Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 131 insertions, 0 deletions

diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S
new file mode 100644
index 000000000..57bada6b4
--- /dev/null
+++ b/arch/loongarch/kernel/head.S
@@ -0,0 +1,131 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
+ */
+#include <linux/init.h>
+#include <linux/threads.h>
+
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include <asm/asmmacro.h>
+#include <asm/bug.h>
+#include <asm/regdef.h>
+#include <asm/loongarch.h>
+#include <asm/stackframe.h>
+
+#ifdef CONFIG_EFI_STUB
+
+#include "efi-header.S"
+
+	__HEAD
+
+_head:
+	.word	MZ_MAGIC		/* "MZ", MS-DOS header */
+	.org	0x8
+	.dword	kernel_entry		/* Kernel entry point */
+	.dword	_end - _text		/* Kernel image effective size */
+	.quad	0			/* Kernel image load offset from start of RAM */
+	.org	0x38			/* 0x20 ~ 0x37 reserved */
+	.long	LINUX_PE_MAGIC
+	.long	pe_header - _head	/* Offset to the PE header */
+
+pe_header:
+	__EFI_PE_HEADER
+
+SYM_DATA(kernel_asize, .long _end - _text);
+SYM_DATA(kernel_fsize, .long _edata - _text);
+SYM_DATA(kernel_offset, .long kernel_offset - _text);
+
+#endif
+
+	__REF
+
+	.align 12
+
+SYM_CODE_START(kernel_entry)			# kernel entry point
+
+	/* Config direct window and set PG */
+	li.d		t0, CSR_DMW0_INIT	# UC, PLV0, 0x8000 xxxx xxxx xxxx
+	csrwr		t0, LOONGARCH_CSR_DMWIN0
+	li.d		t0, CSR_DMW1_INIT	# CA, PLV0, 0x9000 xxxx xxxx xxxx
+	csrwr		t0, LOONGARCH_CSR_DMWIN1
+
+	/* We might not get launched at the address the kernel is linked to,
+	   so we jump there.  */
+	la.abs		t0, 0f
+	jr		t0
+0:
+	/* Enable PG */
+	li.w		t0, 0xb0		# PLV=0, IE=0, PG=1
+	csrwr		t0, LOONGARCH_CSR_CRMD
+	li.w		t0, 0x04		# PLV=0, PIE=1, PWE=0
+	csrwr		t0, LOONGARCH_CSR_PRMD
+	li.w		t0, 0x00		# FPE=0, SXE=0, ASXE=0, BTE=0
+	csrwr		t0, LOONGARCH_CSR_EUEN
+
+	la.pcrel	t0, __bss_start		# clear .bss
+	st.d		zero, t0, 0
+	la.pcrel	t1, __bss_stop - LONGSIZE
+1:
+	addi.d		t0, t0, LONGSIZE
+	st.d		zero, t0, 0
+	bne		t0, t1, 1b
+
+	la.pcrel	t0, fw_arg0
+	st.d		a0, t0, 0		# firmware arguments
+	la.pcrel	t0, fw_arg1
+	st.d		a1, t0, 0
+	la.pcrel	t0, fw_arg2
+	st.d		a2, t0, 0
+
+	/* KSave3 used for percpu base, initialized as 0 */
+	csrwr		zero, PERCPU_BASE_KS
+	/* GPR21 used for percpu base (runtime), initialized as 0 */
+	move		u0, zero
+
+	la.pcrel	tp, init_thread_union
+	/* Set the SP after an empty pt_regs.  */
+	PTR_LI		sp, (_THREAD_SIZE - PT_SIZE)
+	PTR_ADD		sp, sp, tp
+	set_saved_sp	sp, t0, t1
+
+	bl		start_kernel
+	ASM_BUG()
+
+SYM_CODE_END(kernel_entry)
+
+#ifdef CONFIG_SMP
+
+/*
+ * SMP slave cpus entry point.	Board specific code for bootstrap calls this
+ * function after setting up the stack and tp registers.
+ */
+SYM_CODE_START(smpboot_entry)
+	li.d		t0, CSR_DMW0_INIT	# UC, PLV0
+	csrwr		t0, LOONGARCH_CSR_DMWIN0
+	li.d		t0, CSR_DMW1_INIT	# CA, PLV0
+	csrwr		t0, LOONGARCH_CSR_DMWIN1
+
+	la.abs		t0, 0f
+	jr		t0
+0:
+	/* Enable PG */
+	li.w		t0, 0xb0		# PLV=0, IE=0, PG=1
+	csrwr		t0, LOONGARCH_CSR_CRMD
+	li.w		t0, 0x04		# PLV=0, PIE=1, PWE=0
+	csrwr		t0, LOONGARCH_CSR_PRMD
+	li.w		t0, 0x00		# FPE=0, SXE=0, ASXE=0, BTE=0
+	csrwr		t0, LOONGARCH_CSR_EUEN
+
+	la.abs		t0, cpuboot_data
+	ld.d		sp, t0, CPU_BOOT_STACK
+	ld.d		tp, t0, CPU_BOOT_TINFO
+
+	bl		start_secondary
+	ASM_BUG()
+
+SYM_CODE_END(smpboot_entry)
+
+#endif /* CONFIG_SMP */
+
+SYM_ENTRY(kernel_entry_end, SYM_L_GLOBAL, SYM_A_NONE)