Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 364 insertions, 0 deletions

diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
new file mode 100644
index 000000000..5c1d726c7
--- /dev/null
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -0,0 +1,364 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Cavium Networks
+ */
+#ifndef __ASM_OCTEON_OCTEON_H
+#define __ASM_OCTEON_OCTEON_H
+
+#include <asm/octeon/cvmx.h>
+#include <asm/bitfield.h>
+
+extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
+						uint64_t alignment,
+						uint64_t min_addr,
+						uint64_t max_addr,
+						int do_locking);
+extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
+				  int do_locking);
+extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
+					uint64_t min_addr, uint64_t max_addr,
+					int do_locking);
+extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
+					char *name);
+extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
+					      uint64_t max_addr, uint64_t align,
+					      char *name);
+extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
+						char *name);
+extern int octeon_bootmem_free_named(char *name);
+extern void octeon_bootmem_lock(void);
+extern void octeon_bootmem_unlock(void);
+
+extern int octeon_is_simulation(void);
+extern int octeon_is_pci_host(void);
+extern int octeon_usb_is_ref_clk(void);
+extern uint64_t octeon_get_clock_rate(void);
+extern u64 octeon_get_io_clock_rate(void);
+extern const char *octeon_board_type_string(void);
+extern const char *octeon_get_pci_interrupts(void);
+extern int octeon_get_southbridge_interrupt(void);
+extern int octeon_get_boot_coremask(void);
+extern int octeon_get_boot_num_arguments(void);
+extern const char *octeon_get_boot_argument(int arg);
+extern void octeon_user_io_init(void);
+
+extern void octeon_init_cvmcount(void);
+extern void octeon_setup_delays(void);
+extern void octeon_io_clk_delay(unsigned long);
+
+#define OCTEON_ARGV_MAX_ARGS	64
+#define OCTEON_SERIAL_LEN	20
+
+struct octeon_boot_descriptor {
+#ifdef __BIG_ENDIAN_BITFIELD
+	/* Start of block referenced by assembly code - do not change! */
+	uint32_t desc_version;
+	uint32_t desc_size;
+	uint64_t stack_top;
+	uint64_t heap_base;
+	uint64_t heap_end;
+	/* Only used by bootloader */
+	uint64_t entry_point;
+	uint64_t desc_vaddr;
+	/* End of This block referenced by assembly code - do not change! */
+	uint32_t exception_base_addr;
+	uint32_t stack_size;
+	uint32_t heap_size;
+	/* Argc count for application. */
+	uint32_t argc;
+	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
+
+#define	 BOOT_FLAG_INIT_CORE		(1 << 0)
+#define	 OCTEON_BL_FLAG_DEBUG		(1 << 1)
+#define	 OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
+	/* If set, use uart1 for console */
+#define	 OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
+	/* If set, use PCI console */
+#define	 OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
+	/* Call exit on break on serial port */
+#define	 OCTEON_BL_FLAG_BREAK		(1 << 5)
+
+	uint32_t flags;
+	uint32_t core_mask;
+	/* DRAM size in megabyes. */
+	uint32_t dram_size;
+	/* physical address of free memory descriptor block. */
+	uint32_t phy_mem_desc_addr;
+	/* used to pass flags from app to debugger. */
+	uint32_t debugger_flags_base_addr;
+	/* CPU clock speed, in hz. */
+	uint32_t eclock_hz;
+	/* DRAM clock speed, in hz. */
+	uint32_t dclock_hz;
+	/* SPI4 clock in hz. */
+	uint32_t spi_clock_hz;
+	uint16_t board_type;
+	uint8_t board_rev_major;
+	uint8_t board_rev_minor;
+	uint16_t chip_type;
+	uint8_t chip_rev_major;
+	uint8_t chip_rev_minor;
+	char board_serial_number[OCTEON_SERIAL_LEN];
+	uint8_t mac_addr_base[6];
+	uint8_t mac_addr_count;
+	uint64_t cvmx_desc_vaddr;
+#else
+	uint32_t desc_size;
+	uint32_t desc_version;
+	uint64_t stack_top;
+	uint64_t heap_base;
+	uint64_t heap_end;
+	/* Only used by bootloader */
+	uint64_t entry_point;
+	uint64_t desc_vaddr;
+	/* End of This block referenced by assembly code - do not change! */
+	uint32_t stack_size;
+	uint32_t exception_base_addr;
+	uint32_t argc;
+	uint32_t heap_size;
+	/*
+	 * Argc count for application.
+	 * Warning low bit scrambled in little-endian.
+	 */
+	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
+
+#define  BOOT_FLAG_INIT_CORE		(1 << 0)
+#define  OCTEON_BL_FLAG_DEBUG		(1 << 1)
+#define  OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
+	/* If set, use uart1 for console */
+#define  OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
+	/* If set, use PCI console */
+#define  OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
+	/* Call exit on break on serial port */
+#define  OCTEON_BL_FLAG_BREAK		(1 << 5)
+
+	uint32_t core_mask;
+	uint32_t flags;
+	/* physical address of free memory descriptor block. */
+	uint32_t phy_mem_desc_addr;
+	/* DRAM size in megabyes. */
+	uint32_t dram_size;
+	/* CPU clock speed, in hz. */
+	uint32_t eclock_hz;
+	/* used to pass flags from app to debugger. */
+	uint32_t debugger_flags_base_addr;
+	/* SPI4 clock in hz. */
+	uint32_t spi_clock_hz;
+	/* DRAM clock speed, in hz. */
+	uint32_t dclock_hz;
+	uint8_t chip_rev_minor;
+	uint8_t chip_rev_major;
+	uint16_t chip_type;
+	uint8_t board_rev_minor;
+	uint8_t board_rev_major;
+	uint16_t board_type;
+
+	uint64_t unused1[4]; /* Not even filled in by bootloader. */
+
+	uint64_t cvmx_desc_vaddr;
+#endif
+};
+
+union octeon_cvmemctl {
+	uint64_t u64;
+	struct {
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		__BITFIELD_FIELD(uint64_t tlbbist:1,
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		__BITFIELD_FIELD(uint64_t l1cbist:1,
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		__BITFIELD_FIELD(uint64_t l1dbist:1,
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		__BITFIELD_FIELD(uint64_t dcmbist:1,
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		__BITFIELD_FIELD(uint64_t ptgbist:1,
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		__BITFIELD_FIELD(uint64_t wbfbist:1,
+		/* Reserved */
+		__BITFIELD_FIELD(uint64_t reserved:17,
+		/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
+		 * This field selects between the TLB replacement policies:
+		 * bitmask LRU or NLU. Bitmask LRU maintains a mask of
+		 * recently used TLB entries and avoids them as new entries
+		 * are allocated. NLU simply guarantees that the next
+		 * allocation is not the last used TLB entry. */
+		__BITFIELD_FIELD(uint64_t tlbnlu:1,
+		/* OCTEON II - Selects the bit in the counter used for
+		 * releasing a PAUSE. This counter trips every 2(8+PAUSETIME)
+		 * cycles. If not already released, the cnMIPS II core will
+		 * always release a given PAUSE instruction within
+		 * 2(8+PAUSETIME). If the counter trip happens to line up,
+		 * the cnMIPS II core may release the PAUSE instantly. */
+		__BITFIELD_FIELD(uint64_t pausetime:3,
+		/* OCTEON II - This field is an extension of
+		 * CvmMemCtl[DIDTTO] */
+		__BITFIELD_FIELD(uint64_t didtto2:1,
+		/* R/W If set, marked write-buffer entries time out
+		 * the same as other entries; if clear, marked
+		 * write-buffer entries use the maximum timeout. */
+		__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
+		/* R/W If set, a merged store does not clear the
+		 * write-buffer entry timeout state. */
+		__BITFIELD_FIELD(uint64_t dismrgclrwbto:1,
+		/* R/W Two bits that are the MSBs of the resultant
+		 * CVMSEG LM word location for an IOBDMA. The other 8
+		 * bits come from the SCRADDR field of the IOBDMA. */
+		__BITFIELD_FIELD(uint64_t iobdmascrmsb:2,
+		/* R/W If set, SYNCWS and SYNCS only order marked
+		 * stores; if clear, SYNCWS and SYNCS only order
+		 * unmarked stores. SYNCWSMARKED has no effect when
+		 * DISSYNCWS is set. */
+		__BITFIELD_FIELD(uint64_t syncwsmarked:1,
+		/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
+		 * SYNC. */
+		__BITFIELD_FIELD(uint64_t dissyncws:1,
+		/* R/W If set, no stall happens on write buffer
+		 * full. */
+		__BITFIELD_FIELD(uint64_t diswbfst:1,
+		/* R/W If set (and SX set), supervisor-level
+		 * loads/stores can use XKPHYS addresses with
+		 * VA<48>==0 */
+		__BITFIELD_FIELD(uint64_t xkmemenas:1,
+		/* R/W If set (and UX set), user-level loads/stores
+		 * can use XKPHYS addresses with VA<48>==0 */
+		__BITFIELD_FIELD(uint64_t xkmemenau:1,
+		/* R/W If set (and SX set), supervisor-level
+		 * loads/stores can use XKPHYS addresses with
+		 * VA<48>==1 */
+		__BITFIELD_FIELD(uint64_t xkioenas:1,
+		/* R/W If set (and UX set), user-level loads/stores
+		 * can use XKPHYS addresses with VA<48>==1 */
+		__BITFIELD_FIELD(uint64_t xkioenau:1,
+		/* R/W If set, all stores act as SYNCW (NOMERGE must
+		 * be set when this is set) RW, reset to 0. */
+		__BITFIELD_FIELD(uint64_t allsyncw:1,
+		/* R/W If set, no stores merge, and all stores reach
+		 * the coherent bus in order. */
+		__BITFIELD_FIELD(uint64_t nomerge:1,
+		/* R/W Selects the bit in the counter used for DID
+		 * time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
+		 * 214. Actual time-out is between 1x and 2x this
+		 * interval. For example, with DIDTTO=3, expiration
+		 * interval is between 16K and 32K. */
+		__BITFIELD_FIELD(uint64_t didtto:2,
+		/* R/W If set, the (mem) CSR clock never turns off. */
+		__BITFIELD_FIELD(uint64_t csrckalwys:1,
+		/* R/W If set, mclk never turns off. */
+		__BITFIELD_FIELD(uint64_t mclkalwys:1,
+		/* R/W Selects the bit in the counter used for write
+		 * buffer flush time-outs (WBFLT+11) is the bit
+		 * position in an internal counter used to determine
+		 * expiration. The write buffer expires between 1x and
+		 * 2x this interval. For example, with WBFLT = 0, a
+		 * write buffer expires between 2K and 4K cycles after
+		 * the write buffer entry is allocated. */
+		__BITFIELD_FIELD(uint64_t wbfltime:3,
+		/* R/W If set, do not put Istream in the L2 cache. */
+		__BITFIELD_FIELD(uint64_t istrnol2:1,
+		/* R/W The write buffer threshold. */
+		__BITFIELD_FIELD(uint64_t wbthresh:4,
+		/* Reserved */
+		__BITFIELD_FIELD(uint64_t reserved2:2,
+		/* R/W If set, CVMSEG is available for loads/stores in
+		 * kernel/debug mode. */
+		__BITFIELD_FIELD(uint64_t cvmsegenak:1,
+		/* R/W If set, CVMSEG is available for loads/stores in
+		 * supervisor mode. */
+		__BITFIELD_FIELD(uint64_t cvmsegenas:1,
+		/* R/W If set, CVMSEG is available for loads/stores in
+		 * user mode. */
+		__BITFIELD_FIELD(uint64_t cvmsegenau:1,
+		/* R/W Size of local memory in cache blocks, 54 (6912
+		 * bytes) is max legal value. */
+		__BITFIELD_FIELD(uint64_t lmemsz:6,
+		;)))))))))))))))))))))))))))))))))
+	} s;
+};
+
+extern void octeon_check_cpu_bist(void);
+
+int octeon_prune_device_tree(void);
+extern const char __dtb_octeon_3xxx_begin;
+extern const char __dtb_octeon_68xx_begin;
+
+/**
+ * Write a 32bit value to the Octeon NPI register space
+ *
+ * @address: Address to write to
+ * @val:     Value to write
+ */
+static inline void octeon_npi_write32(uint64_t address, uint32_t val)
+{
+	cvmx_write64_uint32(address ^ 4, val);
+	cvmx_read64_uint32(address ^ 4);
+}
+
+#ifdef CONFIG_SMP
+void octeon_setup_smp(void);
+#else
+static inline void octeon_setup_smp(void) {}
+#endif
+
+struct irq_domain;
+struct device_node;
+struct irq_data;
+struct irq_chip;
+void octeon_ciu3_mbox_send(int cpu, unsigned int mbox);
+int octeon_irq_ciu3_xlat(struct irq_domain *d,
+			 struct device_node *node,
+			 const u32 *intspec,
+			 unsigned int intsize,
+			 unsigned long *out_hwirq,
+			 unsigned int *out_type);
+void octeon_irq_ciu3_enable(struct irq_data *data);
+void octeon_irq_ciu3_disable(struct irq_data *data);
+void octeon_irq_ciu3_ack(struct irq_data *data);
+void octeon_irq_ciu3_mask(struct irq_data *data);
+void octeon_irq_ciu3_mask_ack(struct irq_data *data);
+int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq,
+			 irq_hw_number_t hw, struct irq_chip *chip);
+
+/* Octeon multiplier save/restore routines from octeon_switch.S */
+void octeon_mult_save(void);
+void octeon_mult_restore(void);
+void octeon_mult_save_end(void);
+void octeon_mult_restore_end(void);
+void octeon_mult_save3(void);
+void octeon_mult_save3_end(void);
+void octeon_mult_save2(void);
+void octeon_mult_save2_end(void);
+void octeon_mult_restore3(void);
+void octeon_mult_restore3_end(void);
+void octeon_mult_restore2(void);
+void octeon_mult_restore2_end(void);
+
+/**
+ * Read a 32bit value from the Octeon NPI register space
+ *
+ * @address: Address to read
+ * Returns The result
+ */
+static inline uint32_t octeon_npi_read32(uint64_t address)
+{
+	return cvmx_read64_uint32(address ^ 4);
+}
+
+extern struct cvmx_bootinfo *octeon_bootinfo;
+
+extern uint64_t octeon_bootloader_entry_addr;
+
+extern void (*octeon_irq_setup_secondary)(void);
+
+typedef void (*octeon_irq_ip4_handler_t)(void);
+void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
+
+extern void octeon_fixup_irqs(void);
+
+extern struct semaphore octeon_bootbus_sem;
+
+struct irq_domain *octeon_irq_get_block_domain(int node, uint8_t block);
+
+#endif /* __ASM_OCTEON_OCTEON_H */