Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 240 insertions, 0 deletions

diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
new file mode 100644
index 000000000..52cbde60e
--- /dev/null
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#define PAGE_SIZE _PAGE_SIZE
+
+/*
+ * Put .bss..swapper_pg_dir as the first thing in .bss. This will
+ * ensure that it has .bss alignment (64K).
+ */
+#define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
+
+/* Cavium Octeon should not have a separate PT_NOTE Program Header. */
+#ifndef CONFIG_CAVIUM_OCTEON_SOC
+#define EMITS_PT_NOTE
+#endif
+
+#include <asm-generic/vmlinux.lds.h>
+
+#undef mips
+#define mips mips
+OUTPUT_ARCH(mips)
+ENTRY(kernel_entry)
+PHDRS {
+	text PT_LOAD FLAGS(7);	/* RWX */
+#ifndef CONFIG_CAVIUM_OCTEON_SOC
+	note PT_NOTE FLAGS(4);	/* R__ */
+#endif /* CAVIUM_OCTEON_SOC */
+}
+
+#ifdef CONFIG_32BIT
+	#ifdef CONFIG_CPU_LITTLE_ENDIAN
+		jiffies	 = jiffies_64;
+	#else
+		jiffies	 = jiffies_64 + 4;
+	#endif
+#else
+	jiffies	 = jiffies_64;
+#endif
+
+SECTIONS
+{
+#ifdef CONFIG_BOOT_ELF64
+	/* Read-only sections, merged into text segment: */
+	/* . = 0xc000000000000000; */
+
+	/* This is the value for an Origin kernel, taken from an IRIX kernel.  */
+	/* . = 0xc00000000001c000; */
+
+	/* Set the vaddr for the text segment to a value
+	 *   >= 0xa800 0000 0001 9000 if no symmon is going to configured
+	 *   >= 0xa800 0000 0030 0000 otherwise
+	 */
+
+	/* . = 0xa800000000300000; */
+	. = 0xffffffff80300000;
+#endif
+	. = LINKER_LOAD_ADDRESS;
+	/* read-only */
+	_text = .;	/* Text and read-only data */
+	.text : {
+		TEXT_TEXT
+		SCHED_TEXT
+		LOCK_TEXT
+		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
+		*(.fixup)
+		*(.gnu.warning)
+		. = ALIGN(16);
+		*(.got)	/* Global offset table */
+	} :text = 0
+	_etext = .;	/* End of text section */
+
+	EXCEPTION_TABLE(16)
+
+	/* Exception table for data bus errors */
+	__dbe_table : {
+		__start___dbe_table = .;
+		KEEP(*(__dbe_table))
+		__stop___dbe_table = .;
+	}
+
+	_sdata = .;			/* Start of data section */
+	RO_DATA(4096)
+
+	/* writeable */
+	.data : {	/* Data */
+		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
+
+		INIT_TASK_DATA(THREAD_SIZE)
+		NOSAVE_DATA
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
+		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+		DATA_DATA
+		CONSTRUCTORS
+	}
+	BUG_TABLE
+	_gp = . + 0x8000;
+	.lit8 : {
+		*(.lit8)
+	}
+	.lit4 : {
+		*(.lit4)
+	}
+	/* We want the small data sections together, so single-instruction offsets
+	   can access them all, and initialized data all before uninitialized, so
+	   we can shorten the on-disk segment size.  */
+	.sdata : {
+		*(.sdata)
+	}
+	_edata =  .;			/* End of data section */
+
+	/* will be freed after init */
+	. = ALIGN(PAGE_SIZE);		/* Init code and data */
+	__init_begin = .;
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
+
+	. = ALIGN(4);
+	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
+		__mips_machines_start = .;
+		KEEP(*(.mips.machines.init))
+		__mips_machines_end = .;
+	}
+
+	/* .exit.text is discarded at runtime, not link time, to deal with
+	 * references from .rodata
+	 */
+	.exit.text : {
+		EXIT_TEXT
+	}
+	.exit.data : {
+		EXIT_DATA
+	}
+#ifdef CONFIG_SMP
+	PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
+#endif
+
+	.rel.dyn : ALIGN(8) {
+		*(.rel)
+		*(.rel*)
+	}
+
+#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
+	STRUCT_ALIGN();
+	.appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
+		*(.appended_dtb)
+		KEEP(*(.appended_dtb))
+	}
+#endif
+
+#ifdef CONFIG_RELOCATABLE
+	. = ALIGN(4);
+
+	.data.reloc : {
+		_relocation_start = .;
+		/*
+		 * Space for relocation table
+		 * This needs to be filled so that the
+		 * relocs tool can overwrite the content.
+		 * An invalid value is left at the start of the
+		 * section to abort relocation if the table
+		 * has not been filled in.
+		 */
+		LONG(0xFFFFFFFF);
+		FILL(0);
+		. += CONFIG_RELOCATION_TABLE_SIZE - 4;
+		_relocation_end = .;
+	}
+#endif
+
+#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
+	.fill : {
+		FILL(0);
+		BYTE(0);
+		STRUCT_ALIGN();
+	}
+	__appended_dtb = .;
+	/* leave space for appended DTB */
+	. += 0x100000;
+#endif
+	/*
+	 * Align to 64K in attempt to eliminate holes before the
+	 * .bss..swapper_pg_dir section at the start of .bss.  This
+	 * also satisfies PAGE_SIZE alignment as the largest page size
+	 * allowed is 64K.
+	 */
+	. = ALIGN(0x10000);
+	__init_end = .;
+	/* freed after init ends here */
+
+	/*
+	 * Force .bss to 64K alignment so that .bss..swapper_pg_dir
+	 * gets that alignment.	 .sbss should be empty, so there will be
+	 * no holes after __init_end. */
+	BSS_SECTION(0, 0x10000, 8)
+
+	_end = . ;
+
+	/* These mark the ABI of the kernel for debuggers.  */
+	.mdebug.abi32 : {
+		KEEP(*(.mdebug.abi32))
+	}
+	.mdebug.abi64 : {
+		KEEP(*(.mdebug.abi64))
+	}
+
+	/* This is the MIPS specific mdebug section.  */
+	.mdebug : {
+		*(.mdebug)
+	}
+
+	STABS_DEBUG
+	DWARF_DEBUG
+	ELF_DETAILS
+
+	/* These must appear regardless of  .  */
+	.gptab.sdata : {
+		*(.gptab.data)
+		*(.gptab.sdata)
+	}
+	.gptab.sbss : {
+		*(.gptab.bss)
+		*(.gptab.sbss)
+	}
+
+	/* Sections to be discarded */
+	DISCARDS
+	/DISCARD/ : {
+		/* ABI crap starts here */
+		*(.MIPS.abiflags)
+		*(.MIPS.options)
+		*(.gnu.attributes)
+		*(.options)
+		*(.pdr)
+		*(.reginfo)
+	}
+}