Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 309 insertions, 0 deletions

diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h
new file mode 100644
index 000000000..de01b701d
--- /dev/null
+++ b/arch/m68k/include/asm/m525xsim.h
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/****************************************************************************/
+
+/*
+ *	m525xsim.h -- ColdFire 525x System Integration Module support.
+ *
+ *	(C) Copyright 2012, Steven king <sfking@fdwdc.com>
+ *	(C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef	m525xsim_h
+#define m525xsim_h
+/****************************************************************************/
+
+/*
+ *	This header supports ColdFire 5249, 5251 and 5253. There are a few
+ *	little differences between them, but most of the peripheral support
+ *	can be used by all of them.
+ */
+#define CPU_NAME		"COLDFIRE(m525x)"
+#define CPU_INSTR_PER_JIFFY	3
+#define MCF_BUSCLK		(MCF_CLK / 2)
+
+#include <asm/m52xxacr.h>
+
+/*
+ *	The 525x has a second MBAR region, define its address.
+ */
+#define MCF_MBAR2		0x80000000
+
+/*
+ *	Define the 525x SIM register set addresses.
+ */
+#define MCFSIM_RSR		(MCF_MBAR + 0x00)	/* Reset Status */
+#define MCFSIM_SYPCR		(MCF_MBAR + 0x01)	/* System Protection */
+#define MCFSIM_SWIVR		(MCF_MBAR + 0x02)	/* SW Watchdog intr */
+#define MCFSIM_SWSR		(MCF_MBAR + 0x03)	/* SW Watchdog srv */
+#define MCFSIM_MPARK		(MCF_MBAR + 0x0C)	/* BUS Master Ctrl */
+#define MCFSIM_IPR		(MCF_MBAR + 0x40)	/* Interrupt Pending */
+#define MCFSIM_IMR		(MCF_MBAR + 0x44)	/* Interrupt Mask */
+#define MCFSIM_ICR0		(MCF_MBAR + 0x4c)	/* Intr Ctrl reg 0 */
+#define MCFSIM_ICR1		(MCF_MBAR + 0x4d)	/* Intr Ctrl reg 1 */
+#define MCFSIM_ICR2		(MCF_MBAR + 0x4e)	/* Intr Ctrl reg 2 */
+#define MCFSIM_ICR3		(MCF_MBAR + 0x4f)	/* Intr Ctrl reg 3 */
+#define MCFSIM_ICR4		(MCF_MBAR + 0x50)	/* Intr Ctrl reg 4 */
+#define MCFSIM_ICR5		(MCF_MBAR + 0x51)	/* Intr Ctrl reg 5 */
+#define MCFSIM_ICR6		(MCF_MBAR + 0x52)	/* Intr Ctrl reg 6 */
+#define MCFSIM_ICR7		(MCF_MBAR + 0x53)	/* Intr Ctrl reg 7 */
+#define MCFSIM_ICR8		(MCF_MBAR + 0x54)	/* Intr Ctrl reg 8 */
+#define MCFSIM_ICR9		(MCF_MBAR + 0x55)	/* Intr Ctrl reg 9 */
+#define MCFSIM_ICR10		(MCF_MBAR + 0x56)	/* Intr Ctrl reg 10 */
+#define MCFSIM_ICR11		(MCF_MBAR + 0x57)	/* Intr Ctrl reg 11 */
+
+#define MCFSIM_CSAR0		(MCF_MBAR + 0x80)	/* CS 0 Address reg */
+#define MCFSIM_CSMR0		(MCF_MBAR + 0x84)	/* CS 0 Mask reg */
+#define MCFSIM_CSCR0		(MCF_MBAR + 0x8a)	/* CS 0 Control reg */
+#define MCFSIM_CSAR1		(MCF_MBAR + 0x8c)	/* CS 1 Address reg */
+#define MCFSIM_CSMR1		(MCF_MBAR + 0x90)	/* CS 1 Mask reg */
+#define MCFSIM_CSCR1		(MCF_MBAR + 0x96)	/* CS 1 Control reg */
+#define MCFSIM_CSAR2		(MCF_MBAR + 0x98)	/* CS 2 Address reg */
+#define MCFSIM_CSMR2		(MCF_MBAR + 0x9c)	/* CS 2 Mask reg */
+#define MCFSIM_CSCR2		(MCF_MBAR + 0xa2)	/* CS 2 Control reg */
+#define MCFSIM_CSAR3		(MCF_MBAR + 0xa4)	/* CS 3 Address reg */
+#define MCFSIM_CSMR3		(MCF_MBAR + 0xa8)	/* CS 3 Mask reg */
+#define MCFSIM_CSCR3		(MCF_MBAR + 0xae)	/* CS 3 Control reg */
+#define MCFSIM_CSAR4		(MCF_MBAR + 0xb0)	/* CS 4 Address reg */
+#define MCFSIM_CSMR4		(MCF_MBAR + 0xb4)	/* CS 4 Mask reg */
+#define MCFSIM_CSCR4		(MCF_MBAR + 0xba)	/* CS 4 Control reg */
+
+#define MCFSIM_DCR		(MCF_MBAR + 0x100)	/* DRAM Control */
+#define MCFSIM_DACR0		(MCF_MBAR + 0x108)	/* DRAM 0 Addr/Ctrl */
+#define MCFSIM_DMR0		(MCF_MBAR + 0x10c)	/* DRAM 0 Mask */
+#define MCFSIM_DACR1		(MCF_MBAR + 0x110)	/* DRAM 1 Addr/Ctrl */
+#define MCFSIM_DMR1		(MCF_MBAR + 0x114)	/* DRAM 1 Mask */
+
+/*
+ * Secondary Interrupt Controller (in MBAR2)
+*/
+#define MCFINTC2_INTBASE	(MCF_MBAR2 + 0x168)	/* Base Vector Reg */
+#define MCFINTC2_INTPRI1	(MCF_MBAR2 + 0x140)	/* 0-7 priority */
+#define MCFINTC2_INTPRI2	(MCF_MBAR2 + 0x144)	/* 8-15 priority */
+#define MCFINTC2_INTPRI3	(MCF_MBAR2 + 0x148)	/* 16-23 priority */
+#define MCFINTC2_INTPRI4	(MCF_MBAR2 + 0x14c)	/* 24-31 priority */
+#define MCFINTC2_INTPRI5	(MCF_MBAR2 + 0x150)	/* 32-39 priority */
+#define MCFINTC2_INTPRI6	(MCF_MBAR2 + 0x154)	/* 40-47 priority */
+#define MCFINTC2_INTPRI7	(MCF_MBAR2 + 0x158)	/* 48-55 priority */
+#define MCFINTC2_INTPRI8	(MCF_MBAR2 + 0x15c)	/* 56-63 priority */
+
+#define MCFINTC2_INTPRI_REG(i)	(MCFINTC2_INTPRI1 + \
+				((((i) - MCFINTC2_VECBASE) / 8) * 4))
+#define MCFINTC2_INTPRI_BITS(b, i)	((b) << (((i) % 8) * 4))
+
+/*
+ *	Timer module.
+ */
+#define MCFTIMER_BASE1		(MCF_MBAR + 0x140)	/* Base of TIMER1 */
+#define MCFTIMER_BASE2		(MCF_MBAR + 0x180)	/* Base of TIMER2 */
+
+/*
+ *	UART module.
+ */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
+
+/*
+ *	QSPI module.
+ */
+#define MCFQSPI_BASE		(MCF_MBAR + 0x400)	/* Base address QSPI */
+#define MCFQSPI_SIZE		0x40			/* Register set size */
+
+#ifdef CONFIG_M5249
+#define MCFQSPI_CS0		29
+#define MCFQSPI_CS1		24
+#define MCFQSPI_CS2		21
+#define MCFQSPI_CS3		22
+#else
+#define MCFQSPI_CS0		15
+#define MCFQSPI_CS1		16
+#define MCFQSPI_CS2		24
+#define MCFQSPI_CS3		28
+#endif
+
+/*
+ *	I2C module.
+ */
+#define MCFI2C_BASE0		(MCF_MBAR + 0x280)	/* Base address I2C0 */
+#define MCFI2C_SIZE0		0x20			/* Register set size */
+
+#define MCFI2C_BASE1		(MCF_MBAR2 + 0x440)	/* Base address I2C1 */
+#define MCFI2C_SIZE1		0x20			/* Register set size */
+
+/*
+ *	DMA unit base addresses.
+ */
+#define MCFDMA_BASE0		(MCF_MBAR + 0x300)	/* Base address DMA 0 */
+#define MCFDMA_BASE1		(MCF_MBAR + 0x340)	/* Base address DMA 1 */
+#define MCFDMA_BASE2		(MCF_MBAR + 0x380)	/* Base address DMA 2 */
+#define MCFDMA_BASE3		(MCF_MBAR + 0x3C0)	/* Base address DMA 3 */
+
+/*
+ *	Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR		MCFSIM_ICR0	/* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR	MCFSIM_ICR1	/* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR	MCFSIM_ICR2	/* Timer 2 ICR */
+#define MCFSIM_I2CICR		MCFSIM_ICR3	/* I2C ICR */
+#define MCFSIM_UART1ICR		MCFSIM_ICR4	/* UART 1 ICR */
+#define MCFSIM_UART2ICR		MCFSIM_ICR5	/* UART 2 ICR */
+#define MCFSIM_DMA0ICR		MCFSIM_ICR6	/* DMA 0 ICR */
+#define MCFSIM_DMA1ICR		MCFSIM_ICR7	/* DMA 1 ICR */
+#define MCFSIM_DMA2ICR		MCFSIM_ICR8	/* DMA 2 ICR */
+#define MCFSIM_DMA3ICR		MCFSIM_ICR9	/* DMA 3 ICR */
+#define MCFSIM_QSPIICR		MCFSIM_ICR10	/* QSPI ICR */
+
+/*
+ *	Define system peripheral IRQ usage.
+ */
+#define MCF_IRQ_QSPI		28		/* QSPI, Level 4 */
+#define MCF_IRQ_I2C0		29
+#define MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
+#define MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+
+#define MCF_IRQ_UART0		73		/* UART0 */
+#define MCF_IRQ_UART1		74		/* UART1 */
+
+/*
+ * Define the base interrupt for the second interrupt controller.
+ * We set it to 128, out of the way of the base interrupts, and plenty
+ * of room for its 64 interrupts.
+ */
+#define MCFINTC2_VECBASE	128
+
+#define MCF_IRQ_GPIO0		(MCFINTC2_VECBASE + 32)
+#define MCF_IRQ_GPIO1		(MCFINTC2_VECBASE + 33)
+#define MCF_IRQ_GPIO2		(MCFINTC2_VECBASE + 34)
+#define MCF_IRQ_GPIO3		(MCFINTC2_VECBASE + 35)
+#define MCF_IRQ_GPIO4		(MCFINTC2_VECBASE + 36)
+#define MCF_IRQ_GPIO5		(MCFINTC2_VECBASE + 37)
+#define MCF_IRQ_GPIO6		(MCFINTC2_VECBASE + 38)
+#define MCF_IRQ_GPIO7		(MCFINTC2_VECBASE + 39)
+
+#define MCF_IRQ_USBWUP		(MCFINTC2_VECBASE + 40)
+#define MCF_IRQ_I2C1		(MCFINTC2_VECBASE + 62)
+
+/*
+ *	General purpose IO registers (in MBAR2).
+ */
+#define MCFSIM2_GPIOREAD	(MCF_MBAR2 + 0x000)	/* GPIO read values */
+#define MCFSIM2_GPIOWRITE	(MCF_MBAR2 + 0x004)	/* GPIO write values */
+#define MCFSIM2_GPIOENABLE	(MCF_MBAR2 + 0x008)	/* GPIO enabled */
+#define MCFSIM2_GPIOFUNC	(MCF_MBAR2 + 0x00C)	/* GPIO function */
+#define MCFSIM2_GPIO1READ	(MCF_MBAR2 + 0x0B0)	/* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE	(MCF_MBAR2 + 0x0B4)	/* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE	(MCF_MBAR2 + 0x0B8)	/* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC	(MCF_MBAR2 + 0x0BC)	/* GPIO1 function */
+
+#define MCFSIM2_GPIOINTSTAT	(MCF_MBAR2 + 0xc0)	/* GPIO intr status */
+#define MCFSIM2_GPIOINTCLEAR	(MCF_MBAR2 + 0xc0)	/* GPIO intr clear */
+#define MCFSIM2_GPIOINTENABLE	(MCF_MBAR2 + 0xc4)	/* GPIO intr enable */
+
+#define MCFSIM2_DMAROUTE	(MCF_MBAR2 + 0x188)     /* DMA routing */
+#define MCFSIM2_IDECONFIG1	(MCF_MBAR2 + 0x18c)	/* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2	(MCF_MBAR2 + 0x190)	/* IDEconfig2 */
+
+/*
+ * Generic GPIO support
+ */
+#define MCFGPIO_PIN_MAX		64
+#ifdef CONFIG_M5249
+#define MCFGPIO_IRQ_MAX		-1
+#define MCFGPIO_IRQ_VECBASE	-1
+#else
+#define MCFGPIO_IRQ_MAX		7
+#define MCFGPIO_IRQ_VECBASE	MCF_IRQ_GPIO0
+#endif
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+#ifdef CONFIG_M5249C3
+/*
+ *	The M5249C3 board needs a little help getting all its SIM devices
+ *	initialized at kernel start time. dBUG doesn't set much up, so
+ *	we need to do it manually.
+ */
+.macro m5249c3_setup
+	/*
+	 *	Set MBAR1 and MBAR2, just incase they are not set.
+	 */
+	movel	#0x10000001,%a0
+	movec	%a0,%MBAR			/* map MBAR region */
+	subql	#1,%a0				/* get MBAR address in a0 */
+
+	movel	#0x80000001,%a1
+	movec	%a1,#3086			/* map MBAR2 region */
+	subql	#1,%a1				/* get MBAR2 address in a1 */
+
+	/*
+	 *      Move secondary interrupts to their base (128).
+	 */
+	moveb	#MCFINTC2_VECBASE,%d0
+	moveb	%d0,0x16b(%a1)			/* interrupt base register */
+
+	/*
+	 *      Work around broken CSMR0/DRAM vector problem.
+	 */
+	movel	#0x001F0021,%d0			/* disable C/I bit */
+	movel	%d0,0x84(%a0)			/* set CSMR0 */
+
+	/*
+	 *	Disable the PLL firstly. (Who knows what state it is
+	 *	in here!).
+	 */
+	movel	0x180(%a1),%d0			/* get current PLL value */
+	andl	#0xfffffffe,%d0			/* PLL bypass first */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+	/*
+	 *	Set initial clock frequency. This assumes M5249C3 board
+	 *	is fitted with 11.2896MHz crystal. It will program the
+	 *	PLL for 140MHz. Lets go fast :-)
+	 */
+	movel	#0x125a40f0,%d0			/* set for 140MHz */
+	movel	%d0,0x180(%a1)			/* set PLL register */
+	orl	#0x1,%d0
+	movel	%d0,0x180(%a1)			/* set PLL register */
+#endif
+
+	/*
+	 *	Setup CS1 for ethernet controller.
+	 *	(Setup as per M5249C3 doco).
+	 */
+	movel  #0xe0000000,%d0			/* CS1 mapped at 0xe0000000 */
+	movel  %d0,0x8c(%a0)
+	movel  #0x001f0021,%d0			/* CS1 size of 1Mb */
+	movel  %d0,0x90(%a0)
+	movew  #0x0080,%d0			/* CS1 = 16bit port, AA */
+	movew  %d0,0x96(%a0)
+
+	/*
+	 *	Setup CS2 for IDE interface.
+	 */
+	movel	#0x50000000,%d0			/* CS2 mapped at 0x50000000 */
+	movel	%d0,0x98(%a0)
+	movel	#0x001f0001,%d0			/* CS2 size of 1MB */
+	movel	%d0,0x9c(%a0)
+	movew	#0x0080,%d0			/* CS2 = 16bit, TA */
+	movew	%d0,0xa2(%a0)
+
+	movel	#0x00107000,%d0			/* IDEconfig1 */
+	movel	%d0,0x18c(%a1)
+	movel	#0x000c0400,%d0			/* IDEconfig2 */
+	movel	%d0,0x190(%a1)
+
+	movel	#0x00080000,%d0			/* GPIO19, IDE reset bit */
+	orl	%d0,0xc(%a1)			/* function GPIO19 */
+	orl	%d0,0x8(%a1)			/* enable GPIO19 as output */
+        orl	%d0,0x4(%a1)			/* de-assert IDE reset */
+.endm
+
+#define	PLATFORM_SETUP	m5249c3_setup
+
+#endif /* CONFIG_M5249C3 */
+#endif /* __ASSEMBLER__ */
+/****************************************************************************/
+#endif	/* m525xsim_h */