+
+#define KVM_DEBUG_ARCH_HSR_HIGH_VALID	(1 << 0)
+struct kvm_debug_exit_arch {
+	__u32 hsr;
+	__u32 hsr_high;	/* ESR_EL2[61:32] */
+	__u64 far;	/* used for watchpoints */
+};
+
+/*
+ * Architecture specific defines for kvm_guest_debug->control
+ */
+
+#define KVM_GUESTDBG_USE_SW_BP		(1 << 16)
+#define KVM_GUESTDBG_USE_HW		(1 << 17)
+
+struct kvm_sync_regs {
+	/* Used with KVM_CAP_ARM_USER_IRQ */
+	__u64 device_irq_level;
+};
+
+/*
+ * PMU filter structure. Describe a range of events with a particular
+ * action. To be used with KVM_ARM_VCPU_PMU_V3_FILTER.
+ */
+struct kvm_pmu_event_filter {
+	__u16	base_event;
+	__u16	nevents;
+
+#define KVM_PMU_EVENT_ALLOW	0
+#define KVM_PMU_EVENT_DENY	1
+
+	__u8	action;
+	__u8	pad[3];
+};
+
+/* for KVM_GET/SET_VCPU_EVENTS */
+struct kvm_vcpu_events {
+	struct {
+		__u8 serror_pending;
+		__u8 serror_has_esr;
+		__u8 ext_dabt_pending;
+		/* Align it to 8 bytes */
+		__u8 pad[5];
+		__u64 serror_esr;
+	} exception;
+	__u32 reserved[12];
+};
+
+struct kvm_arm_copy_mte_tags {
+	__u64 guest_ipa;
+	__u64 length;
+	void __user *addr;
+	__u64 flags;
+	__u64 reserved[2];
+};
+
+#define KVM_ARM_TAGS_TO_GUEST		0
+#define KVM_ARM_TAGS_FROM_GUEST		1
+
+/* If you need to interpret the index values, here is the key: */
+#define KVM_REG_ARM_COPROC_MASK		0x000000000FFF0000
+#define KVM_REG_ARM_COPROC_SHIFT	16
+
+/* Normal registers are mapped as coprocessor 16. */
+#define KVM_REG_ARM_CORE		(0x0010 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_CORE_REG(name)	(offsetof(struct kvm_regs, name) / sizeof(__u32))
+
+/* Some registers need more space to represent values. */
+#define KVM_REG_ARM_DEMUX		(0x0011 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_DEMUX_ID_MASK	0x000000000000FF00
+#define KVM_REG_ARM_DEMUX_ID_SHIFT	8
+#define KVM_REG_ARM_DEMUX_ID_CCSIDR	(0x00 << KVM_REG_ARM_DEMUX_ID_SHIFT)
+#define KVM_REG_ARM_DEMUX_VAL_MASK	0x00000000000000FF
+#define KVM_REG_ARM_DEMUX_VAL_SHIFT	0
+
+/* AArch64 system registers */
+#define KVM_REG_ARM64_SYSREG		(0x0013 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM64_SYSREG_OP0_MASK	0x000000000000c000
+#define KVM_REG_ARM64_SYSREG_OP0_SHIFT	14
+#define KVM_REG_ARM64_SYSREG_OP1_MASK	0x0000000000003800
+#define KVM_REG_ARM64_SYSREG_OP1_SHIFT	11
+#define KVM_REG_ARM64_SYSREG_CRN_MASK	0x0000000000000780
+#define KVM_REG_ARM64_SYSREG_CRN_SHIFT	7
+#define KVM_REG_ARM64_SYSREG_CRM_MASK	0x0000000000000078
+#define KVM_REG_ARM64_SYSREG_CRM_SHIFT	3
+#define KVM_REG_ARM64_SYSREG_OP2_MASK	0x0000000000000007
+#define KVM_REG_ARM64_SYSREG_OP2_SHIFT	0
+
+#define ARM64_SYS_REG_SHIFT_MASK(x,n) \
+	(((x) << KVM_REG_ARM64_SYSREG_ ## n ## _SHIFT) & \
+	KVM_REG_ARM64_SYSREG_ ## n ## _MASK)
+
+#define __ARM64_SYS_REG(op0,op1,crn,crm,op2) \
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SYSREG | \
+	ARM64_SYS_REG_SHIFT_MASK(op0, OP0) | \
+	ARM64_SYS_REG_SHIFT_MASK(op1, OP1) | \
+	ARM64_SYS_REG_SHIFT_MASK(crn, CRN) | \
+	ARM64_SYS_REG_SHIFT_MASK(crm, CRM) | \
+	ARM64_SYS_REG_SHIFT_MASK(op2, OP2))
+
+#define ARM64_SYS_REG(...) (__ARM64_SYS_REG(__VA_ARGS__) | KVM_REG_SIZE_U64)
+
+/* Physical Timer EL0 Registers */
+#define KVM_REG_ARM_PTIMER_CTL		ARM64_SYS_REG(3, 3, 14, 2, 1)
+#define KVM_REG_ARM_PTIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 2, 2)
+#define KVM_REG_ARM_PTIMER_CNT		ARM64_SYS_REG(3, 3, 14, 0, 1)
+
+/*
+ * EL0 Virtual Timer Registers
+ *
+ * WARNING:
+ *      KVM_REG_ARM_TIMER_CVAL and KVM_REG_ARM_TIMER_CNT are not defined
+ *      with the appropriate register encodings.  Their values have been
+ *      accidentally swapped.  As this is set API, the definitions here
+ *      must be used, rather than ones derived from the encodings.
+ */
+#define KVM_REG_ARM_TIMER_CTL		ARM64_SYS_REG(3, 3, 14, 3, 1)
+#define KVM_REG_ARM_TIMER_CVAL		ARM64_SYS_REG(3, 3, 14, 0, 2)
+#define KVM_REG_ARM_TIMER_CNT		ARM64_SYS_REG(3, 3, 14, 3, 2)
+
+/* KVM-as-firmware specific pseudo-registers */
+#define KVM_REG_ARM_FW			(0x0014 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_REG(r)		(KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+					 KVM_REG_ARM_FW | ((r) & 0xffff))
+#define KVM_REG_ARM_PSCI_VERSION	KVM_REG_ARM_FW_REG(0)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1	KVM_REG_ARM_FW_REG(1)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1_NOT_REQUIRED	2
+
+/*
+ * Only two states can be presented by the host kernel:
+ * - NOT_REQUIRED: the guest doesn't need to do anything
+ * - NOT_AVAIL: the guest isn't mitigated (it can still use SSBS if available)
+ *
+ * All the other values are deprecated. The host still accepts all
+ * values (they are ABI), but will narrow them to the above two.
+ */
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2	KVM_REG_ARM_FW_REG(2)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_UNKNOWN		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_AVAIL		2
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED     	(1U << 4)
+
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3	KVM_REG_ARM_FW_REG(3)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED	2
+
+/* SVE registers */
+#define KVM_REG_ARM64_SVE		(0x15 << KVM_REG_ARM_COPROC_SHIFT)
+
+/* Z- and P-regs occupy blocks at the following offsets within this range: */
+#define KVM_REG_ARM64_SVE_ZREG_BASE	0
+#define KVM_REG_ARM64_SVE_PREG_BASE	0x400
+#define KVM_REG_ARM64_SVE_FFR_BASE	0x600
+
+#define KVM_ARM64_SVE_NUM_ZREGS		__SVE_NUM_ZREGS
+#define KVM_ARM64_SVE_NUM_PREGS		__SVE_NUM_PREGS
+
+#define KVM_ARM64_SVE_MAX_SLICES	32
+
+#define KVM_REG_ARM64_SVE_ZREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_ZREG_BASE | \
+	 KVM_REG_SIZE_U2048 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_ZREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_PREG(n, i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_PREG_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 (((n) & (KVM_ARM64_SVE_NUM_PREGS - 1)) << 5) |			\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+#define KVM_REG_ARM64_SVE_FFR(i)					\
+	(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | KVM_REG_ARM64_SVE_FFR_BASE | \
+	 KVM_REG_SIZE_U256 |						\
+	 ((i) & (KVM_ARM64_SVE_MAX_SLICES - 1)))
+
+/*
+ * Register values for KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() and
+ * KVM_REG_ARM64_SVE_FFR() are represented in memory in an endianness-
+ * invariant layout which differs from the layout used for the FPSIMD
+ * V-registers on big-endian systems: see sigcontext.h for more explanation.
+ */
+
+#define KVM_ARM64_SVE_VQ_MIN __SVE_VQ_MIN
+#define KVM_ARM64_SVE_VQ_MAX __SVE_VQ_MAX
+
+/* Vector lengths pseudo-register: */
+#define KVM_REG_ARM64_SVE_VLS		(KVM_REG_ARM64 | KVM_REG_ARM64_SVE | \
+					 KVM_REG_SIZE_U512 | 0xffff)
+#define KVM_ARM64_SVE_VLS_WORDS	\
+	((KVM_ARM64_SVE_VQ_MAX - KVM_ARM64_SVE_VQ_MIN) / 64 + 1)
+
+/* Bitmap feature firmware registers */
+#define KVM_REG_ARM_FW_FEAT_BMAP		(0x0016 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_FEAT_BMAP_REG(r)		(KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+						KVM_REG_ARM_FW_FEAT_BMAP |	\
+						((r) & 0xffff))
+
+#define KVM_REG_ARM_STD_BMAP			KVM_REG_ARM_FW_FEAT_BMAP_REG(0)
+
+enum {
+	KVM_REG_ARM_STD_BIT_TRNG_V1_0	= 0,
+#ifdef __KERNEL__
+	KVM_REG_ARM_STD_BMAP_BIT_COUNT,
+#endif
+};
+
+#define KVM_REG_ARM_STD_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(1)
+
+enum {
+	KVM_REG_ARM_STD_HYP_BIT_PV_TIME	= 0,
+#ifdef __KERNEL__
+	KVM_REG_ARM_STD_HYP_BMAP_BIT_COUNT,
+#endif
+};
+
+#define KVM_REG_ARM_VENDOR_HYP_BMAP		KVM_REG_ARM_FW_FEAT_BMAP_REG(2)
+
+enum {
+	KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT	= 0,
+	KVM_REG_ARM_VENDOR_HYP_BIT_PTP		= 1,
+#ifdef __KERNEL__
+	KVM_REG_ARM_VENDOR_HYP_BMAP_BIT_COUNT,
+#endif
+};
+
+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR	0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS	1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS	2
+#define   KVM_DEV_ARM_VGIC_CPUID_SHIFT	32
+#define   KVM_DEV_ARM_VGIC_CPUID_MASK	(0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define   KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT 32
+#define   KVM_DEV_ARM_VGIC_V3_MPIDR_MASK \
+			(0xffffffffULL << KVM_DEV_ARM_VGIC_V3_MPIDR_SHIFT)
+#define   KVM_DEV_ARM_VGIC_OFFSET_SHIFT	0
+#define   KVM_DEV_ARM_VGIC_OFFSET_MASK	(0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+#define   KVM_DEV_ARM_VGIC_SYSREG_INSTR_MASK (0xffff)
+#define KVM_DEV_ARM_VGIC_GRP_NR_IRQS	3
+#define KVM_DEV_ARM_VGIC_GRP_CTRL	4
+#define KVM_DEV_ARM_VGIC_GRP_REDIST_REGS 5
+#define KVM_DEV_ARM_VGIC_GRP_CPU_SYSREGS 6
+#define KVM_DEV_ARM_VGIC_GRP_LEVEL_INFO  7
+#define KVM_DEV_ARM_VGIC_GRP_ITS_REGS 8
+#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT	10
+#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_MASK \
+			(0x3fffffULL << KVM_DEV_ARM_VGIC_LINE_LEVEL_INFO_SHIFT)
+#define KVM_DEV_ARM_VGIC_LINE_LEVEL_INTID_MASK	0x3ff
+#define VGIC_LEVEL_INFO_LINE_LEVEL	0
+
+#define   KVM_DEV_ARM_VGIC_CTRL_INIT		0
+#define   KVM_DEV_ARM_ITS_SAVE_TABLES           1
+#define   KVM_DEV_ARM_ITS_RESTORE_TABLES        2
+#define   KVM_DEV_ARM_VGIC_SAVE_PENDING_TABLES	3
+#define   KVM_DEV_ARM_ITS_CTRL_RESET		4
+
+/* Device Control API on vcpu fd */
+#define KVM_ARM_VCPU_PMU_V3_CTRL	0
+#define   KVM_ARM_VCPU_PMU_V3_IRQ	0
+#define   KVM_ARM_VCPU_PMU_V3_INIT	1
+#define   KVM_ARM_VCPU_PMU_V3_FILTER	2
+#define   KVM_ARM_VCPU_PMU_V3_SET_PMU	3
+#define KVM_ARM_VCPU_TIMER_CTRL		1
+#define   KVM_ARM_VCPU_TIMER_IRQ_VTIMER		0
+#define   KVM_ARM_VCPU_TIMER_IRQ_PTIMER		1
+#define KVM_ARM_VCPU_PVTIME_CTRL	2
+#define   KVM_ARM_VCPU_PVTIME_IPA	0
+
+/* KVM_IRQ_LINE irq field index values */
+#define KVM_ARM_IRQ_VCPU2_SHIFT		28
+#define KVM_ARM_IRQ_VCPU2_MASK		0xf
+#define KVM_ARM_IRQ_TYPE_SHIFT		24
+#define KVM_ARM_IRQ_TYPE_MASK		0xf
+#define KVM_ARM_IRQ_VCPU_SHIFT		16
+#define KVM_ARM_IRQ_VCPU_MASK		0xff
+#define KVM_ARM_IRQ_NUM_SHIFT		0
+#define KVM_ARM_IRQ_NUM_MASK		0xffff
+
+/* irq_type field */
+#define KVM_ARM_IRQ_TYPE_CPU		0
+#define KVM_ARM_IRQ_TYPE_SPI		1
+#define KVM_ARM_IRQ_TYPE_PPI		2
+
+/* out-of-kernel GIC cpu interrupt injection irq_number field */
+#define KVM_ARM_IRQ_CPU_IRQ		0
+#define KVM_ARM_IRQ_CPU_FIQ		1
+
+/*
+ * This used to hold the highest supported SPI, but it is now obsolete
+ * and only here to provide source code level compatibility with older
+ * userland. The highest SPI number can be set via KVM_DEV_ARM_VGIC_GRP_NR_IRQS.
+ */
+#ifndef __KERNEL__
+#define KVM_ARM_IRQ_GIC_MAX		127
+#endif
+
+/* One single KVM irqchip, ie. the VGIC */
+#define KVM_NR_IRQCHIPS          1
+
+/* PSCI interface */
+#define KVM_PSCI_FN_BASE		0x95c1ba5e
+#define KVM_PSCI_FN(n)			(KVM_PSCI_FN_BASE + (n))
+
+#define KVM_PSCI_FN_CPU_SUSPEND		KVM_PSCI_FN(0)
+#define KVM_PSCI_FN_CPU_OFF		KVM_PSCI_FN(1)
+#define KVM_PSCI_FN_CPU_ON		KVM_PSCI_FN(2)
+#define KVM_PSCI_FN_MIGRATE		KVM_PSCI_FN(3)
+
+#define KVM_PSCI_RET_SUCCESS		PSCI_RET_SUCCESS
+#define KVM_PSCI_RET_NI			PSCI_RET_NOT_SUPPORTED
+#define KVM_PSCI_RET_INVAL		PSCI_RET_INVALID_PARAMS
+#define KVM_PSCI_RET_DENIED		PSCI_RET_DENIED
+
+/* arm64-specific kvm_run::system_event flags */
+/*
+ * Reset caused by a PSCI v1.1 SYSTEM_RESET2 call.
+ * Valid only when the system event has a type of KVM_SYSTEM_EVENT_RESET.
+ */
+#define KVM_SYSTEM_EVENT_RESET_FLAG_PSCI_RESET2	(1ULL << 0)
+
+/* run->fail_entry.hardware_entry_failure_reason codes. */
+#define KVM_EXIT_FAIL_ENTRY_CPU_UNSUPPORTED	(1ULL << 0)
+
+#endif
+
+#endif /* __ARM_KVM_H__ */