Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 158 insertions, 0 deletions

diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
new file mode 100644
index 000000000..2ae7cff19
--- /dev/null
+++ b/arch/arm64/kernel/sleep.S
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/smp.h>
+
+	.text
+/*
+ * Implementation of MPIDR_EL1 hash algorithm through shifting
+ * and OR'ing.
+ *
+ * @dst: register containing hash result
+ * @rs0: register containing affinity level 0 bit shift
+ * @rs1: register containing affinity level 1 bit shift
+ * @rs2: register containing affinity level 2 bit shift
+ * @rs3: register containing affinity level 3 bit shift
+ * @mpidr: register containing MPIDR_EL1 value
+ * @mask: register containing MPIDR mask
+ *
+ * Pseudo C-code:
+ *
+ *u32 dst;
+ *
+ *compute_mpidr_hash(u32 rs0, u32 rs1, u32 rs2, u32 rs3, u64 mpidr, u64 mask) {
+ *	u32 aff0, aff1, aff2, aff3;
+ *	u64 mpidr_masked = mpidr & mask;
+ *	aff0 = mpidr_masked & 0xff;
+ *	aff1 = mpidr_masked & 0xff00;
+ *	aff2 = mpidr_masked & 0xff0000;
+ *	aff3 = mpidr_masked & 0xff00000000;
+ *	dst = (aff0 >> rs0 | aff1 >> rs1 | aff2 >> rs2 | aff3 >> rs3);
+ *}
+ * Input registers: rs0, rs1, rs2, rs3, mpidr, mask
+ * Output register: dst
+ * Note: input and output registers must be disjoint register sets
+         (eg: a macro instance with mpidr = x1 and dst = x1 is invalid)
+ */
+	.macro compute_mpidr_hash dst, rs0, rs1, rs2, rs3, mpidr, mask
+	and	\mpidr, \mpidr, \mask		// mask out MPIDR bits
+	and	\dst, \mpidr, #0xff		// mask=aff0
+	lsr	\dst ,\dst, \rs0		// dst=aff0>>rs0
+	and	\mask, \mpidr, #0xff00		// mask = aff1
+	lsr	\mask ,\mask, \rs1
+	orr	\dst, \dst, \mask		// dst|=(aff1>>rs1)
+	and	\mask, \mpidr, #0xff0000	// mask = aff2
+	lsr	\mask ,\mask, \rs2
+	orr	\dst, \dst, \mask		// dst|=(aff2>>rs2)
+	and	\mask, \mpidr, #0xff00000000	// mask = aff3
+	lsr	\mask ,\mask, \rs3
+	orr	\dst, \dst, \mask		// dst|=(aff3>>rs3)
+	.endm
+/*
+ * Save CPU state in the provided sleep_stack_data area, and publish its
+ * location for cpu_resume()'s use in sleep_save_stash.
+ *
+ * cpu_resume() will restore this saved state, and return. Because the
+ * link-register is saved and restored, it will appear to return from this
+ * function. So that the caller can tell the suspend/resume paths apart,
+ * __cpu_suspend_enter() will always return a non-zero value, whereas the
+ * path through cpu_resume() will return 0.
+ *
+ *  x0 = struct sleep_stack_data area
+ */
+SYM_FUNC_START(__cpu_suspend_enter)
+	stp	x29, lr, [x0, #SLEEP_STACK_DATA_CALLEE_REGS]
+	stp	x19, x20, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+16]
+	stp	x21, x22, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+32]
+	stp	x23, x24, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+48]
+	stp	x25, x26, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+64]
+	stp	x27, x28, [x0,#SLEEP_STACK_DATA_CALLEE_REGS+80]
+
+	/* save the sp in cpu_suspend_ctx */
+	mov	x2, sp
+	str	x2, [x0, #SLEEP_STACK_DATA_SYSTEM_REGS + CPU_CTX_SP]
+
+	/* find the mpidr_hash */
+	ldr_l	x1, sleep_save_stash
+	mrs	x7, mpidr_el1
+	adr_l	x9, mpidr_hash
+	ldr	x10, [x9, #MPIDR_HASH_MASK]
+	/*
+	 * Following code relies on the struct mpidr_hash
+	 * members size.
+	 */
+	ldp	w3, w4, [x9, #MPIDR_HASH_SHIFTS]
+	ldp	w5, w6, [x9, #(MPIDR_HASH_SHIFTS + 8)]
+	compute_mpidr_hash x8, x3, x4, x5, x6, x7, x10
+	add	x1, x1, x8, lsl #3
+
+	str	x0, [x1]
+	add	x0, x0, #SLEEP_STACK_DATA_SYSTEM_REGS
+	stp	x29, lr, [sp, #-16]!
+	bl	cpu_do_suspend
+	ldp	x29, lr, [sp], #16
+	mov	x0, #1
+	ret
+SYM_FUNC_END(__cpu_suspend_enter)
+
+	.pushsection ".idmap.text", "awx"
+SYM_CODE_START(cpu_resume)
+	mov	x0, xzr
+	bl	init_kernel_el
+	mov	x19, x0			// preserve boot mode
+#if VA_BITS > 48
+	ldr_l	x0, vabits_actual
+#endif
+	bl	__cpu_setup
+	/* enable the MMU early - so we can access sleep_save_stash by va */
+	adrp	x1, swapper_pg_dir
+	adrp	x2, idmap_pg_dir
+	bl	__enable_mmu
+	ldr	x8, =_cpu_resume
+	br	x8
+SYM_CODE_END(cpu_resume)
+	.ltorg
+	.popsection
+
+SYM_FUNC_START(_cpu_resume)
+	mov	x0, x19
+	bl	finalise_el2
+
+	mrs	x1, mpidr_el1
+	adr_l	x8, mpidr_hash		// x8 = struct mpidr_hash virt address
+
+	/* retrieve mpidr_hash members to compute the hash */
+	ldr	x2, [x8, #MPIDR_HASH_MASK]
+	ldp	w3, w4, [x8, #MPIDR_HASH_SHIFTS]
+	ldp	w5, w6, [x8, #(MPIDR_HASH_SHIFTS + 8)]
+	compute_mpidr_hash x7, x3, x4, x5, x6, x1, x2
+
+	/* x7 contains hash index, let's use it to grab context pointer */
+	ldr_l	x0, sleep_save_stash
+	ldr	x0, [x0, x7, lsl #3]
+	add	x29, x0, #SLEEP_STACK_DATA_CALLEE_REGS
+	add	x0, x0, #SLEEP_STACK_DATA_SYSTEM_REGS
+	/* load sp from context */
+	ldr	x2, [x0, #CPU_CTX_SP]
+	mov	sp, x2
+	/*
+	 * cpu_do_resume expects x0 to contain context address pointer
+	 */
+	bl	cpu_do_resume
+
+#if defined(CONFIG_KASAN) && defined(CONFIG_KASAN_STACK)
+	mov	x0, sp
+	bl	kasan_unpoison_task_stack_below
+#endif
+
+	ldp	x19, x20, [x29, #16]
+	ldp	x21, x22, [x29, #32]
+	ldp	x23, x24, [x29, #48]
+	ldp	x25, x26, [x29, #64]
+	ldp	x27, x28, [x29, #80]
+	ldp	x29, lr, [x29]
+	mov	x0, #0
+	ret
+SYM_FUNC_END(_cpu_resume)