Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 373 insertions, 0 deletions

diff --git a/arch/mips/include/asm/mips-gic.h b/arch/mips/include/asm/mips-gic.h
new file mode 100644
index 000000000..084cac1c5
--- /dev/null
+++ b/arch/mips/include/asm/mips-gic.h
@@ -0,0 +1,373 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2017 Imagination Technologies
+ * Author: Paul Burton <paul.burton@mips.com>
+ */
+
+#ifndef __MIPS_ASM_MIPS_CPS_H__
+# error Please include asm/mips-cps.h rather than asm/mips-gic.h
+#endif
+
+#ifndef __MIPS_ASM_MIPS_GIC_H__
+#define __MIPS_ASM_MIPS_GIC_H__
+
+#include <linux/bitops.h>
+
+/* The base address of the GIC registers */
+extern void __iomem *mips_gic_base;
+
+/* Offsets from the GIC base address to various control blocks */
+#define MIPS_GIC_SHARED_OFS	0x00000
+#define MIPS_GIC_SHARED_SZ	0x08000
+#define MIPS_GIC_LOCAL_OFS	0x08000
+#define MIPS_GIC_LOCAL_SZ	0x04000
+#define MIPS_GIC_REDIR_OFS	0x0c000
+#define MIPS_GIC_REDIR_SZ	0x04000
+#define MIPS_GIC_USER_OFS	0x10000
+#define MIPS_GIC_USER_SZ	0x10000
+
+/* For read-only shared registers */
+#define GIC_ACCESSOR_RO(sz, off, name)					\
+	CPS_ACCESSOR_RO(gic, sz, MIPS_GIC_SHARED_OFS + off, name)
+
+/* For read-write shared registers */
+#define GIC_ACCESSOR_RW(sz, off, name)					\
+	CPS_ACCESSOR_RW(gic, sz, MIPS_GIC_SHARED_OFS + off, name)
+
+/* For read-only local registers */
+#define GIC_VX_ACCESSOR_RO(sz, off, name)				\
+	CPS_ACCESSOR_RO(gic, sz, MIPS_GIC_LOCAL_OFS + off, vl_##name)	\
+	CPS_ACCESSOR_RO(gic, sz, MIPS_GIC_REDIR_OFS + off, vo_##name)
+
+/* For read-write local registers */
+#define GIC_VX_ACCESSOR_RW(sz, off, name)				\
+	CPS_ACCESSOR_RW(gic, sz, MIPS_GIC_LOCAL_OFS + off, vl_##name)	\
+	CPS_ACCESSOR_RW(gic, sz, MIPS_GIC_REDIR_OFS + off, vo_##name)
+
+/* For read-only shared per-interrupt registers */
+#define GIC_ACCESSOR_RO_INTR_REG(sz, off, stride, name)			\
+static inline void __iomem *addr_gic_##name(unsigned int intr)		\
+{									\
+	return mips_gic_base + (off) + (intr * (stride));		\
+}									\
+									\
+static inline unsigned int read_gic_##name(unsigned int intr)		\
+{									\
+	BUILD_BUG_ON(sz != 32);						\
+	return __raw_readl(addr_gic_##name(intr));			\
+}
+
+/* For read-write shared per-interrupt registers */
+#define GIC_ACCESSOR_RW_INTR_REG(sz, off, stride, name)			\
+	GIC_ACCESSOR_RO_INTR_REG(sz, off, stride, name)			\
+									\
+static inline void write_gic_##name(unsigned int intr,			\
+				    unsigned int val)			\
+{									\
+	BUILD_BUG_ON(sz != 32);						\
+	__raw_writel(val, addr_gic_##name(intr));			\
+}
+
+/* For read-only local per-interrupt registers */
+#define GIC_VX_ACCESSOR_RO_INTR_REG(sz, off, stride, name)		\
+	GIC_ACCESSOR_RO_INTR_REG(sz, MIPS_GIC_LOCAL_OFS + off,		\
+				 stride, vl_##name)			\
+	GIC_ACCESSOR_RO_INTR_REG(sz, MIPS_GIC_REDIR_OFS + off,		\
+				 stride, vo_##name)
+
+/* For read-write local per-interrupt registers */
+#define GIC_VX_ACCESSOR_RW_INTR_REG(sz, off, stride, name)		\
+	GIC_ACCESSOR_RW_INTR_REG(sz, MIPS_GIC_LOCAL_OFS + off,		\
+				 stride, vl_##name)			\
+	GIC_ACCESSOR_RW_INTR_REG(sz, MIPS_GIC_REDIR_OFS + off,		\
+				 stride, vo_##name)
+
+/* For read-only shared bit-per-interrupt registers */
+#define GIC_ACCESSOR_RO_INTR_BIT(off, name)				\
+static inline void __iomem *addr_gic_##name(void)			\
+{									\
+	return mips_gic_base + (off);					\
+}									\
+									\
+static inline unsigned int read_gic_##name(unsigned int intr)		\
+{									\
+	void __iomem *addr = addr_gic_##name();				\
+	unsigned int val;						\
+									\
+	if (mips_cm_is64) {						\
+		addr += (intr / 64) * sizeof(uint64_t);			\
+		val = __raw_readq(addr) >> intr % 64;			\
+	} else {							\
+		addr += (intr / 32) * sizeof(uint32_t);			\
+		val = __raw_readl(addr) >> intr % 32;			\
+	}								\
+									\
+	return val & 0x1;						\
+}
+
+/* For read-write shared bit-per-interrupt registers */
+#define GIC_ACCESSOR_RW_INTR_BIT(off, name)				\
+	GIC_ACCESSOR_RO_INTR_BIT(off, name)				\
+									\
+static inline void write_gic_##name(unsigned int intr)			\
+{									\
+	void __iomem *addr = addr_gic_##name();				\
+									\
+	if (mips_cm_is64) {						\
+		addr += (intr / 64) * sizeof(uint64_t);			\
+		__raw_writeq(BIT(intr % 64), addr);			\
+	} else {							\
+		addr += (intr / 32) * sizeof(uint32_t);			\
+		__raw_writel(BIT(intr % 32), addr);			\
+	}								\
+}									\
+									\
+static inline void change_gic_##name(unsigned int intr,			\
+				     unsigned int val)			\
+{									\
+	void __iomem *addr = addr_gic_##name();				\
+									\
+	if (mips_cm_is64) {						\
+		uint64_t _val;						\
+									\
+		addr += (intr / 64) * sizeof(uint64_t);			\
+		_val = __raw_readq(addr);				\
+		_val &= ~BIT_ULL(intr % 64);				\
+		_val |= (uint64_t)val << (intr % 64);			\
+		__raw_writeq(_val, addr);				\
+	} else {							\
+		uint32_t _val;						\
+									\
+		addr += (intr / 32) * sizeof(uint32_t);			\
+		_val = __raw_readl(addr);				\
+		_val &= ~BIT(intr % 32);				\
+		_val |= val << (intr % 32);				\
+		__raw_writel(_val, addr);				\
+	}								\
+}
+
+/* For read-only local bit-per-interrupt registers */
+#define GIC_VX_ACCESSOR_RO_INTR_BIT(sz, off, name)			\
+	GIC_ACCESSOR_RO_INTR_BIT(sz, MIPS_GIC_LOCAL_OFS + off,		\
+				 vl_##name)				\
+	GIC_ACCESSOR_RO_INTR_BIT(sz, MIPS_GIC_REDIR_OFS + off,		\
+				 vo_##name)
+
+/* For read-write local bit-per-interrupt registers */
+#define GIC_VX_ACCESSOR_RW_INTR_BIT(sz, off, name)			\
+	GIC_ACCESSOR_RW_INTR_BIT(sz, MIPS_GIC_LOCAL_OFS + off,		\
+				 vl_##name)				\
+	GIC_ACCESSOR_RW_INTR_BIT(sz, MIPS_GIC_REDIR_OFS + off,		\
+				 vo_##name)
+
+/* GIC_SH_CONFIG - Information about the GIC configuration */
+GIC_ACCESSOR_RW(32, 0x000, config)
+#define GIC_CONFIG_COUNTSTOP		BIT(28)
+#define GIC_CONFIG_COUNTBITS		GENMASK(27, 24)
+#define GIC_CONFIG_NUMINTERRUPTS	GENMASK(23, 16)
+#define GIC_CONFIG_PVPS			GENMASK(6, 0)
+
+/* GIC_SH_COUNTER - Shared global counter value */
+GIC_ACCESSOR_RW(64, 0x010, counter)
+GIC_ACCESSOR_RW(32, 0x010, counter_32l)
+GIC_ACCESSOR_RW(32, 0x014, counter_32h)
+
+/* GIC_SH_POL_* - Configures interrupt polarity */
+GIC_ACCESSOR_RW_INTR_BIT(0x100, pol)
+#define GIC_POL_ACTIVE_LOW		0	/* when level triggered */
+#define GIC_POL_ACTIVE_HIGH		1	/* when level triggered */
+#define GIC_POL_FALLING_EDGE		0	/* when single-edge triggered */
+#define GIC_POL_RISING_EDGE		1	/* when single-edge triggered */
+
+/* GIC_SH_TRIG_* - Configures interrupts to be edge or level triggered */
+GIC_ACCESSOR_RW_INTR_BIT(0x180, trig)
+#define GIC_TRIG_LEVEL			0
+#define GIC_TRIG_EDGE			1
+
+/* GIC_SH_DUAL_* - Configures whether interrupts trigger on both edges */
+GIC_ACCESSOR_RW_INTR_BIT(0x200, dual)
+#define GIC_DUAL_SINGLE			0	/* when edge-triggered */
+#define GIC_DUAL_DUAL			1	/* when edge-triggered */
+
+/* GIC_SH_WEDGE - Write an 'edge', ie. trigger an interrupt */
+GIC_ACCESSOR_RW(32, 0x280, wedge)
+#define GIC_WEDGE_RW			BIT(31)
+#define GIC_WEDGE_INTR			GENMASK(7, 0)
+
+/* GIC_SH_RMASK_* - Reset/clear shared interrupt mask bits */
+GIC_ACCESSOR_RW_INTR_BIT(0x300, rmask)
+
+/* GIC_SH_SMASK_* - Set shared interrupt mask bits */
+GIC_ACCESSOR_RW_INTR_BIT(0x380, smask)
+
+/* GIC_SH_MASK_* - Read the current shared interrupt mask */
+GIC_ACCESSOR_RO_INTR_BIT(0x400, mask)
+
+/* GIC_SH_PEND_* - Read currently pending shared interrupts */
+GIC_ACCESSOR_RO_INTR_BIT(0x480, pend)
+
+/* GIC_SH_MAPx_PIN - Map shared interrupts to a particular CPU pin */
+GIC_ACCESSOR_RW_INTR_REG(32, 0x500, 0x4, map_pin)
+#define GIC_MAP_PIN_MAP_TO_PIN		BIT(31)
+#define GIC_MAP_PIN_MAP_TO_NMI		BIT(30)
+#define GIC_MAP_PIN_MAP			GENMASK(5, 0)
+
+/* GIC_SH_MAPx_VP - Map shared interrupts to a particular Virtual Processor */
+GIC_ACCESSOR_RW_INTR_REG(32, 0x2000, 0x20, map_vp)
+
+/* GIC_Vx_CTL - VP-level interrupt control */
+GIC_VX_ACCESSOR_RW(32, 0x000, ctl)
+#define GIC_VX_CTL_FDC_ROUTABLE		BIT(4)
+#define GIC_VX_CTL_SWINT_ROUTABLE	BIT(3)
+#define GIC_VX_CTL_PERFCNT_ROUTABLE	BIT(2)
+#define GIC_VX_CTL_TIMER_ROUTABLE	BIT(1)
+#define GIC_VX_CTL_EIC			BIT(0)
+
+/* GIC_Vx_PEND - Read currently pending local interrupts */
+GIC_VX_ACCESSOR_RO(32, 0x004, pend)
+
+/* GIC_Vx_MASK - Read the current local interrupt mask */
+GIC_VX_ACCESSOR_RO(32, 0x008, mask)
+
+/* GIC_Vx_RMASK - Reset/clear local interrupt mask bits */
+GIC_VX_ACCESSOR_RW(32, 0x00c, rmask)
+
+/* GIC_Vx_SMASK - Set local interrupt mask bits */
+GIC_VX_ACCESSOR_RW(32, 0x010, smask)
+
+/* GIC_Vx_*_MAP - Route local interrupts to the desired pins */
+GIC_VX_ACCESSOR_RW_INTR_REG(32, 0x040, 0x4, map)
+
+/* GIC_Vx_WD_MAP - Route the local watchdog timer interrupt */
+GIC_VX_ACCESSOR_RW(32, 0x040, wd_map)
+
+/* GIC_Vx_COMPARE_MAP - Route the local count/compare interrupt */
+GIC_VX_ACCESSOR_RW(32, 0x044, compare_map)
+
+/* GIC_Vx_TIMER_MAP - Route the local CPU timer (cp0 count/compare) interrupt */
+GIC_VX_ACCESSOR_RW(32, 0x048, timer_map)
+
+/* GIC_Vx_FDC_MAP - Route the local fast debug channel interrupt */
+GIC_VX_ACCESSOR_RW(32, 0x04c, fdc_map)
+
+/* GIC_Vx_PERFCTR_MAP - Route the local performance counter interrupt */
+GIC_VX_ACCESSOR_RW(32, 0x050, perfctr_map)
+
+/* GIC_Vx_SWINT0_MAP - Route the local software interrupt 0 */
+GIC_VX_ACCESSOR_RW(32, 0x054, swint0_map)
+
+/* GIC_Vx_SWINT1_MAP - Route the local software interrupt 1 */
+GIC_VX_ACCESSOR_RW(32, 0x058, swint1_map)
+
+/* GIC_Vx_OTHER - Configure access to other Virtual Processor registers */
+GIC_VX_ACCESSOR_RW(32, 0x080, other)
+#define GIC_VX_OTHER_VPNUM		GENMASK(5, 0)
+
+/* GIC_Vx_IDENT - Retrieve the local Virtual Processor's ID */
+GIC_VX_ACCESSOR_RO(32, 0x088, ident)
+#define GIC_VX_IDENT_VPNUM		GENMASK(5, 0)
+
+/* GIC_Vx_COMPARE - Value to compare with GIC_SH_COUNTER */
+GIC_VX_ACCESSOR_RW(64, 0x0a0, compare)
+
+/* GIC_Vx_EIC_SHADOW_SET_BASE - Set shadow register set for each interrupt */
+GIC_VX_ACCESSOR_RW_INTR_REG(32, 0x100, 0x4, eic_shadow_set)
+
+/**
+ * enum mips_gic_local_interrupt - GIC local interrupts
+ * @GIC_LOCAL_INT_WD: GIC watchdog timer interrupt
+ * @GIC_LOCAL_INT_COMPARE: GIC count/compare interrupt
+ * @GIC_LOCAL_INT_TIMER: CP0 count/compare interrupt
+ * @GIC_LOCAL_INT_PERFCTR: Performance counter interrupt
+ * @GIC_LOCAL_INT_SWINT0: Software interrupt 0
+ * @GIC_LOCAL_INT_SWINT1: Software interrupt 1
+ * @GIC_LOCAL_INT_FDC: Fast debug channel interrupt
+ * @GIC_NUM_LOCAL_INTRS: The number of local interrupts
+ *
+ * Enumerates interrupts provided by the GIC that are local to a VP.
+ */
+enum mips_gic_local_interrupt {
+	GIC_LOCAL_INT_WD,
+	GIC_LOCAL_INT_COMPARE,
+	GIC_LOCAL_INT_TIMER,
+	GIC_LOCAL_INT_PERFCTR,
+	GIC_LOCAL_INT_SWINT0,
+	GIC_LOCAL_INT_SWINT1,
+	GIC_LOCAL_INT_FDC,
+	GIC_NUM_LOCAL_INTRS
+};
+
+/**
+ * mips_gic_present() - Determine whether a GIC is present
+ *
+ * Determines whether a MIPS Global Interrupt Controller (GIC) is present in
+ * the system that the kernel is running on.
+ *
+ * Return true if a GIC is present, else false.
+ */
+static inline bool mips_gic_present(void)
+{
+	return IS_ENABLED(CONFIG_MIPS_GIC) && mips_gic_base;
+}
+
+/**
+ * mips_gic_vx_map_reg() - Return GIC_Vx_<intr>_MAP register offset
+ * @intr: A GIC local interrupt
+ *
+ * Determine the index of the GIC_VL_<intr>_MAP or GIC_VO_<intr>_MAP register
+ * within the block of GIC map registers. This is almost the same as the order
+ * of interrupts in the pending & mask registers, as used by enum
+ * mips_gic_local_interrupt, but moves the FDC interrupt & thus offsets the
+ * interrupts after it...
+ *
+ * Return: The map register index corresponding to @intr.
+ *
+ * The return value is suitable for use with the (read|write)_gic_v[lo]_map
+ * accessor functions.
+ */
+static inline unsigned int
+mips_gic_vx_map_reg(enum mips_gic_local_interrupt intr)
+{
+	/* WD, Compare & Timer are 1:1 */
+	if (intr <= GIC_LOCAL_INT_TIMER)
+		return intr;
+
+	/* FDC moves to after Timer... */
+	if (intr == GIC_LOCAL_INT_FDC)
+		return GIC_LOCAL_INT_TIMER + 1;
+
+	/* As a result everything else is offset by 1 */
+	return intr + 1;
+}
+
+/**
+ * gic_get_c0_compare_int() - Return cp0 count/compare interrupt virq
+ *
+ * Determine the virq number to use for the coprocessor 0 count/compare
+ * interrupt, which may be routed via the GIC.
+ *
+ * Returns the virq number or a negative error number.
+ */
+extern int gic_get_c0_compare_int(void);
+
+/**
+ * gic_get_c0_perfcount_int() - Return performance counter interrupt virq
+ *
+ * Determine the virq number to use for CPU performance counter interrupts,
+ * which may be routed via the GIC.
+ *
+ * Returns the virq number or a negative error number.
+ */
+extern int gic_get_c0_perfcount_int(void);
+
+/**
+ * gic_get_c0_fdc_int() - Return fast debug channel interrupt virq
+ *
+ * Determine the virq number to use for fast debug channel (FDC) interrupts,
+ * which may be routed via the GIC.
+ *
+ * Returns the virq number or a negative error number.
+ */
+extern int gic_get_c0_fdc_int(void);
+
+#endif /* __MIPS_ASM_MIPS_CPS_H__ */