Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 391 insertions, 0 deletions

diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
new file mode 100644
index 000000000..56f02ea2c
--- /dev/null
+++ b/arch/m68k/atari/ataints.c
@@ -0,0 +1,391 @@
+/*
+ * arch/m68k/atari/ataints.c -- Atari Linux interrupt handling code
+ *
+ * 5/2/94 Roman Hodek:
+ *  Added support for TT interrupts; setup for TT SCU (may someone has
+ *  twiddled there and we won't get the right interrupts :-()
+ *
+ *  Major change: The device-independent code in m68k/ints.c didn't know
+ *  about non-autovec ints yet. It hardcoded the number of possible ints to
+ *  7 (IRQ1...IRQ7). But the Atari has lots of non-autovec ints! I made the
+ *  number of possible ints a constant defined in interrupt.h, which is
+ *  47 for the Atari. So we can call request_irq() for all Atari interrupts
+ *  just the normal way. Additionally, all vectors >= 48 are initialized to
+ *  call trap() instead of inthandler(). This must be changed here, too.
+ *
+ * 1995-07-16 Lars Brinkhoff <f93labr@dd.chalmers.se>:
+ *  Corrected a bug in atari_add_isr() which rejected all SCC
+ *  interrupt sources if there were no TT MFP!
+ *
+ * 12/13/95: New interface functions atari_level_triggered_int() and
+ *  atari_register_vme_int() as support for level triggered VME interrupts.
+ *
+ * 02/12/96: (Roman)
+ *  Total rewrite of Atari interrupt handling, for new scheme see comments
+ *  below.
+ *
+ * 1996-09-03 lars brinkhoff <f93labr@dd.chalmers.se>:
+ *  Added new function atari_unregister_vme_int(), and
+ *  modified atari_register_vme_int() as well as IS_VALID_INTNO()
+ *  to work with it.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/kernel_stat.h>
+#include <linux/init.h>
+#include <linux/seq_file.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include <asm/traps.h>
+
+#include <asm/atarihw.h>
+#include <asm/atariints.h>
+#include <asm/atari_stdma.h>
+#include <asm/irq.h>
+#include <asm/entry.h>
+#include <asm/io.h>
+
+
+/*
+ * Atari interrupt handling scheme:
+ * --------------------------------
+ *
+ * All interrupt source have an internal number (defined in
+ * <asm/atariints.h>): Autovector interrupts are 1..7, then follow ST-MFP,
+ * TT-MFP, SCC, and finally VME interrupts. Vector numbers for the latter can
+ * be allocated by atari_register_vme_int().
+ */
+
+/*
+ * Bitmap for free interrupt vector numbers
+ * (new vectors starting from 0x70 can be allocated by
+ * atari_register_vme_int())
+ */
+static int free_vme_vec_bitmap;
+
+/* GK:
+ * HBL IRQ handler for Falcon. Nobody needs it :-)
+ * ++andreas: raise ipl to disable further HBLANK interrupts.
+ */
+asmlinkage void falcon_hblhandler(void);
+asm(".text\n"
+__ALIGN_STR "\n\t"
+"falcon_hblhandler:\n\t"
+	"orw	#0x200,%sp@\n\t"	/* set saved ipl to 2 */
+	"rte");
+
+extern void atari_microwire_cmd(int cmd);
+
+static unsigned int atari_irq_startup(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
+	m68k_irq_startup(data);
+	atari_turnon_irq(irq);
+	atari_enable_irq(irq);
+	return 0;
+}
+
+static void atari_irq_shutdown(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+
+	atari_disable_irq(irq);
+	atari_turnoff_irq(irq);
+	m68k_irq_shutdown(data);
+
+	if (irq == IRQ_AUTO_4)
+	    vectors[VEC_INT4] = falcon_hblhandler;
+}
+
+static void atari_irq_enable(struct irq_data *data)
+{
+	atari_enable_irq(data->irq);
+}
+
+static void atari_irq_disable(struct irq_data *data)
+{
+	atari_disable_irq(data->irq);
+}
+
+static struct irq_chip atari_irq_chip = {
+	.name		= "atari",
+	.irq_startup	= atari_irq_startup,
+	.irq_shutdown	= atari_irq_shutdown,
+	.irq_enable	= atari_irq_enable,
+	.irq_disable	= atari_irq_disable,
+};
+
+/*
+ * ST-MFP timer D chained interrupts - each driver gets its own timer
+ * interrupt instance.
+ */
+
+struct mfptimerbase {
+	volatile struct MFP *mfp;
+	unsigned char mfp_mask, mfp_data;
+	unsigned short int_mask;
+	int handler_irq, mfptimer_irq, server_irq;
+	char *name;
+} stmfp_base = {
+	.mfp		= &st_mfp,
+	.int_mask	= 0x0,
+	.handler_irq	= IRQ_MFP_TIMD,
+	.mfptimer_irq	= IRQ_MFP_TIMER1,
+	.name		= "MFP Timer D"
+};
+
+static irqreturn_t mfp_timer_d_handler(int irq, void *dev_id)
+{
+	struct mfptimerbase *base = dev_id;
+	int mach_irq;
+	unsigned char ints;
+
+	mach_irq = base->mfptimer_irq;
+	ints = base->int_mask;
+	for (; ints; mach_irq++, ints >>= 1) {
+		if (ints & 1)
+			generic_handle_irq(mach_irq);
+	}
+	return IRQ_HANDLED;
+}
+
+
+static void atari_mfptimer_enable(struct irq_data *data)
+{
+	int mfp_num = data->irq - IRQ_MFP_TIMER1;
+	stmfp_base.int_mask |= 1 << mfp_num;
+	atari_enable_irq(IRQ_MFP_TIMD);
+}
+
+static void atari_mfptimer_disable(struct irq_data *data)
+{
+	int mfp_num = data->irq - IRQ_MFP_TIMER1;
+	stmfp_base.int_mask &= ~(1 << mfp_num);
+	if (!stmfp_base.int_mask)
+		atari_disable_irq(IRQ_MFP_TIMD);
+}
+
+static struct irq_chip atari_mfptimer_chip = {
+	.name		= "timer_d",
+	.irq_enable	= atari_mfptimer_enable,
+	.irq_disable	= atari_mfptimer_disable,
+};
+
+
+/*
+ * EtherNAT CPLD interrupt handling
+ * CPLD interrupt register is at phys. 0x80000023
+ * Need this mapped in at interrupt startup time
+ * Possibly need this mapped on demand anyway -
+ * EtherNAT USB driver needs to disable IRQ before
+ * startup!
+ */
+
+static unsigned char *enat_cpld;
+
+static unsigned int atari_ethernat_startup(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+
+	m68k_irq_startup(data);
+	/*
+	* map CPLD interrupt register
+	*/
+	if (!enat_cpld)
+		enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+	/*
+	 * do _not_ enable the USB chip interrupt here - causes interrupt storm
+	 * and triggers dead interrupt watchdog
+	 * Need to reset the USB chip to a sane state in early startup before
+	 * removing this hack
+	 */
+	if (enat_num == 1)
+		*enat_cpld |= 1 << enat_num;
+
+	return 0;
+}
+
+static void atari_ethernat_enable(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+	/*
+	* map CPLD interrupt register
+	*/
+	if (!enat_cpld)
+		enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+	*enat_cpld |= 1 << enat_num;
+}
+
+static void atari_ethernat_disable(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+	/*
+	* map CPLD interrupt register
+	*/
+	if (!enat_cpld)
+		enat_cpld = (unsigned char *)ioremap((ATARI_ETHERNAT_PHYS_ADDR+0x23), 0x2);
+	*enat_cpld &= ~(1 << enat_num);
+}
+
+static void atari_ethernat_shutdown(struct irq_data *data)
+{
+	int enat_num = 140 - data->irq + 1;
+	if (enat_cpld) {
+		*enat_cpld &= ~(1 << enat_num);
+		iounmap(enat_cpld);
+		enat_cpld = NULL;
+	}
+}
+
+static struct irq_chip atari_ethernat_chip = {
+	.name		= "ethernat",
+	.irq_startup	= atari_ethernat_startup,
+	.irq_shutdown	= atari_ethernat_shutdown,
+	.irq_enable	= atari_ethernat_enable,
+	.irq_disable	= atari_ethernat_disable,
+};
+
+/*
+ * void atari_init_IRQ (void)
+ *
+ * Parameters:	None
+ *
+ * Returns:	Nothing
+ *
+ * This function should be called during kernel startup to initialize
+ * the atari IRQ handling routines.
+ */
+
+void __init atari_init_IRQ(void)
+{
+	m68k_setup_user_interrupt(VEC_USER, NUM_ATARI_SOURCES - IRQ_USER);
+	m68k_setup_irq_controller(&atari_irq_chip, handle_simple_irq, 1,
+				  NUM_ATARI_SOURCES - 1);
+
+	/* Initialize the MFP(s) */
+
+#ifdef ATARI_USE_SOFTWARE_EOI
+	st_mfp.vec_adr  = 0x48;	/* Software EOI-Mode */
+#else
+	st_mfp.vec_adr  = 0x40;	/* Automatic EOI-Mode */
+#endif
+	st_mfp.int_en_a = 0x00;	/* turn off MFP-Ints */
+	st_mfp.int_en_b = 0x00;
+	st_mfp.int_mk_a = 0xff;	/* no Masking */
+	st_mfp.int_mk_b = 0xff;
+
+	if (ATARIHW_PRESENT(TT_MFP)) {
+#ifdef ATARI_USE_SOFTWARE_EOI
+		tt_mfp.vec_adr  = 0x58;		/* Software EOI-Mode */
+#else
+		tt_mfp.vec_adr  = 0x50;		/* Automatic EOI-Mode */
+#endif
+		tt_mfp.int_en_a = 0x00;		/* turn off MFP-Ints */
+		tt_mfp.int_en_b = 0x00;
+		tt_mfp.int_mk_a = 0xff;		/* no Masking */
+		tt_mfp.int_mk_b = 0xff;
+	}
+
+	if (ATARIHW_PRESENT(SCC) && !atari_SCC_reset_done) {
+		atari_scc.cha_a_ctrl = 9;
+		MFPDELAY();
+		atari_scc.cha_a_ctrl = (char) 0xc0; /* hardware reset */
+	}
+
+	if (ATARIHW_PRESENT(SCU)) {
+		/* init the SCU if present */
+		tt_scu.sys_mask = 0x10;		/* enable VBL (for the cursor) and
+									 * disable HSYNC interrupts (who
+									 * needs them?)  MFP and SCC are
+									 * enabled in VME mask
+									 */
+		tt_scu.vme_mask = 0x60;		/* enable MFP and SCC ints */
+	} else {
+		/* If no SCU and no Hades, the HSYNC interrupt needs to be
+		 * disabled this way. (Else _inthandler in kernel/sys_call.S
+		 * gets overruns)
+		 */
+
+		vectors[VEC_INT2] = falcon_hblhandler;
+		vectors[VEC_INT4] = falcon_hblhandler;
+	}
+
+	if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
+		/* Initialize the LM1992 Sound Controller to enable
+		   the PSG sound.  This is misplaced here, it should
+		   be in an atasound_init(), that doesn't exist yet. */
+		atari_microwire_cmd(MW_LM1992_PSG_HIGH);
+	}
+
+	stdma_init();
+
+	/* Initialize the PSG: all sounds off, both ports output */
+	sound_ym.rd_data_reg_sel = 7;
+	sound_ym.wd_data = 0xff;
+
+	m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq,
+				  IRQ_MFP_TIMER1, 8);
+
+	irq_set_status_flags(IRQ_MFP_TIMER1, IRQ_IS_POLLED);
+	irq_set_status_flags(IRQ_MFP_TIMER2, IRQ_IS_POLLED);
+
+	/* prepare timer D data for use as poll interrupt */
+	/* set Timer D data Register - needs to be > 0 */
+	st_mfp.tim_dt_d = 254;	/* < 100 Hz */
+	/* start timer D, div = 1:100 */
+	st_mfp.tim_ct_cd = (st_mfp.tim_ct_cd & 0xf0) | 0x6;
+
+	/* request timer D dispatch handler */
+	if (request_irq(IRQ_MFP_TIMD, mfp_timer_d_handler, IRQF_SHARED,
+			stmfp_base.name, &stmfp_base))
+		pr_err("Couldn't register %s interrupt\n", stmfp_base.name);
+
+	/*
+	 * EtherNAT ethernet / USB interrupt handlers
+	 */
+
+	m68k_setup_irq_controller(&atari_ethernat_chip, handle_simple_irq,
+				  139, 2);
+}
+
+
+/*
+ * atari_register_vme_int() returns the number of a free interrupt vector for
+ * hardware with a programmable int vector (probably a VME board).
+ */
+
+unsigned int atari_register_vme_int(void)
+{
+	int i;
+
+	for (i = 0; i < 32; i++)
+		if ((free_vme_vec_bitmap & (1 << i)) == 0)
+			break;
+
+	if (i == 16)
+		return 0;
+
+	free_vme_vec_bitmap |= 1 << i;
+	return VME_SOURCE_BASE + i;
+}
+EXPORT_SYMBOL(atari_register_vme_int);
+
+
+void atari_unregister_vme_int(unsigned int irq)
+{
+	if (irq >= VME_SOURCE_BASE && irq < VME_SOURCE_BASE + VME_MAX_SOURCES) {
+		irq -= VME_SOURCE_BASE;
+		free_vme_vec_bitmap &= ~(1 << irq);
+	}
+}
+EXPORT_SYMBOL(atari_unregister_vme_int);
+
+