Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 314 insertions, 0 deletions

diff --git a/arch/arm64/kernel/hyp-stub.S b/arch/arm64/kernel/hyp-stub.S
new file mode 100644
index 000000000..111ff33d9
--- /dev/null
+++ b/arch/arm64/kernel/hyp-stub.S
@@ -0,0 +1,314 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Hypervisor stub
+ *
+ * Copyright (C) 2012 ARM Ltd.
+ * Author:	Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+#include <asm/el2_setup.h>
+#include <asm/kvm_arm.h>
+#include <asm/kvm_asm.h>
+#include <asm/ptrace.h>
+#include <asm/virt.h>
+
+// Warning, hardcoded register allocation
+// This will clobber x1 and x2, and expect x1 to contain
+// the id register value as read from the HW
+.macro __check_override idreg, fld, width, pass, fail
+	ubfx	x1, x1, #\fld, #\width
+	cbz	x1, \fail
+
+	adr_l	x1, \idreg\()_override
+	ldr	x2, [x1, FTR_OVR_VAL_OFFSET]
+	ldr	x1, [x1, FTR_OVR_MASK_OFFSET]
+	ubfx	x2, x2, #\fld, #\width
+	ubfx	x1, x1, #\fld, #\width
+	cmp	x1, xzr
+	and	x2, x2, x1
+	csinv	x2, x2, xzr, ne
+	cbnz	x2, \pass
+	b	\fail
+.endm
+
+.macro check_override idreg, fld, pass, fail
+	mrs	x1, \idreg\()_el1
+	__check_override \idreg \fld 4 \pass \fail
+.endm
+
+	.text
+	.pushsection	.hyp.text, "ax"
+
+	.align 11
+
+SYM_CODE_START(__hyp_stub_vectors)
+	ventry	el2_sync_invalid		// Synchronous EL2t
+	ventry	el2_irq_invalid			// IRQ EL2t
+	ventry	el2_fiq_invalid			// FIQ EL2t
+	ventry	el2_error_invalid		// Error EL2t
+
+	ventry	elx_sync			// Synchronous EL2h
+	ventry	el2_irq_invalid			// IRQ EL2h
+	ventry	el2_fiq_invalid			// FIQ EL2h
+	ventry	el2_error_invalid		// Error EL2h
+
+	ventry	elx_sync			// Synchronous 64-bit EL1
+	ventry	el1_irq_invalid			// IRQ 64-bit EL1
+	ventry	el1_fiq_invalid			// FIQ 64-bit EL1
+	ventry	el1_error_invalid		// Error 64-bit EL1
+
+	ventry	el1_sync_invalid		// Synchronous 32-bit EL1
+	ventry	el1_irq_invalid			// IRQ 32-bit EL1
+	ventry	el1_fiq_invalid			// FIQ 32-bit EL1
+	ventry	el1_error_invalid		// Error 32-bit EL1
+SYM_CODE_END(__hyp_stub_vectors)
+
+	.align 11
+
+SYM_CODE_START_LOCAL(elx_sync)
+	cmp	x0, #HVC_SET_VECTORS
+	b.ne	1f
+	msr	vbar_el2, x1
+	b	9f
+
+1:	cmp	x0, #HVC_FINALISE_EL2
+	b.eq	__finalise_el2
+
+2:	cmp	x0, #HVC_SOFT_RESTART
+	b.ne	3f
+	mov	x0, x2
+	mov	x2, x4
+	mov	x4, x1
+	mov	x1, x3
+	br	x4				// no return
+
+3:	cmp	x0, #HVC_RESET_VECTORS
+	beq	9f				// Nothing to reset!
+
+	/* Someone called kvm_call_hyp() against the hyp-stub... */
+	mov_q	x0, HVC_STUB_ERR
+	eret
+
+9:	mov	x0, xzr
+	eret
+SYM_CODE_END(elx_sync)
+
+SYM_CODE_START_LOCAL(__finalise_el2)
+	check_override id_aa64pfr0 ID_AA64PFR0_EL1_SVE_SHIFT .Linit_sve .Lskip_sve
+
+.Linit_sve:	/* SVE register access */
+	mrs	x0, cptr_el2			// Disable SVE traps
+	bic	x0, x0, #CPTR_EL2_TZ
+	msr	cptr_el2, x0
+	isb
+	mov	x1, #ZCR_ELx_LEN_MASK		// SVE: Enable full vector
+	msr_s	SYS_ZCR_EL2, x1			// length for EL1.
+
+.Lskip_sve:
+	check_override id_aa64pfr1 ID_AA64PFR1_EL1_SME_SHIFT .Linit_sme .Lskip_sme
+
+.Linit_sme:	/* SME register access and priority mapping */
+	mrs	x0, cptr_el2			// Disable SME traps
+	bic	x0, x0, #CPTR_EL2_TSM
+	msr	cptr_el2, x0
+	isb
+
+	mrs	x1, sctlr_el2
+	orr	x1, x1, #SCTLR_ELx_ENTP2	// Disable TPIDR2 traps
+	msr	sctlr_el2, x1
+	isb
+
+	mov	x0, #0				// SMCR controls
+
+	// Full FP in SM?
+	mrs_s	x1, SYS_ID_AA64SMFR0_EL1
+	__check_override id_aa64smfr0 ID_AA64SMFR0_EL1_FA64_SHIFT 1 .Linit_sme_fa64 .Lskip_sme_fa64
+
+.Linit_sme_fa64:
+	orr	x0, x0, SMCR_ELx_FA64_MASK
+.Lskip_sme_fa64:
+
+	// ZT0 available?
+	mrs_s	x1, SYS_ID_AA64SMFR0_EL1
+	__check_override id_aa64smfr0 ID_AA64SMFR0_EL1_SMEver_SHIFT 4 .Linit_sme_zt0 .Lskip_sme_zt0
+.Linit_sme_zt0:
+	orr	x0, x0, SMCR_ELx_EZT0_MASK
+.Lskip_sme_zt0:
+
+	orr	x0, x0, #SMCR_ELx_LEN_MASK	// Enable full SME vector
+	msr_s	SYS_SMCR_EL2, x0		// length for EL1.
+
+	mrs_s	x1, SYS_SMIDR_EL1		// Priority mapping supported?
+	ubfx    x1, x1, #SMIDR_EL1_SMPS_SHIFT, #1
+	cbz     x1, .Lskip_sme
+
+	msr_s	SYS_SMPRIMAP_EL2, xzr		// Make all priorities equal
+
+	mrs	x1, id_aa64mmfr1_el1		// HCRX_EL2 present?
+	ubfx	x1, x1, #ID_AA64MMFR1_EL1_HCX_SHIFT, #4
+	cbz	x1, .Lskip_sme
+
+	mrs_s	x1, SYS_HCRX_EL2
+	orr	x1, x1, #HCRX_EL2_SMPME_MASK	// Enable priority mapping
+	msr_s	SYS_HCRX_EL2, x1
+
+.Lskip_sme:
+
+	// nVHE? No way! Give me the real thing!
+	// Sanity check: MMU *must* be off
+	mrs	x1, sctlr_el2
+	tbnz	x1, #0, 1f
+
+	// Needs to be VHE capable, obviously
+	check_override id_aa64mmfr1 ID_AA64MMFR1_EL1_VH_SHIFT 2f 1f
+
+1:	mov_q	x0, HVC_STUB_ERR
+	eret
+2:
+	// Engage the VHE magic!
+	mov_q	x0, HCR_HOST_VHE_FLAGS
+	msr	hcr_el2, x0
+	isb
+
+	// Use the EL1 allocated stack, per-cpu offset
+	mrs	x0, sp_el1
+	mov	sp, x0
+	mrs	x0, tpidr_el1
+	msr	tpidr_el2, x0
+
+	// FP configuration, vectors
+	mrs_s	x0, SYS_CPACR_EL12
+	msr	cpacr_el1, x0
+	mrs_s	x0, SYS_VBAR_EL12
+	msr	vbar_el1, x0
+
+	// Use EL2 translations for SPE & TRBE and disable access from EL1
+	mrs	x0, mdcr_el2
+	bic	x0, x0, #(MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT)
+	bic	x0, x0, #(MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT)
+	msr	mdcr_el2, x0
+
+	// Transfer the MM state from EL1 to EL2
+	mrs_s	x0, SYS_TCR_EL12
+	msr	tcr_el1, x0
+	mrs_s	x0, SYS_TTBR0_EL12
+	msr	ttbr0_el1, x0
+	mrs_s	x0, SYS_TTBR1_EL12
+	msr	ttbr1_el1, x0
+	mrs_s	x0, SYS_MAIR_EL12
+	msr	mair_el1, x0
+	isb
+
+	// Hack the exception return to stay at EL2
+	mrs	x0, spsr_el1
+	and	x0, x0, #~PSR_MODE_MASK
+	mov	x1, #PSR_MODE_EL2h
+	orr	x0, x0, x1
+	msr	spsr_el1, x0
+
+	b	enter_vhe
+SYM_CODE_END(__finalise_el2)
+
+	// At the point where we reach enter_vhe(), we run with
+	// the MMU off (which is enforced by __finalise_el2()).
+	// We thus need to be in the idmap, or everything will
+	// explode when enabling the MMU.
+
+	.pushsection	.idmap.text, "ax"
+
+SYM_CODE_START_LOCAL(enter_vhe)
+	// Invalidate TLBs before enabling the MMU
+	tlbi	vmalle1
+	dsb	nsh
+	isb
+
+	// Enable the EL2 S1 MMU, as set up from EL1
+	mrs_s	x0, SYS_SCTLR_EL12
+	set_sctlr_el1	x0
+
+	// Disable the EL1 S1 MMU for a good measure
+	mov_q	x0, INIT_SCTLR_EL1_MMU_OFF
+	msr_s	SYS_SCTLR_EL12, x0
+
+	mov	x0, xzr
+
+	eret
+SYM_CODE_END(enter_vhe)
+
+	.popsection
+
+.macro invalid_vector	label
+SYM_CODE_START_LOCAL(\label)
+	b \label
+SYM_CODE_END(\label)
+.endm
+
+	invalid_vector	el2_sync_invalid
+	invalid_vector	el2_irq_invalid
+	invalid_vector	el2_fiq_invalid
+	invalid_vector	el2_error_invalid
+	invalid_vector	el1_sync_invalid
+	invalid_vector	el1_irq_invalid
+	invalid_vector	el1_fiq_invalid
+	invalid_vector	el1_error_invalid
+
+	.popsection
+
+/*
+ * __hyp_set_vectors: Call this after boot to set the initial hypervisor
+ * vectors as part of hypervisor installation.  On an SMP system, this should
+ * be called on each CPU.
+ *
+ * x0 must be the physical address of the new vector table, and must be
+ * 2KB aligned.
+ *
+ * Before calling this, you must check that the stub hypervisor is installed
+ * everywhere, by waiting for any secondary CPUs to be brought up and then
+ * checking that is_hyp_mode_available() is true.
+ *
+ * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or
+ * something else went wrong... in such cases, trying to install a new
+ * hypervisor is unlikely to work as desired.
+ *
+ * When you call into your shiny new hypervisor, sp_el2 will contain junk,
+ * so you will need to set that to something sensible at the new hypervisor's
+ * initialisation entry point.
+ */
+
+SYM_FUNC_START(__hyp_set_vectors)
+	mov	x1, x0
+	mov	x0, #HVC_SET_VECTORS
+	hvc	#0
+	ret
+SYM_FUNC_END(__hyp_set_vectors)
+
+SYM_FUNC_START(__hyp_reset_vectors)
+	mov	x0, #HVC_RESET_VECTORS
+	hvc	#0
+	ret
+SYM_FUNC_END(__hyp_reset_vectors)
+
+/*
+ * Entry point to finalise EL2 and switch to VHE if deemed capable
+ *
+ * w0: boot mode, as returned by init_kernel_el()
+ */
+SYM_FUNC_START(finalise_el2)
+	// Need to have booted at EL2
+	cmp	w0, #BOOT_CPU_MODE_EL2
+	b.ne	1f
+
+	// and still be at EL1
+	mrs	x0, CurrentEL
+	cmp	x0, #CurrentEL_EL1
+	b.ne	1f
+
+	mov	x0, #HVC_FINALISE_EL2
+	hvc	#0
+1:
+	ret
+SYM_FUNC_END(finalise_el2)