Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 232 insertions, 0 deletions

diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c
new file mode 100644
index 000000000..febc95714
--- /dev/null
+++ b/arch/hexagon/kernel/time.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Time related functions for Hexagon architecture
+ *
+ * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/module.h>
+
+#include <asm/hexagon_vm.h>
+
+#define TIMER_ENABLE		BIT(0)
+
+/*
+ * For the clocksource we need:
+ *	pcycle frequency (600MHz)
+ * For the loops_per_jiffy we need:
+ *	thread/cpu frequency (100MHz)
+ * And for the timer, we need:
+ *	sleep clock rate
+ */
+
+cycles_t	pcycle_freq_mhz;
+cycles_t	thread_freq_mhz;
+cycles_t	sleep_clk_freq;
+
+/*
+ * 8x50 HDD Specs 5-8.  Simulator co-sim not fixed until
+ * release 1.1, and then it's "adjustable" and probably not defaulted.
+ */
+#define RTOS_TIMER_INT		3
+#define RTOS_TIMER_REGS_ADDR	0xAB000000UL
+
+static struct resource rtos_timer_resources[] = {
+	{
+		.start	= RTOS_TIMER_REGS_ADDR,
+		.end	= RTOS_TIMER_REGS_ADDR+PAGE_SIZE-1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rtos_timer_device = {
+	.name		= "rtos_timer",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtos_timer_resources),
+	.resource	= rtos_timer_resources,
+};
+
+/*  A lot of this stuff should move into a platform specific section.  */
+struct adsp_hw_timer_struct {
+	u32 match;   /*  Match value  */
+	u32 count;
+	u32 enable;  /*  [1] - CLR_ON_MATCH_EN, [0] - EN  */
+	u32 clear;   /*  one-shot register that clears the count  */
+};
+
+/*  Look for "TCX0" for related constants.  */
+static __iomem struct adsp_hw_timer_struct *rtos_timer;
+
+static u64 timer_get_cycles(struct clocksource *cs)
+{
+	return (u64) __vmgettime();
+}
+
+static struct clocksource hexagon_clocksource = {
+	.name		= "pcycles",
+	.rating		= 250,
+	.read		= timer_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int set_next_event(unsigned long delta, struct clock_event_device *evt)
+{
+	/*  Assuming the timer will be disabled when we enter here.  */
+
+	iowrite32(1, &rtos_timer->clear);
+	iowrite32(0, &rtos_timer->clear);
+
+	iowrite32(delta, &rtos_timer->match);
+	iowrite32(TIMER_ENABLE, &rtos_timer->enable);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+/*  Broadcast mechanism  */
+static void broadcast(const struct cpumask *mask)
+{
+	send_ipi(mask, IPI_TIMER);
+}
+#endif
+
+/* XXX Implement set_state_shutdown() */
+static struct clock_event_device hexagon_clockevent_dev = {
+	.name		= "clockevent",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 400,
+	.irq		= RTOS_TIMER_INT,
+	.set_next_event = set_next_event,
+#ifdef CONFIG_SMP
+	.broadcast	= broadcast,
+#endif
+};
+
+#ifdef CONFIG_SMP
+static DEFINE_PER_CPU(struct clock_event_device, clock_events);
+
+void setup_percpu_clockdev(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
+	struct clock_event_device *dummy_clock_dev =
+		&per_cpu(clock_events, cpu);
+
+	memcpy(dummy_clock_dev, ce_dev, sizeof(*dummy_clock_dev));
+	INIT_LIST_HEAD(&dummy_clock_dev->list);
+
+	dummy_clock_dev->features = CLOCK_EVT_FEAT_DUMMY;
+	dummy_clock_dev->cpumask = cpumask_of(cpu);
+
+	clockevents_register_device(dummy_clock_dev);
+}
+
+/*  Called from smp.c for each CPU's timer ipi call  */
+void ipi_timer(void)
+{
+	int cpu = smp_processor_id();
+	struct clock_event_device *ce_dev = &per_cpu(clock_events, cpu);
+
+	ce_dev->event_handler(ce_dev);
+}
+#endif /* CONFIG_SMP */
+
+static irqreturn_t timer_interrupt(int irq, void *devid)
+{
+	struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
+
+	iowrite32(0, &rtos_timer->enable);
+	ce_dev->event_handler(ce_dev);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * time_init_deferred - called by start_kernel to set up timer/clock source
+ *
+ * Install the IRQ handler for the clock, setup timers.
+ * This is done late, as that way, we can use ioremap().
+ *
+ * This runs just before the delay loop is calibrated, and
+ * is used for delay calibration.
+ */
+void __init time_init_deferred(void)
+{
+	struct resource *resource = NULL;
+	struct clock_event_device *ce_dev = &hexagon_clockevent_dev;
+	unsigned long flag = IRQF_TIMER | IRQF_TRIGGER_RISING;
+
+	ce_dev->cpumask = cpu_all_mask;
+
+	if (!resource)
+		resource = rtos_timer_device.resource;
+
+	/*  ioremap here means this has to run later, after paging init  */
+	rtos_timer = ioremap(resource->start, resource_size(resource));
+
+	if (!rtos_timer) {
+		release_mem_region(resource->start, resource_size(resource));
+	}
+	clocksource_register_khz(&hexagon_clocksource, pcycle_freq_mhz * 1000);
+
+	/*  Note: the sim generic RTOS clock is apparently really 18750Hz  */
+
+	/*
+	 * Last arg is some guaranteed seconds for which the conversion will
+	 * work without overflow.
+	 */
+	clockevents_calc_mult_shift(ce_dev, sleep_clk_freq, 4);
+
+	ce_dev->max_delta_ns = clockevent_delta2ns(0x7fffffff, ce_dev);
+	ce_dev->max_delta_ticks = 0x7fffffff;
+	ce_dev->min_delta_ns = clockevent_delta2ns(0xf, ce_dev);
+	ce_dev->min_delta_ticks = 0xf;
+
+#ifdef CONFIG_SMP
+	setup_percpu_clockdev();
+#endif
+
+	clockevents_register_device(ce_dev);
+	if (request_irq(ce_dev->irq, timer_interrupt, flag, "rtos_timer", NULL))
+		pr_err("Failed to register rtos_timer interrupt\n");
+}
+
+void __init time_init(void)
+{
+	late_time_init = time_init_deferred;
+}
+
+void __delay(unsigned long cycles)
+{
+	unsigned long long start = __vmgettime();
+
+	while ((__vmgettime() - start) < cycles)
+		cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * This could become parametric or perhaps even computed at run-time,
+ * but for now we take the observed simulator jitter.
+ */
+static long long fudgefactor = 350;  /* Maybe lower if kernel optimized. */
+
+void __udelay(unsigned long usecs)
+{
+	unsigned long long start = __vmgettime();
+	unsigned long long finish = (pcycle_freq_mhz * usecs) - fudgefactor;
+
+	while ((__vmgettime() - start) < finish)
+		cpu_relax(); /*  not sure how this improves readability  */
+}
+EXPORT_SYMBOL(__udelay);