Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 453 insertions, 0 deletions

diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
new file mode 100644
index 000000000..1accb7842
--- /dev/null
+++ b/arch/ia64/include/asm/bitops.h
@@ -0,0 +1,453 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_IA64_BITOPS_H
+#define _ASM_IA64_BITOPS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64
+ * O(1) scheduler patch
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/intrinsics.h>
+#include <asm/barrier.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * The address must be (at least) "long" aligned.
+ * Note that there are driver (e.g., eepro100) which use these operations to
+ * operate on hw-defined data-structures, so we can't easily change these
+ * operations to force a bigger alignment.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+static __inline__ void
+set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * arch___set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __always_inline void
+arch___set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_atomic() and/or smp_mb__after_atomic()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void
+clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * clear_bit_unlock - Clears a bit in memory with release
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit_unlock() is atomic and may not be reordered.  It does
+ * contain a memory barrier suitable for unlock type operations.
+ */
+static __inline__ void
+clear_bit_unlock (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_rel(m, old, new) != old);
+}
+
+/**
+ * __clear_bit_unlock - Non-atomically clears a bit in memory with release
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * Similarly to clear_bit_unlock, the implementation uses a store
+ * with release semantics. See also arch_spin_unlock().
+ */
+static __inline__ void
+__clear_bit_unlock(int nr, void *addr)
+{
+	__u32 * const m = (__u32 *) addr + (nr >> 5);
+	__u32 const new = *m & ~(1 << (nr & 31));
+
+	ia64_st4_rel_nta(m, new);
+}
+
+/**
+ * arch___clear_bit - Clears a bit in memory (non-atomic version)
+ * @nr: the bit to clear
+ * @addr: the address to start counting from
+ *
+ * Unlike clear_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __always_inline void
+arch___clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to toggle
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void
+change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * arch___change_bit - Toggle a bit in memory
+ * @nr: the bit to toggle
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __always_inline void
+arch___change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on ia64
+ */
+#define test_and_set_bit_lock test_and_set_bit
+
+/**
+ * arch___test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __always_inline bool
+arch___test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = (*p & m) != 0;
+
+	*p |= m;
+	return oldbitset;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & ~mask) != 0;
+}
+
+/**
+ * arch___test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __always_inline bool
+arch___test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = (*p & m) != 0;
+
+	*p &= ~m;
+	return oldbitset;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * arch___test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ */
+static __always_inline bool
+arch___test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	__u32 old, bit = (1 << (nr & 31));
+	__u32 *m = (__u32 *) addr + (nr >> 5);
+
+	old = *m;
+	*m = old ^ bit;
+	return (old & bit) != 0;
+}
+
+#define arch_test_bit generic_test_bit
+#define arch_test_bit_acquire generic_test_bit_acquire
+
+/**
+ * ffz - find the first zero bit in a long word
+ * @x: The long word to find the bit in
+ *
+ * Returns the bit-number (0..63) of the first (least significant) zero bit.
+ * Undefined if no zero exists, so code should check against ~0UL first...
+ */
+static inline unsigned long
+ffz (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt(x & (~x - 1));
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @x: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long
+__ffs (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt((x-1) & ~x);
+	return result;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * Return bit number of last (most-significant) bit set.  Undefined
+ * for x==0.  Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3).
+ */
+static inline unsigned long
+ia64_fls (unsigned long x)
+{
+	long double d = x;
+	long exp;
+
+	exp = ia64_getf_exp(d);
+	return exp - 0xffff;
+}
+
+/*
+ * Find the last (most significant) bit set.  Returns 0 for x==0 and
+ * bits are numbered from 1..32 (e.g., fls(9) == 4).
+ */
+static inline int fls(unsigned int t)
+{
+	unsigned long x = t & 0xffffffffu;
+
+	if (!x)
+		return 0;
+	x |= x >> 1;
+	x |= x >> 2;
+	x |= x >> 4;
+	x |= x >> 8;
+	x |= x >> 16;
+	return ia64_popcnt(x);
+}
+
+/*
+ * Find the last (most significant) bit set.  Undefined for x==0.
+ * Bits are numbered from 0..63 (e.g., __fls(9) == 3).
+ */
+static inline unsigned long
+__fls (unsigned long x)
+{
+	x |= x >> 1;
+	x |= x >> 2;
+	x |= x >> 4;
+	x |= x >> 8;
+	x |= x >> 16;
+	x |= x >> 32;
+	return ia64_popcnt(x) - 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/builtin-ffs.h>
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+static __inline__ unsigned long __arch_hweight64(unsigned long x)
+{
+	unsigned long result;
+	result = ia64_popcnt(x);
+	return result;
+}
+
+#define __arch_hweight32(x) ((unsigned int) __arch_hweight64((x) & 0xfffffffful))
+#define __arch_hweight16(x) ((unsigned int) __arch_hweight64((x) & 0xfffful))
+#define __arch_hweight8(x)  ((unsigned int) __arch_hweight64((x) & 0xfful))
+
+#include <asm-generic/bitops/const_hweight.h>
+
+#endif /* __KERNEL__ */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/non-instrumented-non-atomic.h>
+
+#include <asm-generic/bitops/le.h>
+
+#include <asm-generic/bitops/ext2-atomic-setbit.h>
+
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_BITOPS_H */