Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 968 insertions, 0 deletions

diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
new file mode 100644
index 000000000..479999b7f
--- /dev/null
+++ b/arch/mips/kernel/signal.c
@@ -0,0 +1,968 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * Copyright (C) 1994 - 2000  Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2014, Imagination Technologies Ltd.
+ */
+#include <linux/cache.h>
+#include <linux/context_tracking.h>
+#include <linux/irqflags.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/personality.h>
+#include <linux/smp.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/ptrace.h>
+#include <linux/unistd.h>
+#include <linux/uprobes.h>
+#include <linux/compiler.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/resume_user_mode.h>
+
+#include <asm/abi.h>
+#include <asm/asm.h>
+#include <linux/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/fpu.h>
+#include <asm/sim.h>
+#include <asm/ucontext.h>
+#include <asm/cpu-features.h>
+#include <asm/dsp.h>
+#include <asm/inst.h>
+#include <asm/msa.h>
+
+#include "signal-common.h"
+
+static int (*save_fp_context)(void __user *sc);
+static int (*restore_fp_context)(void __user *sc);
+
+struct sigframe {
+	u32 sf_ass[4];		/* argument save space for o32 */
+	u32 sf_pad[2];		/* Was: signal trampoline */
+
+	/* Matches struct ucontext from its uc_mcontext field onwards */
+	struct sigcontext sf_sc;
+	sigset_t sf_mask;
+	unsigned long long sf_extcontext[];
+};
+
+struct rt_sigframe {
+	u32 rs_ass[4];		/* argument save space for o32 */
+	u32 rs_pad[2];		/* Was: signal trampoline */
+	struct siginfo rs_info;
+	struct ucontext rs_uc;
+};
+
+#ifdef CONFIG_MIPS_FP_SUPPORT
+
+/*
+ * Thread saved context copy to/from a signal context presumed to be on the
+ * user stack, and therefore accessed with appropriate macros from uaccess.h.
+ */
+static int copy_fp_to_sigcontext(void __user *sc)
+{
+	struct mips_abi *abi = current->thread.abi;
+	uint64_t __user *fpregs = sc + abi->off_sc_fpregs;
+	uint32_t __user *csr = sc + abi->off_sc_fpc_csr;
+	int i;
+	int err = 0;
+	int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1;
+
+	for (i = 0; i < NUM_FPU_REGS; i += inc) {
+		err |=
+		    __put_user(get_fpr64(&current->thread.fpu.fpr[i], 0),
+			       &fpregs[i]);
+	}
+	err |= __put_user(current->thread.fpu.fcr31, csr);
+
+	return err;
+}
+
+static int copy_fp_from_sigcontext(void __user *sc)
+{
+	struct mips_abi *abi = current->thread.abi;
+	uint64_t __user *fpregs = sc + abi->off_sc_fpregs;
+	uint32_t __user *csr = sc + abi->off_sc_fpc_csr;
+	int i;
+	int err = 0;
+	int inc = test_thread_flag(TIF_32BIT_FPREGS) ? 2 : 1;
+	u64 fpr_val;
+
+	for (i = 0; i < NUM_FPU_REGS; i += inc) {
+		err |= __get_user(fpr_val, &fpregs[i]);
+		set_fpr64(&current->thread.fpu.fpr[i], 0, fpr_val);
+	}
+	err |= __get_user(current->thread.fpu.fcr31, csr);
+
+	return err;
+}
+
+#else /* !CONFIG_MIPS_FP_SUPPORT */
+
+static int copy_fp_to_sigcontext(void __user *sc)
+{
+	return 0;
+}
+
+static int copy_fp_from_sigcontext(void __user *sc)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_MIPS_FP_SUPPORT */
+
+/*
+ * Wrappers for the assembly _{save,restore}_fp_context functions.
+ */
+static int save_hw_fp_context(void __user *sc)
+{
+	struct mips_abi *abi = current->thread.abi;
+	uint64_t __user *fpregs = sc + abi->off_sc_fpregs;
+	uint32_t __user *csr = sc + abi->off_sc_fpc_csr;
+
+	return _save_fp_context(fpregs, csr);
+}
+
+static int restore_hw_fp_context(void __user *sc)
+{
+	struct mips_abi *abi = current->thread.abi;
+	uint64_t __user *fpregs = sc + abi->off_sc_fpregs;
+	uint32_t __user *csr = sc + abi->off_sc_fpc_csr;
+
+	return _restore_fp_context(fpregs, csr);
+}
+
+/*
+ * Extended context handling.
+ */
+
+static inline void __user *sc_to_extcontext(void __user *sc)
+{
+	struct ucontext __user *uc;
+
+	/*
+	 * We can just pretend the sigcontext is always embedded in a struct
+	 * ucontext here, because the offset from sigcontext to extended
+	 * context is the same in the struct sigframe case.
+	 */
+	uc = container_of(sc, struct ucontext, uc_mcontext);
+	return &uc->uc_extcontext;
+}
+
+#ifdef CONFIG_CPU_HAS_MSA
+
+static int save_msa_extcontext(void __user *buf)
+{
+	struct msa_extcontext __user *msa = buf;
+	uint64_t val;
+	int i, err;
+
+	if (!thread_msa_context_live())
+		return 0;
+
+	/*
+	 * Ensure that we can't lose the live MSA context between checking
+	 * for it & writing it to memory.
+	 */
+	preempt_disable();
+
+	if (is_msa_enabled()) {
+		/*
+		 * There are no EVA versions of the vector register load/store
+		 * instructions, so MSA context has to be saved to kernel memory
+		 * and then copied to user memory. The save to kernel memory
+		 * should already have been done when handling scalar FP
+		 * context.
+		 */
+		BUG_ON(IS_ENABLED(CONFIG_EVA));
+
+		err = __put_user(read_msa_csr(), &msa->csr);
+		err |= _save_msa_all_upper(&msa->wr);
+
+		preempt_enable();
+	} else {
+		preempt_enable();
+
+		err = __put_user(current->thread.fpu.msacsr, &msa->csr);
+
+		for (i = 0; i < NUM_FPU_REGS; i++) {
+			val = get_fpr64(&current->thread.fpu.fpr[i], 1);
+			err |= __put_user(val, &msa->wr[i]);
+		}
+	}
+
+	err |= __put_user(MSA_EXTCONTEXT_MAGIC, &msa->ext.magic);
+	err |= __put_user(sizeof(*msa), &msa->ext.size);
+
+	return err ? -EFAULT : sizeof(*msa);
+}
+
+static int restore_msa_extcontext(void __user *buf, unsigned int size)
+{
+	struct msa_extcontext __user *msa = buf;
+	unsigned long long val;
+	unsigned int csr;
+	int i, err;
+
+	if (size != sizeof(*msa))
+		return -EINVAL;
+
+	err = get_user(csr, &msa->csr);
+	if (err)
+		return err;
+
+	preempt_disable();
+
+	if (is_msa_enabled()) {
+		/*
+		 * There are no EVA versions of the vector register load/store
+		 * instructions, so MSA context has to be copied to kernel
+		 * memory and later loaded to registers. The same is true of
+		 * scalar FP context, so FPU & MSA should have already been
+		 * disabled whilst handling scalar FP context.
+		 */
+		BUG_ON(IS_ENABLED(CONFIG_EVA));
+
+		write_msa_csr(csr);
+		err |= _restore_msa_all_upper(&msa->wr);
+		preempt_enable();
+	} else {
+		preempt_enable();
+
+		current->thread.fpu.msacsr = csr;
+
+		for (i = 0; i < NUM_FPU_REGS; i++) {
+			err |= __get_user(val, &msa->wr[i]);
+			set_fpr64(&current->thread.fpu.fpr[i], 1, val);
+		}
+	}
+
+	return err;
+}
+
+#else /* !CONFIG_CPU_HAS_MSA */
+
+static int save_msa_extcontext(void __user *buf)
+{
+	return 0;
+}
+
+static int restore_msa_extcontext(void __user *buf, unsigned int size)
+{
+	return SIGSYS;
+}
+
+#endif /* !CONFIG_CPU_HAS_MSA */
+
+static int save_extcontext(void __user *buf)
+{
+	int sz;
+
+	sz = save_msa_extcontext(buf);
+	if (sz < 0)
+		return sz;
+	buf += sz;
+
+	/* If no context was saved then trivially return */
+	if (!sz)
+		return 0;
+
+	/* Write the end marker */
+	if (__put_user(END_EXTCONTEXT_MAGIC, (u32 *)buf))
+		return -EFAULT;
+
+	sz += sizeof(((struct extcontext *)NULL)->magic);
+	return sz;
+}
+
+static int restore_extcontext(void __user *buf)
+{
+	struct extcontext ext;
+	int err;
+
+	while (1) {
+		err = __get_user(ext.magic, (unsigned int *)buf);
+		if (err)
+			return err;
+
+		if (ext.magic == END_EXTCONTEXT_MAGIC)
+			return 0;
+
+		err = __get_user(ext.size, (unsigned int *)(buf
+			+ offsetof(struct extcontext, size)));
+		if (err)
+			return err;
+
+		switch (ext.magic) {
+		case MSA_EXTCONTEXT_MAGIC:
+			err = restore_msa_extcontext(buf, ext.size);
+			break;
+
+		default:
+			err = -EINVAL;
+			break;
+		}
+
+		if (err)
+			return err;
+
+		buf += ext.size;
+	}
+}
+
+/*
+ * Helper routines
+ */
+int protected_save_fp_context(void __user *sc)
+{
+	struct mips_abi *abi = current->thread.abi;
+	uint64_t __user *fpregs = sc + abi->off_sc_fpregs;
+	uint32_t __user *csr = sc + abi->off_sc_fpc_csr;
+	uint32_t __user *used_math = sc + abi->off_sc_used_math;
+	unsigned int used, ext_sz;
+	int err;
+
+	used = used_math() ? USED_FP : 0;
+	if (!used)
+		goto fp_done;
+
+	if (!test_thread_flag(TIF_32BIT_FPREGS))
+		used |= USED_FR1;
+	if (test_thread_flag(TIF_HYBRID_FPREGS))
+		used |= USED_HYBRID_FPRS;
+
+	/*
+	 * EVA does not have userland equivalents of ldc1 or sdc1, so
+	 * save to the kernel FP context & copy that to userland below.
+	 */
+	if (IS_ENABLED(CONFIG_EVA))
+		lose_fpu(1);
+
+	while (1) {
+		lock_fpu_owner();
+		if (is_fpu_owner()) {
+			err = save_fp_context(sc);
+			unlock_fpu_owner();
+		} else {
+			unlock_fpu_owner();
+			err = copy_fp_to_sigcontext(sc);
+		}
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __put_user(0, &fpregs[0]) |
+			__put_user(0, &fpregs[31]) |
+			__put_user(0, csr);
+		if (err)
+			return err;	/* really bad sigcontext */
+	}
+
+fp_done:
+	ext_sz = err = save_extcontext(sc_to_extcontext(sc));
+	if (err < 0)
+		return err;
+	used |= ext_sz ? USED_EXTCONTEXT : 0;
+
+	return __put_user(used, used_math);
+}
+
+int protected_restore_fp_context(void __user *sc)
+{
+	struct mips_abi *abi = current->thread.abi;
+	uint64_t __user *fpregs = sc + abi->off_sc_fpregs;
+	uint32_t __user *csr = sc + abi->off_sc_fpc_csr;
+	uint32_t __user *used_math = sc + abi->off_sc_used_math;
+	unsigned int used;
+	int err, sig = 0, tmp __maybe_unused;
+
+	err = __get_user(used, used_math);
+	conditional_used_math(used & USED_FP);
+
+	/*
+	 * The signal handler may have used FPU; give it up if the program
+	 * doesn't want it following sigreturn.
+	 */
+	if (err || !(used & USED_FP))
+		lose_fpu(0);
+	if (err)
+		return err;
+	if (!(used & USED_FP))
+		goto fp_done;
+
+	err = sig = fpcsr_pending(csr);
+	if (err < 0)
+		return err;
+
+	/*
+	 * EVA does not have userland equivalents of ldc1 or sdc1, so we
+	 * disable the FPU here such that the code below simply copies to
+	 * the kernel FP context.
+	 */
+	if (IS_ENABLED(CONFIG_EVA))
+		lose_fpu(0);
+
+	while (1) {
+		lock_fpu_owner();
+		if (is_fpu_owner()) {
+			err = restore_fp_context(sc);
+			unlock_fpu_owner();
+		} else {
+			unlock_fpu_owner();
+			err = copy_fp_from_sigcontext(sc);
+		}
+		if (likely(!err))
+			break;
+		/* touch the sigcontext and try again */
+		err = __get_user(tmp, &fpregs[0]) |
+			__get_user(tmp, &fpregs[31]) |
+			__get_user(tmp, csr);
+		if (err)
+			break;	/* really bad sigcontext */
+	}
+
+fp_done:
+	if (!err && (used & USED_EXTCONTEXT))
+		err = restore_extcontext(sc_to_extcontext(sc));
+
+	return err ?: sig;
+}
+
+int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	int err = 0;
+	int i;
+
+	err |= __put_user(regs->cp0_epc, &sc->sc_pc);
+
+	err |= __put_user(0, &sc->sc_regs[0]);
+	for (i = 1; i < 32; i++)
+		err |= __put_user(regs->regs[i], &sc->sc_regs[i]);
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	err |= __put_user(regs->acx, &sc->sc_acx);
+#endif
+	err |= __put_user(regs->hi, &sc->sc_mdhi);
+	err |= __put_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __put_user(mfhi1(), &sc->sc_hi1);
+		err |= __put_user(mflo1(), &sc->sc_lo1);
+		err |= __put_user(mfhi2(), &sc->sc_hi2);
+		err |= __put_user(mflo2(), &sc->sc_lo2);
+		err |= __put_user(mfhi3(), &sc->sc_hi3);
+		err |= __put_user(mflo3(), &sc->sc_lo3);
+		err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
+	}
+
+
+	/*
+	 * Save FPU state to signal context. Signal handler
+	 * will "inherit" current FPU state.
+	 */
+	err |= protected_save_fp_context(sc);
+
+	return err;
+}
+
+static size_t extcontext_max_size(void)
+{
+	size_t sz = 0;
+
+	/*
+	 * The assumption here is that between this point & the point at which
+	 * the extended context is saved the size of the context should only
+	 * ever be able to shrink (if the task is preempted), but never grow.
+	 * That is, what this function returns is an upper bound on the size of
+	 * the extended context for the current task at the current time.
+	 */
+
+	if (thread_msa_context_live())
+		sz += sizeof(struct msa_extcontext);
+
+	/* If any context is saved then we'll append the end marker */
+	if (sz)
+		sz += sizeof(((struct extcontext *)NULL)->magic);
+
+	return sz;
+}
+
+int fpcsr_pending(unsigned int __user *fpcsr)
+{
+	int err, sig = 0;
+	unsigned int csr, enabled;
+
+	err = __get_user(csr, fpcsr);
+	enabled = FPU_CSR_UNI_X | ((csr & FPU_CSR_ALL_E) << 5);
+	/*
+	 * If the signal handler set some FPU exceptions, clear it and
+	 * send SIGFPE.
+	 */
+	if (csr & enabled) {
+		csr &= ~enabled;
+		err |= __put_user(csr, fpcsr);
+		sig = SIGFPE;
+	}
+	return err ?: sig;
+}
+
+int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
+{
+	unsigned long treg;
+	int err = 0;
+	int i;
+
+	/* Always make any pending restarted system calls return -EINTR */
+	current->restart_block.fn = do_no_restart_syscall;
+
+	err |= __get_user(regs->cp0_epc, &sc->sc_pc);
+
+#ifdef CONFIG_CPU_HAS_SMARTMIPS
+	err |= __get_user(regs->acx, &sc->sc_acx);
+#endif
+	err |= __get_user(regs->hi, &sc->sc_mdhi);
+	err |= __get_user(regs->lo, &sc->sc_mdlo);
+	if (cpu_has_dsp) {
+		err |= __get_user(treg, &sc->sc_hi1); mthi1(treg);
+		err |= __get_user(treg, &sc->sc_lo1); mtlo1(treg);
+		err |= __get_user(treg, &sc->sc_hi2); mthi2(treg);
+		err |= __get_user(treg, &sc->sc_lo2); mtlo2(treg);
+		err |= __get_user(treg, &sc->sc_hi3); mthi3(treg);
+		err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
+		err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
+	}
+
+	for (i = 1; i < 32; i++)
+		err |= __get_user(regs->regs[i], &sc->sc_regs[i]);
+
+	return err ?: protected_restore_fp_context(sc);
+}
+
+#ifdef CONFIG_WAR_ICACHE_REFILLS
+#define SIGMASK		~(cpu_icache_line_size()-1)
+#else
+#define SIGMASK		ALMASK
+#endif
+
+void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
+			  size_t frame_size)
+{
+	unsigned long sp;
+
+	/* Leave space for potential extended context */
+	frame_size += extcontext_max_size();
+
+	/* Default to using normal stack */
+	sp = regs->regs[29];
+
+	/*
+	 * If we are on the alternate signal stack and would overflow it, don't.
+	 * Return an always-bogus address instead so we will die with SIGSEGV.
+	 */
+	if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
+		return (void __user __force *)(-1UL);
+
+	/*
+	 * FPU emulator may have it's own trampoline active just
+	 * above the user stack, 16-bytes before the next lowest
+	 * 16 byte boundary.  Try to avoid trashing it.
+	 */
+	sp -= 32;
+
+	sp = sigsp(sp, ksig);
+
+	return (void __user *)((sp - frame_size) & SIGMASK);
+}
+
+/*
+ * Atomically swap in the new signal mask, and wait for a signal.
+ */
+
+#ifdef CONFIG_TRAD_SIGNALS
+SYSCALL_DEFINE1(sigsuspend, sigset_t __user *, uset)
+{
+	return sys_rt_sigsuspend(uset, sizeof(sigset_t));
+}
+#endif
+
+#ifdef CONFIG_TRAD_SIGNALS
+SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act,
+	struct sigaction __user *, oact)
+{
+	struct k_sigaction new_ka, old_ka;
+	int ret;
+	int err = 0;
+
+	if (act) {
+		old_sigset_t mask;
+
+		if (!access_ok(act, sizeof(*act)))
+			return -EFAULT;
+		err |= __get_user(new_ka.sa.sa_handler, &act->sa_handler);
+		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
+		err |= __get_user(mask, &act->sa_mask.sig[0]);
+		if (err)
+			return -EFAULT;
+
+		siginitset(&new_ka.sa.sa_mask, mask);
+	}
+
+	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
+
+	if (!ret && oact) {
+		if (!access_ok(oact, sizeof(*oact)))
+			return -EFAULT;
+		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
+		err |= __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
+		err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
+		err |= __put_user(0, &oact->sa_mask.sig[1]);
+		err |= __put_user(0, &oact->sa_mask.sig[2]);
+		err |= __put_user(0, &oact->sa_mask.sig[3]);
+		if (err)
+			return -EFAULT;
+	}
+
+	return ret;
+}
+#endif
+
+#ifdef CONFIG_TRAD_SIGNALS
+asmlinkage void sys_sigreturn(void)
+{
+	struct sigframe __user *frame;
+	struct pt_regs *regs;
+	sigset_t blocked;
+	int sig;
+
+	regs = current_pt_regs();
+	frame = (struct sigframe __user *)regs->regs[29];
+	if (!access_ok(frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&blocked, &frame->sf_mask, sizeof(blocked)))
+		goto badframe;
+
+	set_current_blocked(&blocked);
+
+	sig = restore_sigcontext(regs, &frame->sf_sc);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig);
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		: /* no outputs */
+		: "r" (regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV);
+}
+#endif /* CONFIG_TRAD_SIGNALS */
+
+asmlinkage void sys_rt_sigreturn(void)
+{
+	struct rt_sigframe __user *frame;
+	struct pt_regs *regs;
+	sigset_t set;
+	int sig;
+
+	regs = current_pt_regs();
+	frame = (struct rt_sigframe __user *)regs->regs[29];
+	if (!access_ok(frame, sizeof(*frame)))
+		goto badframe;
+	if (__copy_from_user(&set, &frame->rs_uc.uc_sigmask, sizeof(set)))
+		goto badframe;
+
+	set_current_blocked(&set);
+
+	sig = restore_sigcontext(regs, &frame->rs_uc.uc_mcontext);
+	if (sig < 0)
+		goto badframe;
+	else if (sig)
+		force_sig(sig);
+
+	if (restore_altstack(&frame->rs_uc.uc_stack))
+		goto badframe;
+
+	/*
+	 * Don't let your children do this ...
+	 */
+	__asm__ __volatile__(
+		"move\t$29, %0\n\t"
+		"j\tsyscall_exit"
+		: /* no outputs */
+		: "r" (regs));
+	/* Unreached */
+
+badframe:
+	force_sig(SIGSEGV);
+}
+
+#ifdef CONFIG_TRAD_SIGNALS
+static int setup_frame(void *sig_return, struct ksignal *ksig,
+		       struct pt_regs *regs, sigset_t *set)
+{
+	struct sigframe __user *frame;
+	int err = 0;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(frame, sizeof (*frame)))
+		return -EFAULT;
+
+	err |= setup_sigcontext(regs, &frame->sf_sc);
+	err |= __copy_to_user(&frame->sf_mask, set, sizeof(*set));
+	if (err)
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to struct sigcontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to the
+	 * struct sigframe.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = 0;
+	regs->regs[ 6] = (unsigned long) &frame->sf_sc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+	return 0;
+}
+#endif
+
+static int setup_rt_frame(void *sig_return, struct ksignal *ksig,
+			  struct pt_regs *regs, sigset_t *set)
+{
+	struct rt_sigframe __user *frame;
+
+	frame = get_sigframe(ksig, regs, sizeof(*frame));
+	if (!access_ok(frame, sizeof (*frame)))
+		return -EFAULT;
+
+	/* Create siginfo.  */
+	if (copy_siginfo_to_user(&frame->rs_info, &ksig->info))
+		return -EFAULT;
+
+	/* Create the ucontext.	 */
+	if (__put_user(0, &frame->rs_uc.uc_flags))
+		return -EFAULT;
+	if (__put_user(NULL, &frame->rs_uc.uc_link))
+		return -EFAULT;
+	if (__save_altstack(&frame->rs_uc.uc_stack, regs->regs[29]))
+		return -EFAULT;
+	if (setup_sigcontext(regs, &frame->rs_uc.uc_mcontext))
+		return -EFAULT;
+	if (__copy_to_user(&frame->rs_uc.uc_sigmask, set, sizeof(*set)))
+		return -EFAULT;
+
+	/*
+	 * Arguments to signal handler:
+	 *
+	 *   a0 = signal number
+	 *   a1 = 0 (should be cause)
+	 *   a2 = pointer to ucontext
+	 *
+	 * $25 and c0_epc point to the signal handler, $29 points to
+	 * the struct rt_sigframe.
+	 */
+	regs->regs[ 4] = ksig->sig;
+	regs->regs[ 5] = (unsigned long) &frame->rs_info;
+	regs->regs[ 6] = (unsigned long) &frame->rs_uc;
+	regs->regs[29] = (unsigned long) frame;
+	regs->regs[31] = (unsigned long) sig_return;
+	regs->cp0_epc = regs->regs[25] = (unsigned long) ksig->ka.sa.sa_handler;
+
+	DEBUGP("SIG deliver (%s:%d): sp=0x%p pc=0x%lx ra=0x%lx\n",
+	       current->comm, current->pid,
+	       frame, regs->cp0_epc, regs->regs[31]);
+
+	return 0;
+}
+
+struct mips_abi mips_abi = {
+#ifdef CONFIG_TRAD_SIGNALS
+	.setup_frame	= setup_frame,
+#endif
+	.setup_rt_frame = setup_rt_frame,
+	.restart	= __NR_restart_syscall,
+
+	.off_sc_fpregs = offsetof(struct sigcontext, sc_fpregs),
+	.off_sc_fpc_csr = offsetof(struct sigcontext, sc_fpc_csr),
+	.off_sc_used_math = offsetof(struct sigcontext, sc_used_math),
+
+	.vdso		= &vdso_image,
+};
+
+static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+	sigset_t *oldset = sigmask_to_save();
+	int ret;
+	struct mips_abi *abi = current->thread.abi;
+	void *vdso = current->mm->context.vdso;
+
+	/*
+	 * If we were emulating a delay slot instruction, exit that frame such
+	 * that addresses in the sigframe are as expected for userland and we
+	 * don't have a problem if we reuse the thread's frame for an
+	 * instruction within the signal handler.
+	 */
+	dsemul_thread_rollback(regs);
+
+	if (regs->regs[0]) {
+		switch(regs->regs[2]) {
+		case ERESTART_RESTARTBLOCK:
+		case ERESTARTNOHAND:
+			regs->regs[2] = EINTR;
+			break;
+		case ERESTARTSYS:
+			if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
+				regs->regs[2] = EINTR;
+				break;
+			}
+			fallthrough;
+		case ERESTARTNOINTR:
+			regs->regs[7] = regs->regs[26];
+			regs->regs[2] = regs->regs[0];
+			regs->cp0_epc -= 4;
+		}
+
+		regs->regs[0] = 0;		/* Don't deal with this again.	*/
+	}
+
+	rseq_signal_deliver(ksig, regs);
+
+	if (sig_uses_siginfo(&ksig->ka, abi))
+		ret = abi->setup_rt_frame(vdso + abi->vdso->off_rt_sigreturn,
+					  ksig, regs, oldset);
+	else
+		ret = abi->setup_frame(vdso + abi->vdso->off_sigreturn,
+				       ksig, regs, oldset);
+
+	signal_setup_done(ret, ksig, 0);
+}
+
+static void do_signal(struct pt_regs *regs)
+{
+	struct ksignal ksig;
+
+	if (get_signal(&ksig)) {
+		/* Whee!  Actually deliver the signal.	*/
+		handle_signal(&ksig, regs);
+		return;
+	}
+
+	if (regs->regs[0]) {
+		switch (regs->regs[2]) {
+		case ERESTARTNOHAND:
+		case ERESTARTSYS:
+		case ERESTARTNOINTR:
+			regs->regs[2] = regs->regs[0];
+			regs->regs[7] = regs->regs[26];
+			regs->cp0_epc -= 4;
+			break;
+
+		case ERESTART_RESTARTBLOCK:
+			regs->regs[2] = current->thread.abi->restart;
+			regs->regs[7] = regs->regs[26];
+			regs->cp0_epc -= 4;
+			break;
+		}
+		regs->regs[0] = 0;	/* Don't deal with this again.	*/
+	}
+
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back
+	 */
+	restore_saved_sigmask();
+}
+
+/*
+ * notification of userspace execution resumption
+ * - triggered by the TIF_WORK_MASK flags
+ */
+asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
+	__u32 thread_info_flags)
+{
+	local_irq_enable();
+
+	user_exit();
+
+	if (thread_info_flags & _TIF_UPROBE)
+		uprobe_notify_resume(regs);
+
+	/* deal with pending signal delivery */
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
+		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME)
+		resume_user_mode_work(regs);
+
+	user_enter();
+}
+
+#if defined(CONFIG_SMP) && defined(CONFIG_MIPS_FP_SUPPORT)
+static int smp_save_fp_context(void __user *sc)
+{
+	return raw_cpu_has_fpu
+	       ? save_hw_fp_context(sc)
+	       : copy_fp_to_sigcontext(sc);
+}
+
+static int smp_restore_fp_context(void __user *sc)
+{
+	return raw_cpu_has_fpu
+	       ? restore_hw_fp_context(sc)
+	       : copy_fp_from_sigcontext(sc);
+}
+#endif
+
+static int signal_setup(void)
+{
+	/*
+	 * The offset from sigcontext to extended context should be the same
+	 * regardless of the type of signal, such that userland can always know
+	 * where to look if it wishes to find the extended context structures.
+	 */
+	BUILD_BUG_ON((offsetof(struct sigframe, sf_extcontext) -
+		      offsetof(struct sigframe, sf_sc)) !=
+		     (offsetof(struct rt_sigframe, rs_uc.uc_extcontext) -
+		      offsetof(struct rt_sigframe, rs_uc.uc_mcontext)));
+
+#if defined(CONFIG_SMP) && defined(CONFIG_MIPS_FP_SUPPORT)
+	/* For now just do the cpu_has_fpu check when the functions are invoked */
+	save_fp_context = smp_save_fp_context;
+	restore_fp_context = smp_restore_fp_context;
+#else
+	if (cpu_has_fpu) {
+		save_fp_context = save_hw_fp_context;
+		restore_fp_context = restore_hw_fp_context;
+	} else {
+		save_fp_context = copy_fp_to_sigcontext;
+		restore_fp_context = copy_fp_from_sigcontext;
+	}
+#endif /* CONFIG_SMP */
+
+	return 0;
+}
+
+arch_initcall(signal_setup);