Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 658 insertions, 0 deletions

diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
new file mode 100644
index 000000000..ca83ada70
--- /dev/null
+++ b/arch/mips/include/asm/asmmacro.h
@@ -0,0 +1,658 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Ralf Baechle
+ */
+#ifndef _ASM_ASMMACRO_H
+#define _ASM_ASMMACRO_H
+
+#include <asm/hazards.h>
+#include <asm/asm-offsets.h>
+#include <asm/msa.h>
+
+#ifdef CONFIG_32BIT
+#include <asm/asmmacro-32.h>
+#endif
+#ifdef CONFIG_64BIT
+#include <asm/asmmacro-64.h>
+#endif
+
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
+/*
+ * Helper macros for generating raw instruction encodings.
+ */
+#ifdef CONFIG_CPU_MICROMIPS
+	.macro	insn32_if_mm enc
+	.insn
+	.hword ((\enc) >> 16)
+	.hword ((\enc) & 0xffff)
+	.endm
+
+	.macro	insn_if_mips enc
+	.endm
+#else
+	.macro	insn32_if_mm enc
+	.endm
+
+	.macro	insn_if_mips enc
+	.insn
+	.word (\enc)
+	.endm
+#endif
+
+#ifdef CONFIG_CPU_HAS_DIEI
+	.macro	local_irq_enable reg=t0
+	ei
+	irq_enable_hazard
+	.endm
+
+	.macro	local_irq_disable reg=t0
+	di
+	irq_disable_hazard
+	.endm
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
+	.macro	local_irq_enable reg=t0
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_enable_hazard
+	.endm
+
+	.macro	local_irq_disable reg=t0
+#ifdef CONFIG_PREEMPTION
+	lw      \reg, TI_PRE_COUNT($28)
+	addi    \reg, \reg, 1
+	sw      \reg, TI_PRE_COUNT($28)
+#endif
+	mfc0	\reg, CP0_STATUS
+	ori	\reg, \reg, 1
+	xori	\reg, \reg, 1
+	mtc0	\reg, CP0_STATUS
+	irq_disable_hazard
+#ifdef CONFIG_PREEMPTION
+	lw      \reg, TI_PRE_COUNT($28)
+	addi    \reg, \reg, -1
+	sw      \reg, TI_PRE_COUNT($28)
+#endif
+	.endm
+#endif  /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
+
+	.macro	fpu_save_16even thread tmp=t0
+	.set	push
+	SET_HARDFLOAT
+	cfc1	\tmp, fcr31
+	sdc1	$f0,  THREAD_FPR0(\thread)
+	sdc1	$f2,  THREAD_FPR2(\thread)
+	sdc1	$f4,  THREAD_FPR4(\thread)
+	sdc1	$f6,  THREAD_FPR6(\thread)
+	sdc1	$f8,  THREAD_FPR8(\thread)
+	sdc1	$f10, THREAD_FPR10(\thread)
+	sdc1	$f12, THREAD_FPR12(\thread)
+	sdc1	$f14, THREAD_FPR14(\thread)
+	sdc1	$f16, THREAD_FPR16(\thread)
+	sdc1	$f18, THREAD_FPR18(\thread)
+	sdc1	$f20, THREAD_FPR20(\thread)
+	sdc1	$f22, THREAD_FPR22(\thread)
+	sdc1	$f24, THREAD_FPR24(\thread)
+	sdc1	$f26, THREAD_FPR26(\thread)
+	sdc1	$f28, THREAD_FPR28(\thread)
+	sdc1	$f30, THREAD_FPR30(\thread)
+	sw	\tmp, THREAD_FCR31(\thread)
+	.set	pop
+	.endm
+
+	.macro	fpu_save_16odd thread
+	.set	push
+	.set	mips64r2
+	.set	fp=64
+	SET_HARDFLOAT
+	sdc1	$f1,  THREAD_FPR1(\thread)
+	sdc1	$f3,  THREAD_FPR3(\thread)
+	sdc1	$f5,  THREAD_FPR5(\thread)
+	sdc1	$f7,  THREAD_FPR7(\thread)
+	sdc1	$f9,  THREAD_FPR9(\thread)
+	sdc1	$f11, THREAD_FPR11(\thread)
+	sdc1	$f13, THREAD_FPR13(\thread)
+	sdc1	$f15, THREAD_FPR15(\thread)
+	sdc1	$f17, THREAD_FPR17(\thread)
+	sdc1	$f19, THREAD_FPR19(\thread)
+	sdc1	$f21, THREAD_FPR21(\thread)
+	sdc1	$f23, THREAD_FPR23(\thread)
+	sdc1	$f25, THREAD_FPR25(\thread)
+	sdc1	$f27, THREAD_FPR27(\thread)
+	sdc1	$f29, THREAD_FPR29(\thread)
+	sdc1	$f31, THREAD_FPR31(\thread)
+	.set	pop
+	.endm
+
+	.macro	fpu_save_double thread status tmp
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+    defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
+	sll	\tmp, \status, 5
+	bgez	\tmp, 10f
+	fpu_save_16odd \thread
+10:
+#endif
+	fpu_save_16even \thread \tmp
+	.endm
+
+	.macro	fpu_restore_16even thread tmp=t0
+	.set	push
+	SET_HARDFLOAT
+	lw	\tmp, THREAD_FCR31(\thread)
+	ldc1	$f0,  THREAD_FPR0(\thread)
+	ldc1	$f2,  THREAD_FPR2(\thread)
+	ldc1	$f4,  THREAD_FPR4(\thread)
+	ldc1	$f6,  THREAD_FPR6(\thread)
+	ldc1	$f8,  THREAD_FPR8(\thread)
+	ldc1	$f10, THREAD_FPR10(\thread)
+	ldc1	$f12, THREAD_FPR12(\thread)
+	ldc1	$f14, THREAD_FPR14(\thread)
+	ldc1	$f16, THREAD_FPR16(\thread)
+	ldc1	$f18, THREAD_FPR18(\thread)
+	ldc1	$f20, THREAD_FPR20(\thread)
+	ldc1	$f22, THREAD_FPR22(\thread)
+	ldc1	$f24, THREAD_FPR24(\thread)
+	ldc1	$f26, THREAD_FPR26(\thread)
+	ldc1	$f28, THREAD_FPR28(\thread)
+	ldc1	$f30, THREAD_FPR30(\thread)
+	ctc1	\tmp, fcr31
+	.set	pop
+	.endm
+
+	.macro	fpu_restore_16odd thread
+	.set	push
+	.set	mips64r2
+	.set	fp=64
+	SET_HARDFLOAT
+	ldc1	$f1,  THREAD_FPR1(\thread)
+	ldc1	$f3,  THREAD_FPR3(\thread)
+	ldc1	$f5,  THREAD_FPR5(\thread)
+	ldc1	$f7,  THREAD_FPR7(\thread)
+	ldc1	$f9,  THREAD_FPR9(\thread)
+	ldc1	$f11, THREAD_FPR11(\thread)
+	ldc1	$f13, THREAD_FPR13(\thread)
+	ldc1	$f15, THREAD_FPR15(\thread)
+	ldc1	$f17, THREAD_FPR17(\thread)
+	ldc1	$f19, THREAD_FPR19(\thread)
+	ldc1	$f21, THREAD_FPR21(\thread)
+	ldc1	$f23, THREAD_FPR23(\thread)
+	ldc1	$f25, THREAD_FPR25(\thread)
+	ldc1	$f27, THREAD_FPR27(\thread)
+	ldc1	$f29, THREAD_FPR29(\thread)
+	ldc1	$f31, THREAD_FPR31(\thread)
+	.set	pop
+	.endm
+
+	.macro	fpu_restore_double thread status tmp
+#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPSR2) || \
+    defined(CONFIG_CPU_MIPSR5) || defined(CONFIG_CPU_MIPSR6)
+	sll	\tmp, \status, 5
+	bgez	\tmp, 10f				# 16 register mode?
+
+	fpu_restore_16odd \thread
+10:
+#endif
+	fpu_restore_16even \thread \tmp
+	.endm
+
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \
+    defined(CONFIG_CPU_MIPSR6)
+	.macro	_EXT	rd, rs, p, s
+	ext	\rd, \rs, \p, \s
+	.endm
+#else /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
+	.macro	_EXT	rd, rs, p, s
+	srl	\rd, \rs, \p
+	andi	\rd, \rd, (1 << \s) - 1
+	.endm
+#endif /* !CONFIG_CPU_MIPSR2 && !CONFIG_CPU_MIPSR5 && !CONFIG_CPU_MIPSR6 */
+
+/*
+ * Temporary until all gas have MT ASE support
+ */
+	.macro	DMT	reg=0
+	.word	0x41600bc1 | (\reg << 16)
+	.endm
+
+	.macro	EMT	reg=0
+	.word	0x41600be1 | (\reg << 16)
+	.endm
+
+	.macro	DVPE	reg=0
+	.word	0x41600001 | (\reg << 16)
+	.endm
+
+	.macro	EVPE	reg=0
+	.word	0x41600021 | (\reg << 16)
+	.endm
+
+	.macro	MFTR	rt=0, rd=0, u=0, sel=0
+	 .word	0x41000000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.endm
+
+	.macro	MTTR	rt=0, rd=0, u=0, sel=0
+	 .word	0x41800000 | (\rt << 16) | (\rd << 11) | (\u << 5) | (\sel)
+	.endm
+
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+	.macro	_cfcmsa	rd, cs
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	cfcmsa	\rd, $\cs
+	.set	pop
+	.endm
+
+	.macro	_ctcmsa	cd, rs
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	ctcmsa	$\cd, \rs
+	.set	pop
+	.endm
+
+	.macro	ld_b	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	ld.b	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	ld_h	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	ld.h	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	ld_w	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	ld.w	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	ld_d	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	ld.d	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	st_b	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	st.b	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	st_h	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	st.h	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	st_w	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	st.w	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	st_d	wd, off, base
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	st.d	$w\wd, \off(\base)
+	.set	pop
+	.endm
+
+	.macro	copy_s_w	ws, n
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	copy_s.w $1, $w\ws[\n]
+	.set	pop
+	.endm
+
+	.macro	copy_s_d	ws, n
+	.set	push
+	.set	mips64r2
+	.set	fp=64
+	.set	msa
+	copy_s.d $1, $w\ws[\n]
+	.set	pop
+	.endm
+
+	.macro	insert_w	wd, n
+	.set	push
+	.set	mips32r2
+	.set	fp=64
+	.set	msa
+	insert.w $w\wd[\n], $1
+	.set	pop
+	.endm
+
+	.macro	insert_d	wd, n
+	.set	push
+	.set	mips64r2
+	.set	fp=64
+	.set	msa
+	insert.d $w\wd[\n], $1
+	.set	pop
+	.endm
+#else
+
+	/*
+	 * Temporary until all toolchains in use include MSA support.
+	 */
+	.macro	_cfcmsa	rd, cs
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	insn_if_mips 0x787e0059 | (\cs << 11)
+	insn32_if_mm 0x587e0056 | (\cs << 11)
+	move	\rd, $1
+	.set	pop
+	.endm
+
+	.macro	_ctcmsa	cd, rs
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	move	$1, \rs
+	insn_if_mips 0x783e0819 | (\cd << 6)
+	insn32_if_mm 0x583e0816 | (\cd << 6)
+	.set	pop
+	.endm
+
+	.macro	ld_b	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000820 | (\wd << 6)
+	insn32_if_mm 0x58000807 | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	ld_h	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000821 | (\wd << 6)
+	insn32_if_mm 0x58000817 | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	ld_w	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000822 | (\wd << 6)
+	insn32_if_mm 0x58000827 | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	ld_d	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000823 | (\wd << 6)
+	insn32_if_mm 0x58000837 | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	st_b	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000824 | (\wd << 6)
+	insn32_if_mm 0x5800080f | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	st_h	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000825 | (\wd << 6)
+	insn32_if_mm 0x5800081f | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	st_w	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000826 | (\wd << 6)
+	insn32_if_mm 0x5800082f | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	st_d	wd, off, base
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	PTR_ADDU $1, \base, \off
+	insn_if_mips 0x78000827 | (\wd << 6)
+	insn32_if_mm 0x5800083f | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	copy_s_w	ws, n
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	insn_if_mips 0x78b00059 | (\n << 16) | (\ws << 11)
+	insn32_if_mm 0x58b00056 | (\n << 16) | (\ws << 11)
+	.set	pop
+	.endm
+
+	.macro	copy_s_d	ws, n
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	insn_if_mips 0x78b80059 | (\n << 16) | (\ws << 11)
+	insn32_if_mm 0x58b80056 | (\n << 16) | (\ws << 11)
+	.set	pop
+	.endm
+
+	.macro	insert_w	wd, n
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	insn_if_mips 0x79300819 | (\n << 16) | (\wd << 6)
+	insn32_if_mm 0x59300816 | (\n << 16) | (\wd << 6)
+	.set	pop
+	.endm
+
+	.macro	insert_d	wd, n
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	insn_if_mips 0x79380819 | (\n << 16) | (\wd << 6)
+	insn32_if_mm 0x59380816 | (\n << 16) | (\wd << 6)
+	.set	pop
+	.endm
+#endif
+
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+#define FPR_BASE_OFFS	THREAD_FPR0
+#define FPR_BASE	$1
+#else
+#define FPR_BASE_OFFS	0
+#define FPR_BASE	\thread
+#endif
+
+	.macro	msa_save_all	thread
+	.set	push
+	.set	noat
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+	PTR_ADDU FPR_BASE, \thread, FPR_BASE_OFFS
+#endif
+	st_d	 0, THREAD_FPR0  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 1, THREAD_FPR1  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 2, THREAD_FPR2  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 3, THREAD_FPR3  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 4, THREAD_FPR4  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 5, THREAD_FPR5  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 6, THREAD_FPR6  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 7, THREAD_FPR7  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 8, THREAD_FPR8  - FPR_BASE_OFFS, FPR_BASE
+	st_d	 9, THREAD_FPR9  - FPR_BASE_OFFS, FPR_BASE
+	st_d	10, THREAD_FPR10 - FPR_BASE_OFFS, FPR_BASE
+	st_d	11, THREAD_FPR11 - FPR_BASE_OFFS, FPR_BASE
+	st_d	12, THREAD_FPR12 - FPR_BASE_OFFS, FPR_BASE
+	st_d	13, THREAD_FPR13 - FPR_BASE_OFFS, FPR_BASE
+	st_d	14, THREAD_FPR14 - FPR_BASE_OFFS, FPR_BASE
+	st_d	15, THREAD_FPR15 - FPR_BASE_OFFS, FPR_BASE
+	st_d	16, THREAD_FPR16 - FPR_BASE_OFFS, FPR_BASE
+	st_d	17, THREAD_FPR17 - FPR_BASE_OFFS, FPR_BASE
+	st_d	18, THREAD_FPR18 - FPR_BASE_OFFS, FPR_BASE
+	st_d	19, THREAD_FPR19 - FPR_BASE_OFFS, FPR_BASE
+	st_d	20, THREAD_FPR20 - FPR_BASE_OFFS, FPR_BASE
+	st_d	21, THREAD_FPR21 - FPR_BASE_OFFS, FPR_BASE
+	st_d	22, THREAD_FPR22 - FPR_BASE_OFFS, FPR_BASE
+	st_d	23, THREAD_FPR23 - FPR_BASE_OFFS, FPR_BASE
+	st_d	24, THREAD_FPR24 - FPR_BASE_OFFS, FPR_BASE
+	st_d	25, THREAD_FPR25 - FPR_BASE_OFFS, FPR_BASE
+	st_d	26, THREAD_FPR26 - FPR_BASE_OFFS, FPR_BASE
+	st_d	27, THREAD_FPR27 - FPR_BASE_OFFS, FPR_BASE
+	st_d	28, THREAD_FPR28 - FPR_BASE_OFFS, FPR_BASE
+	st_d	29, THREAD_FPR29 - FPR_BASE_OFFS, FPR_BASE
+	st_d	30, THREAD_FPR30 - FPR_BASE_OFFS, FPR_BASE
+	st_d	31, THREAD_FPR31 - FPR_BASE_OFFS, FPR_BASE
+	SET_HARDFLOAT
+	_cfcmsa	$1, MSA_CSR
+	sw	$1, THREAD_MSA_CSR(\thread)
+	.set	pop
+	.endm
+
+	.macro	msa_restore_all	thread
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	lw	$1, THREAD_MSA_CSR(\thread)
+	_ctcmsa	MSA_CSR, $1
+#ifdef TOOLCHAIN_SUPPORTS_MSA
+	PTR_ADDU FPR_BASE, \thread, FPR_BASE_OFFS
+#endif
+	ld_d	 0, THREAD_FPR0  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 1, THREAD_FPR1  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 2, THREAD_FPR2  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 3, THREAD_FPR3  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 4, THREAD_FPR4  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 5, THREAD_FPR5  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 6, THREAD_FPR6  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 7, THREAD_FPR7  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 8, THREAD_FPR8  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	 9, THREAD_FPR9  - FPR_BASE_OFFS, FPR_BASE
+	ld_d	10, THREAD_FPR10 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	11, THREAD_FPR11 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	12, THREAD_FPR12 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	13, THREAD_FPR13 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	14, THREAD_FPR14 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	15, THREAD_FPR15 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	16, THREAD_FPR16 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	17, THREAD_FPR17 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	18, THREAD_FPR18 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	19, THREAD_FPR19 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	20, THREAD_FPR20 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	21, THREAD_FPR21 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	22, THREAD_FPR22 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	23, THREAD_FPR23 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	24, THREAD_FPR24 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	25, THREAD_FPR25 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	26, THREAD_FPR26 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	27, THREAD_FPR27 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	28, THREAD_FPR28 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	29, THREAD_FPR29 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	30, THREAD_FPR30 - FPR_BASE_OFFS, FPR_BASE
+	ld_d	31, THREAD_FPR31 - FPR_BASE_OFFS, FPR_BASE
+	.set pop
+	.endm
+
+#undef FPR_BASE_OFFS
+#undef FPR_BASE
+
+	.macro	msa_init_upper wd
+#ifdef CONFIG_64BIT
+	insert_d \wd, 1
+#else
+	insert_w \wd, 2
+	insert_w \wd, 3
+#endif
+	.endm
+
+	.macro	msa_init_all_upper
+	.set	push
+	.set	noat
+	SET_HARDFLOAT
+	not	$1, zero
+	msa_init_upper	0
+	msa_init_upper	1
+	msa_init_upper	2
+	msa_init_upper	3
+	msa_init_upper	4
+	msa_init_upper	5
+	msa_init_upper	6
+	msa_init_upper	7
+	msa_init_upper	8
+	msa_init_upper	9
+	msa_init_upper	10
+	msa_init_upper	11
+	msa_init_upper	12
+	msa_init_upper	13
+	msa_init_upper	14
+	msa_init_upper	15
+	msa_init_upper	16
+	msa_init_upper	17
+	msa_init_upper	18
+	msa_init_upper	19
+	msa_init_upper	20
+	msa_init_upper	21
+	msa_init_upper	22
+	msa_init_upper	23
+	msa_init_upper	24
+	msa_init_upper	25
+	msa_init_upper	26
+	msa_init_upper	27
+	msa_init_upper	28
+	msa_init_upper	29
+	msa_init_upper	30
+	msa_init_upper	31
+	.set	pop
+	.endm
+
+#endif /* _ASM_ASMMACRO_H */