Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 213 insertions, 0 deletions

diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
new file mode 100644
index 000000000..8b3da5624
--- /dev/null
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -0,0 +1,213 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/****************************************************************************/
+
+/*
+ *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+#define	CPU_NAME		"COLDFIRE(m520x)"
+#define	CPU_INSTR_PER_JIFFY	3
+#define	MCF_BUSCLK		(MCF_CLK / 2)
+
+#include <asm/m52xxacr.h>
+
+/*
+ *  Define the 520x SIM register set addresses.
+ */
+#define MCFICM_INTC0        0xFC048000  /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_SIMR        0x1c        /* Set interrupt mask 0-63 */
+#define MCFINTC_CIMR        0x1d        /* Clear interrupt mask 0-63 */
+#define MCFINTC_ICR0        0x40        /* Base ICR register */
+
+/*
+ *  The common interrupt controller code just wants to know the absolute
+ *  address to the SIMR and CIMR registers (not offsets into IPSBAR).
+ *  The 520x family only has a single INTC unit.
+ */
+#define MCFINTC0_SIMR       (MCFICM_INTC0 + MCFINTC_SIMR)
+#define MCFINTC0_CIMR       (MCFICM_INTC0 + MCFINTC_CIMR)
+#define	MCFINTC0_ICR0       (MCFICM_INTC0 + MCFINTC_ICR0)
+#define MCFINTC1_SIMR       (0)
+#define MCFINTC1_CIMR       (0)
+#define	MCFINTC1_ICR0       (0)
+#define MCFINTC2_SIMR       (0)
+#define MCFINTC2_CIMR       (0)
+#define MCFINTC2_ICR0       (0)
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+#define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_I2C0         30          /* Interrupt number for I2C */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_FECRX0	    36		/* Interrupt number for FEC RX */
+#define MCFINT_FECTX0	    40		/* Interrupt number for FEC RX */
+#define MCFINT_FECENTC0	    42		/* Interrupt number for FEC RX */
+#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
+
+#define MCF_IRQ_UART0	    (MCFINT_VECBASE + MCFINT_UART0)
+#define MCF_IRQ_UART1	    (MCFINT_VECBASE + MCFINT_UART1)
+#define MCF_IRQ_UART2	    (MCFINT_VECBASE + MCFINT_UART2)
+
+#define MCF_IRQ_FECRX0	    (MCFINT_VECBASE + MCFINT_FECRX0)
+#define MCF_IRQ_FECTX0	    (MCFINT_VECBASE + MCFINT_FECTX0)
+#define MCF_IRQ_FECENTC0    (MCFINT_VECBASE + MCFINT_FECENTC0)
+
+#define	MCF_IRQ_QSPI	    (MCFINT_VECBASE + MCFINT_QSPI)
+#define MCF_IRQ_PIT1        (MCFINT_VECBASE + MCFINT_PIT1)
+
+#define MCF_IRQ_I2C0        (MCFINT_VECBASE + MCFINT_I2C0)
+/*
+ *  SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR         0xFC0a8000	/* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0xFC0a8004	/* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0xFC0a8008	/* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0xFC0a800c	/* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0xFC0a8110	/* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0xFC0a8114	/* SDRAM Chip Select 1 Configuration */
+
+/*
+ * EPORT and GPIO registers.
+ */
+#define MCFEPORT_EPPAR			0xFC088000
+#define MCFEPORT_EPDDR			0xFC088002
+#define MCFEPORT_EPIER			0xFC088003
+#define MCFEPORT_EPDR			0xFC088004
+#define MCFEPORT_EPPDR			0xFC088005
+#define MCFEPORT_EPFR			0xFC088006
+
+#define MCFGPIO_PODR_BUSCTL		0xFC0A4000
+#define MCFGPIO_PODR_BE			0xFC0A4001
+#define MCFGPIO_PODR_CS			0xFC0A4002
+#define MCFGPIO_PODR_FECI2C		0xFC0A4003
+#define MCFGPIO_PODR_QSPI		0xFC0A4004
+#define MCFGPIO_PODR_TIMER		0xFC0A4005
+#define MCFGPIO_PODR_UART		0xFC0A4006
+#define MCFGPIO_PODR_FECH		0xFC0A4007
+#define MCFGPIO_PODR_FECL		0xFC0A4008
+
+#define MCFGPIO_PDDR_BUSCTL		0xFC0A400C
+#define MCFGPIO_PDDR_BE			0xFC0A400D
+#define MCFGPIO_PDDR_CS			0xFC0A400E
+#define MCFGPIO_PDDR_FECI2C		0xFC0A400F
+#define MCFGPIO_PDDR_QSPI		0xFC0A4010
+#define MCFGPIO_PDDR_TIMER		0xFC0A4011
+#define MCFGPIO_PDDR_UART		0xFC0A4012
+#define MCFGPIO_PDDR_FECH		0xFC0A4013
+#define MCFGPIO_PDDR_FECL		0xFC0A4014
+
+#define MCFGPIO_PPDSDR_CS		0xFC0A401A
+#define MCFGPIO_PPDSDR_FECI2C		0xFC0A401B
+#define MCFGPIO_PPDSDR_QSPI		0xFC0A401C
+#define MCFGPIO_PPDSDR_TIMER		0xFC0A401D
+#define MCFGPIO_PPDSDR_UART		0xFC0A401E
+#define MCFGPIO_PPDSDR_FECH		0xFC0A401F
+#define MCFGPIO_PPDSDR_FECL		0xFC0A4020
+
+#define MCFGPIO_PCLRR_BUSCTL		0xFC0A4024
+#define MCFGPIO_PCLRR_BE		0xFC0A4025
+#define MCFGPIO_PCLRR_CS		0xFC0A4026
+#define MCFGPIO_PCLRR_FECI2C		0xFC0A4027
+#define MCFGPIO_PCLRR_QSPI		0xFC0A4028
+#define MCFGPIO_PCLRR_TIMER		0xFC0A4029
+#define MCFGPIO_PCLRR_UART		0xFC0A402A
+#define MCFGPIO_PCLRR_FECH		0xFC0A402B
+#define MCFGPIO_PCLRR_FECL		0xFC0A402C
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PODR			MCFGPIO_PODR_CS
+#define MCFGPIO_PDDR			MCFGPIO_PDDR_CS
+#define MCFGPIO_PPDR			MCFGPIO_PPDSDR_CS
+#define MCFGPIO_SETR			MCFGPIO_PPDSDR_CS
+#define MCFGPIO_CLRR			MCFGPIO_PCLRR_CS
+
+#define MCFGPIO_PIN_MAX			80
+#define MCFGPIO_IRQ_MAX			8
+#define MCFGPIO_IRQ_VECBASE		MCFINT_VECBASE
+
+#define MCF_GPIO_PAR_UART		0xFC0A4036
+#define MCF_GPIO_PAR_FECI2C		0xFC0A4033
+#define MCF_GPIO_PAR_QSPI		0xFC0A4034
+#define MCF_GPIO_PAR_FEC		0xFC0A4038
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
+
+/*
+ *  PIT timer module.
+ */
+#define	MCFPIT_BASE1		0xFC080000	/* Base address of TIMER1 */
+#define	MCFPIT_BASE2		0xFC084000	/* Base address of TIMER2 */
+
+/*
+ *  UART module.
+ */
+#define MCFUART_BASE0		0xFC060000	/* Base address of UART0 */
+#define MCFUART_BASE1		0xFC064000	/* Base address of UART1 */
+#define MCFUART_BASE2		0xFC068000	/* Base address of UART2 */
+
+/*
+ *  FEC module.
+ */
+#define	MCFFEC_BASE0		0xFC030000	/* Base of FEC ethernet */
+#define	MCFFEC_SIZE0		0x800		/* Register set size */
+
+/*
+ *  QSPI module.
+ */
+#define	MCFQSPI_BASE		0xFC05C000	/* Base of QSPI module */
+#define	MCFQSPI_SIZE		0x40		/* Register set size */
+
+#define	MCFQSPI_CS0		46
+#define	MCFQSPI_CS1		47
+#define	MCFQSPI_CS2		27
+
+/*
+ *  Reset Control Unit.
+ */
+#define	MCF_RCR			0xFC0A0000
+#define	MCF_RSR			0xFC0A0001
+
+#define	MCF_RCR_SWRESET		0x80		/* Software reset bit */
+#define	MCF_RCR_FRCSTOUT	0x40		/* Force external reset */
+
+/*
+ *  Power Management.
+ */
+#define MCFPM_WCR		0xfc040013
+#define MCFPM_PPMSR0		0xfc04002c
+#define MCFPM_PPMCR0		0xfc04002d
+#define MCFPM_PPMHR0		0xfc040030
+#define MCFPM_PPMLR0		0xfc040034
+#define MCFPM_LPCR		0xfc0a0007
+
+/*
+ * I2C module.
+ */
+#define MCFI2C_BASE0		0xFC058000
+#define MCFI2C_SIZE0		0x40
+
+/****************************************************************************/
+#endif  /* m520xsim_h */