Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 410 insertions, 0 deletions

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
new file mode 100644
index 000000000..d7e4a24e8
--- /dev/null
+++ b/arch/ia64/Kconfig
@@ -0,0 +1,410 @@
+# SPDX-License-Identifier: GPL-2.0
+config PGTABLE_LEVELS
+	int "Page Table Levels" if !IA64_PAGE_SIZE_64KB
+	range 3 4 if !IA64_PAGE_SIZE_64KB
+	default 3
+
+menu "Processor type and features"
+
+config IA64
+	bool
+	select ARCH_BINFMT_ELF_EXTRA_PHDRS
+	select ARCH_HAS_DMA_MARK_CLEAN
+	select ARCH_HAS_STRNCPY_FROM_USER
+	select ARCH_HAS_STRNLEN_USER
+	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_MIGHT_HAVE_PC_SERIO
+	select ACPI
+	select ACPI_NUMA if NUMA
+	select ARCH_ENABLE_MEMORY_HOTPLUG
+	select ARCH_ENABLE_MEMORY_HOTREMOVE
+	select ARCH_SUPPORTS_ACPI
+	select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
+	select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
+	select FORCE_PCI
+	select PCI_DOMAINS if PCI
+	select PCI_MSI
+	select PCI_SYSCALL if PCI
+	select HAVE_ASM_MODVERSIONS
+	select HAVE_UNSTABLE_SCHED_CLOCK
+	select HAVE_EXIT_THREAD
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_DYNAMIC_FTRACE if (!ITANIUM)
+	select HAVE_FUNCTION_TRACER
+	select HAVE_SETUP_PER_CPU_AREA
+	select TTY
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_FUNCTION_DESCRIPTORS
+	select HAVE_VIRT_CPU_ACCOUNTING
+	select HUGETLB_PAGE_SIZE_VARIABLE if HUGETLB_PAGE
+	select GENERIC_IRQ_PROBE
+	select GENERIC_PENDING_IRQ if SMP
+	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_LEGACY
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select GENERIC_IOMAP
+	select GENERIC_SMP_IDLE_THREAD
+	select ARCH_TASK_STRUCT_ON_STACK
+	select ARCH_TASK_STRUCT_ALLOCATOR
+	select ARCH_THREAD_STACK_ALLOCATOR
+	select ARCH_CLOCKSOURCE_DATA
+	select GENERIC_TIME_VSYSCALL
+	select LEGACY_TIMER_TICK
+	select SWIOTLB
+	select SYSCTL_ARCH_UNALIGN_NO_WARN
+	select HAVE_MOD_ARCH_SPECIFIC
+	select MODULES_USE_ELF_RELA
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select HAVE_ARCH_AUDITSYSCALL
+	select NEED_DMA_MAP_STATE
+	select NEED_SG_DMA_LENGTH
+	select NUMA if !FLATMEM
+	select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
+	select ZONE_DMA32
+	select FUNCTION_ALIGNMENT_32B
+	default y
+	help
+	  The Itanium Processor Family is Intel's 64-bit successor to
+	  the 32-bit X86 line.  The IA-64 Linux project has a home
+	  page at <http://www.linuxia64.org/> and a mailing list at
+	  <linux-ia64@vger.kernel.org>.
+
+config 64BIT
+	bool
+	select ATA_NONSTANDARD if ATA
+	default y
+
+config MMU
+	bool
+	default y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config GENERIC_LOCKBREAK
+	def_bool n
+
+config GENERIC_CALIBRATE_DELAY
+	bool
+	default y
+
+config DMI
+	bool
+	default y
+	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
+
+config EFI
+	bool
+	select UCS2_STRING
+	default y
+
+config SCHED_OMIT_FRAME_POINTER
+	bool
+	default y
+
+config IA64_UNCACHED_ALLOCATOR
+	bool
+	select GENERIC_ALLOCATOR
+
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on IA64_UNCACHED_ALLOCATOR
+
+config AUDIT_ARCH
+	bool
+	default y
+
+choice
+	prompt "Processor type"
+	default ITANIUM
+
+config ITANIUM
+	bool "Itanium"
+	help
+	  Select your IA-64 processor type.  The default is Itanium.
+	  This choice is safe for all IA-64 systems, but may not perform
+	  optimally on systems with, say, Itanium 2 or newer processors.
+
+config MCKINLEY
+	bool "Itanium 2"
+	help
+	  Select this to configure for an Itanium 2 (McKinley) processor.
+
+endchoice
+
+choice
+	prompt "Kernel page size"
+	default IA64_PAGE_SIZE_16KB
+
+config IA64_PAGE_SIZE_4KB
+	bool "4KB"
+	help
+	  This lets you select the page size of the kernel.  For best IA-64
+	  performance, a page size of 8KB or 16KB is recommended.  For best
+	  IA-32 compatibility, a page size of 4KB should be selected (the vast
+	  majority of IA-32 binaries work perfectly fine with a larger page
+	  size).  For Itanium 2 or newer systems, a page size of 64KB can also
+	  be selected.
+
+	  4KB                For best IA-32 compatibility
+	  8KB                For best IA-64 performance
+	  16KB               For best IA-64 performance
+	  64KB               Requires Itanium 2 or newer processor.
+
+	  If you don't know what to do, choose 16KB.
+
+config IA64_PAGE_SIZE_8KB
+	bool "8KB"
+
+config IA64_PAGE_SIZE_16KB
+	bool "16KB"
+
+config IA64_PAGE_SIZE_64KB
+	depends on !ITANIUM
+	bool "64KB"
+
+endchoice
+
+source "kernel/Kconfig.hz"
+
+config IA64_BRL_EMU
+	bool
+	depends on ITANIUM
+	default y
+
+# align cache-sensitive data to 128 bytes
+config IA64_L1_CACHE_SHIFT
+	int
+	default "7" if MCKINLEY
+	default "6" if ITANIUM
+
+config IA64_SGI_UV
+	bool "SGI-UV support"
+	help
+	  Selecting this option will add specific support for running on SGI
+	  UV based systems.  If you have an SGI UV system or are building a
+	  distro kernel, select this option.
+
+config IA64_HP_SBA_IOMMU
+	bool "HP SBA IOMMU support"
+	select DMA_OPS
+	default y
+	help
+	  Say Y here to add support for the SBA IOMMU found on HP zx1 and
+	  sx1000 systems.  If you're unsure, answer Y.
+
+config IA64_CYCLONE
+	bool "Cyclone (EXA) Time Source support"
+	help
+	  Say Y here to enable support for IBM EXA Cyclone time source.
+	  If you're unsure, answer N.
+
+config ARCH_FORCE_MAX_ORDER
+	int "MAX_ORDER (11 - 17)"  if !HUGETLB_PAGE
+	range 11 17  if !HUGETLB_PAGE
+	default "17" if HUGETLB_PAGE
+	default "11"
+
+config SMP
+	bool "Symmetric multi-processing support"
+	help
+	  This enables support for systems with more than one CPU. If you have
+	  a system with only one CPU, say N.  If you have a system with more
+	  than one CPU, say Y.
+
+	  If you say N here, the kernel will run on single and multiprocessor
+	  systems, but will use only one CPU of a multiprocessor system.  If
+	  you say Y here, the kernel will run on many, but not all,
+	  single processor systems.  On a single processor system, the kernel
+	  will run faster if you say N here.
+
+	  See also the SMP-HOWTO available at
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  If you don't know what to do here, say N.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
+	depends on SMP
+	default "4096"
+	help
+	  You should set this to the number of CPUs in your system, but
+	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
+	  only use 2 CPUs on a >2 CPU system.  Setting this to a value larger
+	  than 64 will cause the use of a CPU mask array, causing a small
+	  performance hit.
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	depends on SMP
+	default n
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu/cpu#.
+	  Say N if you want to disable CPU hotplug.
+
+config SCHED_SMT
+	bool "SMT scheduler support"
+	depends on SMP
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  Intel IA64 chips with MultiThreading at a cost of slightly increased
+	  overhead in some places. If unsure say N here.
+
+config PERMIT_BSP_REMOVE
+	bool "Support removal of Bootstrap Processor"
+	depends on HOTPLUG_CPU
+	default n
+	help
+	Say Y here if your platform SAL will support removal of BSP with HOTPLUG_CPU
+	support. 
+
+config FORCE_CPEI_RETARGET
+	bool "Force assumption that CPEI can be re-targeted"
+	depends on PERMIT_BSP_REMOVE
+	default n
+	help
+	Say Y if you need to force the assumption that CPEI can be re-targeted to
+	any cpu in the system. This hint is available via ACPI 3.0 specifications.
+	Tiger4 systems are capable of re-directing CPEI to any CPU other than BSP.
+	This option it useful to enable this feature on older BIOS's as well.
+	You can also enable this by using boot command line option force_cpei=1.
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool y
+
+config ARCH_FLATMEM_ENABLE
+	def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool y
+	depends on ARCH_SPARSEMEM_ENABLE
+
+config NUMA
+	bool "NUMA support"
+	depends on !FLATMEM
+	select SMP
+	select USE_PERCPU_NUMA_NODE_ID
+	help
+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
+	  Access).  This option is for configuring high-end multiprocessor
+	  server systems.  If in doubt, say N.
+
+config NODES_SHIFT
+	int "Max num nodes shift(3-10)"
+	range 3 10
+	default "10"
+	depends on NUMA
+	help
+	  This option specifies the maximum number of nodes in your SSI system.
+	  MAX_NUMNODES will be 2^(This value).
+	  If in doubt, use the default.
+
+config HAVE_ARCH_NODEDATA_EXTENSION
+	def_bool y
+	depends on NUMA
+
+config HAVE_MEMORYLESS_NODES
+	def_bool NUMA
+
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+	depends on PROC_KCORE
+
+config IA64_MCA_RECOVERY
+	bool "MCA recovery from errors other than TLB."
+
+config IA64_PALINFO
+	tristate "/proc/pal support"
+	help
+	  If you say Y here, you are able to get PAL (Processor Abstraction
+	  Layer) information in /proc/pal.  This contains useful information
+	  about the processors in your systems, such as cache and TLB sizes
+	  and the PAL firmware version in use.
+
+	  To use this option, you have to ensure that the "/proc file system
+	  support" (CONFIG_PROC_FS) is enabled, too.
+
+config IA64_MC_ERR_INJECT
+	tristate "MC error injection support"
+	help
+	  Adds support for MC error injection. If enabled, the kernel 
+	  will provide a sysfs interface for user applications to
+	  call MC error injection PAL procedures to inject various errors.
+	  This is a useful tool for MCA testing.
+
+	  If you're unsure, do not select this option.
+
+config IA64_ESI
+	bool "ESI (Extensible SAL Interface) support"
+	help
+	  If you say Y here, support is built into the kernel to
+	  make ESI calls.  ESI calls are used to support vendor-specific
+	  firmware extensions, such as the ability to inject memory-errors
+	  for test-purposes.  If you're unsure, say N.
+
+config IA64_HP_AML_NFW
+	bool "Support ACPI AML calls to native firmware"
+	help
+	  This driver installs a global ACPI Operation Region handler for
+	  region 0xA1.  AML methods can use this OpRegion to call arbitrary
+	  native firmware functions.  The driver installs the OpRegion
+	  handler if there is an HPQ5001 device or if the user supplies
+	  the "force" module parameter, e.g., with the "aml_nfw.force"
+	  kernel command line option.
+
+config KEXEC
+	bool "kexec system call"
+	depends on !SMP || HOTPLUG_CPU
+	select KEXEC_CORE
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+	  The name comes from the similarity to the exec system call.
+
+	  It is an ongoing process to be certain the hardware in a machine
+	  is properly shutdown, so do not be surprised if this code does not
+	  initially work for you.  As of this writing the exact hardware
+	  interface is strongly in flux, so no good recommendation can be
+	  made.
+
+config CRASH_DUMP
+	  bool "kernel crash dumps"
+	  depends on IA64_MCA_RECOVERY && (!SMP || HOTPLUG_CPU)
+	  help
+	    Generate crash dump after being started by kexec.
+
+endmenu
+
+menu "Power management and ACPI options"
+
+source "kernel/power/Kconfig"
+
+source "drivers/acpi/Kconfig"
+
+if PM
+menu "CPU Frequency scaling"
+source "drivers/cpufreq/Kconfig"
+endmenu
+endif
+
+endmenu
+
+config MSPEC
+	tristate "Memory special operations driver"
+	depends on IA64
+	select IA64_UNCACHED_ALLOCATOR
+	help
+	  If you have an ia64 and you want to enable memory special
+	  operations support (formerly known as fetchop), say Y here,
+	  otherwise say N.