diff options
author | 2023-02-21 18:24:12 -0800 | |
---|---|---|
committer | 2023-02-21 18:24:12 -0800 | |
commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /arch/m68k/Kconfig.machine | |
download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'arch/m68k/Kconfig.machine')
-rw-r--r-- | arch/m68k/Kconfig.machine | 496 |
1 files changed, 496 insertions, 0 deletions
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine new file mode 100644 index 000000000..53c45ccda --- /dev/null +++ b/arch/m68k/Kconfig.machine @@ -0,0 +1,496 @@ +# SPDX-License-Identifier: GPL-2.0 +comment "Machine Types" + +if M68KCLASSIC + +config AMIGA + bool "Amiga support" + depends on MMU + select MMU_MOTOROLA if MMU + select LEGACY_TIMER_TICK + help + This option enables support for the Amiga series of computers. If + you plan to use this kernel on an Amiga, say Y here and browse the + material available in <file:Documentation/m68k>; otherwise say N. + +config ATARI + bool "Atari support" + depends on MMU + select MMU_MOTOROLA if MMU + select HAVE_ARCH_NVRAM_OPS + select LEGACY_TIMER_TICK + help + This option enables support for the 68000-based Atari series of + computers (including the TT, Falcon and Medusa). If you plan to use + this kernel on an Atari, say Y here and browse the material + available in <file:Documentation/m68k>; otherwise say N. + +config ATARI_KBD_CORE + bool + +config MAC + bool "Macintosh support" + depends on MMU + select MMU_MOTOROLA if MMU + select HAVE_ARCH_NVRAM_OPS + select HAVE_PATA_PLATFORM + select LEGACY_TIMER_TICK + help + This option enables support for the Apple Macintosh series of + computers. If you plan to use this kernel on a Mac, say Y here and + browse the documentation available at <http://www.mac.linux-m68k.org/>; + otherwise say N. + +config APOLLO + bool "Apollo support" + depends on MMU + select MMU_MOTOROLA if MMU + select LEGACY_TIMER_TICK + help + Say Y here if you want to run Linux on an MC680x0-based Apollo + Domain workstation such as the DN3500. + +config VME + bool "VME (Motorola and BVM) support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to build a kernel for a 680x0 based VME + board. Boards currently supported include Motorola boards MVME147, + MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and + BVME6000 boards from BVM Ltd are also supported. + +config MVME147 + bool "MVME147 support" + depends on MMU + depends on VME + select LEGACY_TIMER_TICK + help + Say Y to include support for early Motorola VME boards. This will + build a kernel which can run on MVME147 single-board computers. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config MVME16x + bool "MVME162, 166 and 167 support" + depends on MMU + depends on VME + select LEGACY_TIMER_TICK + help + Say Y to include support for Motorola VME boards. This will build a + kernel which can run on MVME162, MVME166, MVME167, MVME172, and + MVME177 boards. If you select this option you will have to select + the appropriate drivers for SCSI, Ethernet and serial ports later + on. + +config BVME6000 + bool "BVME4000 and BVME6000 support" + depends on MMU + depends on VME + select LEGACY_TIMER_TICK + help + Say Y to include support for VME boards from BVM Ltd. This will + build a kernel which can run on BVME4000 and BVME6000 boards. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config HP300 + bool "HP9000/300 and HP9000/400 support" + depends on MMU + select MMU_MOTOROLA if MMU + select LEGACY_TIMER_TICK + help + This option enables support for the HP9000/300 and HP9000/400 series + of workstations. Support for these machines is still somewhat + experimental. If you plan to try to use the kernel on such a machine + say Y here. + Everybody else says N. + +config SUN3X + bool "Sun3x support" + depends on MMU + select LEGACY_TIMER_TICK + select MMU_MOTOROLA if MMU + select M68030 + help + This option enables support for the Sun 3x series of workstations. + Be warned that this support is very experimental. + Note that Sun 3x kernels are not compatible with Sun 3 hardware. + General Linux information on the Sun 3x series (now discontinued) + is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. + + If you don't want to compile a kernel for a Sun 3x, say N. + +config Q40 + bool "Q40/Q60 support" + depends on MMU + select MMU_MOTOROLA if MMU + select LEGACY_TIMER_TICK + help + The Q40 is a Motorola 68040-based successor to the Sinclair QL + manufactured in Germany. There is an official Q40 home page at + <http://www.q40.de/>. This option enables support for the Q40 and + Q60. Select your CPU below. For 68LC060 don't forget to enable FPU + emulation. + +config SUN3 + bool "Sun3 support" + depends on MMU + depends on !MMU_MOTOROLA + select MMU_SUN3 if MMU + select LEGACY_TIMER_TICK + select NO_DMA + select M68020 + help + This option enables support for the Sun 3 series of workstations + (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires + that all other hardware types must be disabled, as Sun 3 kernels + are incompatible with all other m68k targets (including Sun 3x!). + + If you don't want to compile a kernel exclusively for a Sun 3, say N. + +config VIRT + bool "Virtual M68k Machine support" + depends on MMU + select GENERIC_CLOCKEVENTS + select GOLDFISH + select GOLDFISH_TIMER + select GOLDFISH_TTY + select M68040 + select MMU_MOTOROLA if MMU + select RTC_CLASS + select RTC_DRV_GOLDFISH + select TTY + select VIRTIO_MENU + select VIRTIO_MMIO + help + This options enable a pure virtual machine based on m68k, + VIRTIO MMIO devices and GOLDFISH interfaces (TTY, RTC, PIC). + +config PILOT + bool + +config PILOT3 + bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" + depends on !MMU + select M68328 + select PILOT + help + Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. + +config XCOPILOT_BUGS + bool "(X)Copilot support" + depends on PILOT3 + help + Support the bugs of Xcopilot. + +config UCSIMM + bool "uCsimm module support" + depends on !MMU + select M68EZ328 + help + Support for the Arcturus Networks uCsimm module. + +config UCDIMM + bool "uDsimm module support" + depends on !MMU + select M68VZ328 + help + Support for the Arcturus Networks uDsimm module. + +config DRAGEN2 + bool "DragenEngine II board support" + depends on !MMU + select M68VZ328 + help + Support for the DragenEngine II board. + +config DIRECT_IO_ACCESS + bool "Allow user to access IO directly" + depends on (UCSIMM || UCDIMM || DRAGEN2) + help + Disable the CPU internal registers protection in user mode, + to allow a user application to read/write them. + +config INIT_LCD + bool "Initialize LCD" + depends on (UCSIMM || UCDIMM || DRAGEN2) + help + Initialize the LCD controller of the 68x328 processor. + +config MEMORY_RESERVE + int "Memory reservation (MiB)" + depends on (UCSIMM || UCDIMM) + default 0 + help + Reserve certain memory regions on 68x328 based boards. + +endif # M68KCLASSIC + +config ARN5206 + bool "Arnewsh 5206 board support" + depends on M5206 + help + Support for the Arnewsh 5206 board. + +config M5206eC3 + bool "Motorola M5206eC3 board support" + depends on M5206e + help + Support for the Motorola M5206eC3 board. + +config ELITE + bool "Motorola M5206eLITE board support" + depends on M5206e + help + Support for the Motorola M5206eLITE board. + +config M5235EVB + bool "Freescale M5235EVB support" + depends on M523x + help + Support for the Freescale M5235EVB board. + +config M5249C3 + bool "Motorola M5249C3 board support" + depends on M5249 + help + Support for the Motorola M5249C3 board. + +config M5272C3 + bool "Motorola M5272C3 board support" + depends on M5272 + help + Support for the Motorola M5272C3 board. + +config WILDFIRE + bool "Intec Automation Inc. WildFire board support" + depends on M528x + help + Support for the Intec Automation Inc. WildFire. + +config WILDFIREMOD + bool "Intec Automation Inc. WildFire module support" + depends on M528x + help + Support for the Intec Automation Inc. WildFire module. + +config ARN5307 + bool "Arnewsh 5307 board support" + depends on M5307 + help + Support for the Arnewsh 5307 board. + +config M5307C3 + bool "Motorola M5307C3 board support" + depends on M5307 + help + Support for the Motorola M5307C3 board. + +config SECUREEDGEMP3 + bool "SnapGear SecureEdge/MP3 platform support" + depends on M5307 + help + Support for the SnapGear SecureEdge/MP3 platform. + +config M5407C3 + bool "Motorola M5407C3 board support" + depends on M5407 + help + Support for the Motorola M5407C3 board. + +config AMCORE + bool "Sysam AMCORE board support" + depends on M5307 + help + Support for the Sysam AMCORE open-hardware generic board. + +config STMARK2 + bool "Sysam stmark2 board support" + depends on M5441x + help + Support for the Sysam stmark2 open-hardware generic board. + +config FIREBEE + bool "FireBee board support" + depends on M547x + help + Support for the FireBee ColdFire 5475 based board. + +config CLEOPATRA + bool "Feith CLEOPATRA board support" + depends on (M5307 || M5407) + help + Support for the Feith Cleopatra boards. + +config CANCam + bool "Feith CANCam board support" + depends on M5272 + help + Support for the Feith CANCam board. + +config SCALES + bool "Feith SCALES board support" + depends on M5272 + help + Support for the Feith SCALES board. + +config NETtel + bool "SecureEdge/NETtel board support" + depends on (M5206e || M5272 || M5307) + help + Support for the SnapGear NETtel/SecureEdge/SnapGear boards. + +config MOD5272 + bool "Netburner MOD-5272 board support" + depends on M5272 + help + Support for the Netburner MOD-5272 board. + +if !MMU || COLDFIRE + +comment "Machine Options" + +config UBOOT + bool "Support for U-Boot command line parameters" + depends on COLDFIRE + help + If you say Y here kernel will try to collect command + line parameters from the initial u-boot stack. + +config 4KSTACKS + bool "Use 4Kb for kernel stacks instead of 8Kb" + default y + help + If you say Y here the kernel will use a 4Kb stacksize for the + kernel stack attached to each process/thread. This facilitates + running more threads on a system and also reduces the pressure + on the VM subsystem for higher order allocations. + +comment "RAM configuration" + +config RAMBASE + hex "Address of the base of RAM" + default "0" + help + Define the address that RAM starts at. On many platforms this is + 0, the base of the address space. And this is the default. Some + platforms choose to setup their RAM at other addresses within the + processor address space. + +config RAMSIZE + hex "Size of RAM (in bytes), or 0 for automatic" + default "0x400000" + help + Define the size of the system RAM. If you select 0 then the + kernel will try to probe the RAM size at runtime. This is not + supported on all CPU types. + +config VECTORBASE + hex "Address of the base of system vectors" + default "0" + help + Define the address of the system vectors. Commonly this is + put at the start of RAM, but it doesn't have to be. On ColdFire + platforms this address is programmed into the VBR register, thus + actually setting the address to use. + +config MBAR + hex "Address of the MBAR (internal peripherals)" + default "0x10000000" + depends on HAVE_MBAR + help + Define the address of the internal system peripherals. This value + is set in the processors MBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x10000000 value, so if unsure then + use this. + +config IPSBAR + hex "Address of the IPSBAR (internal peripherals)" + default "0x40000000" + depends on HAVE_IPSBAR + help + Define the address of the internal system peripherals. This value + is set in the processors IPSBAR register. This is generally setup by + the boot loader, and will not be written by the kernel. By far most + ColdFire boards use the default 0x40000000 value, so if unsure then + use this. + +config KERNELBASE + hex "Address of the base of kernel code" + default "0x400" + help + Typically on m68k systems the kernel will not start at the base + of RAM, but usually some small offset from it. Define the start + address of the kernel here. The most common setup will have the + processor vectors at the base of RAM and then the start of the + kernel. On some platforms some RAM is reserved for boot loaders + and the kernel starts after that. The 0x400 default was based on + a system with the RAM based at address 0, and leaving enough room + for the theoretical maximum number of 256 vectors. + +comment "ROM configuration" + +config ROM + bool "Specify ROM linker regions" + help + Define a ROM region for the linker script. This creates a kernel + that can be stored in flash, with possibly the text, and data + regions being copied out to RAM at startup. + +config ROMBASE + hex "Address of the base of ROM device" + default "0" + depends on ROM + help + Define the address that the ROM region starts at. Some platforms + use this to set their chip select region accordingly for the boot + device. + +config ROMVEC + hex "Address of the base of the ROM vectors" + default "0" + depends on ROM + help + This is almost always the same as the base of the ROM. Since on all + 68000 type variants the vectors are at the base of the boot device + on system startup. + +config ROMSTART + hex "Address of the base of system image in ROM" + default "0x400" + depends on ROM + help + Define the start address of the system image in ROM. Commonly this + is strait after the ROM vectors. + +config ROMSIZE + hex "Size of the ROM device" + default "0x100000" + depends on ROM + help + Size of the ROM device. On some platforms this is used to setup + the chip select that controls the boot ROM device. + +choice + prompt "Kernel executes from" + help + Choose the memory type that the kernel will be running in. + +config RAMKERNEL + bool "RAM" + help + The kernel will be resident in RAM when running. + +config ROMKERNEL + bool "ROM" + depends on ROM + help + The kernel will be resident in FLASH/ROM when running. This is + often referred to as Execute-in-Place (XIP), since the kernel + code executes from the position it is stored in the FLASH/ROM. + +endchoice + +endif # !MMU || COLDFIRE |