diff options
author | 2023-02-21 18:24:12 -0800 | |
---|---|---|
committer | 2023-02-21 18:24:12 -0800 | |
commit | 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 (patch) | |
tree | cc5c2d0a898769fd59549594fedb3ee6f84e59a0 /arch/mips/mm/cerr-sb1.c | |
download | linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.tar.gz linux-5b7c4cabbb65f5c469464da6c5f614cbd7f730f2.zip |
Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
Diffstat (limited to 'arch/mips/mm/cerr-sb1.c')
-rw-r--r-- | arch/mips/mm/cerr-sb1.c | 569 |
1 files changed, 569 insertions, 0 deletions
diff --git a/arch/mips/mm/cerr-sb1.c b/arch/mips/mm/cerr-sb1.c new file mode 100644 index 000000000..a3c02df19 --- /dev/null +++ b/arch/mips/mm/cerr-sb1.c @@ -0,0 +1,569 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2001,2002,2003 Broadcom Corporation + */ +#include <linux/sched.h> +#include <asm/mipsregs.h> +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> + +#if !defined(CONFIG_SIBYTE_BUS_WATCHER) || defined(CONFIG_SIBYTE_BW_TRACE) +#include <asm/io.h> +#include <asm/sibyte/sb1250_scd.h> +#endif + +/* + * We'd like to dump the L2_ECC_TAG register on errors, but errata make + * that unsafe... So for now we don't. (BCM1250/BCM112x erratum SOC-48.) + */ +#undef DUMP_L2_ECC_TAG_ON_ERROR + +/* SB1 definitions */ + +/* XXX should come from config1 XXX */ +#define SB1_CACHE_INDEX_MASK 0x1fe0 + +#define CP0_ERRCTL_RECOVERABLE (1 << 31) +#define CP0_ERRCTL_DCACHE (1 << 30) +#define CP0_ERRCTL_ICACHE (1 << 29) +#define CP0_ERRCTL_MULTIBUS (1 << 23) +#define CP0_ERRCTL_MC_TLB (1 << 15) +#define CP0_ERRCTL_MC_TIMEOUT (1 << 14) + +#define CP0_CERRI_TAG_PARITY (1 << 29) +#define CP0_CERRI_DATA_PARITY (1 << 28) +#define CP0_CERRI_EXTERNAL (1 << 26) + +#define CP0_CERRI_IDX_VALID(c) (!((c) & CP0_CERRI_EXTERNAL)) +#define CP0_CERRI_DATA (CP0_CERRI_DATA_PARITY) + +#define CP0_CERRD_MULTIPLE (1 << 31) +#define CP0_CERRD_TAG_STATE (1 << 30) +#define CP0_CERRD_TAG_ADDRESS (1 << 29) +#define CP0_CERRD_DATA_SBE (1 << 28) +#define CP0_CERRD_DATA_DBE (1 << 27) +#define CP0_CERRD_EXTERNAL (1 << 26) +#define CP0_CERRD_LOAD (1 << 25) +#define CP0_CERRD_STORE (1 << 24) +#define CP0_CERRD_FILLWB (1 << 23) +#define CP0_CERRD_COHERENCY (1 << 22) +#define CP0_CERRD_DUPTAG (1 << 21) + +#define CP0_CERRD_DPA_VALID(c) (!((c) & CP0_CERRD_EXTERNAL)) +#define CP0_CERRD_IDX_VALID(c) \ + (((c) & (CP0_CERRD_LOAD | CP0_CERRD_STORE)) ? (!((c) & CP0_CERRD_EXTERNAL)) : 0) +#define CP0_CERRD_CAUSES \ + (CP0_CERRD_LOAD | CP0_CERRD_STORE | CP0_CERRD_FILLWB | CP0_CERRD_COHERENCY | CP0_CERRD_DUPTAG) +#define CP0_CERRD_TYPES \ + (CP0_CERRD_TAG_STATE | CP0_CERRD_TAG_ADDRESS | CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE | CP0_CERRD_EXTERNAL) +#define CP0_CERRD_DATA (CP0_CERRD_DATA_SBE | CP0_CERRD_DATA_DBE) + +static uint32_t extract_ic(unsigned short addr, int data); +static uint32_t extract_dc(unsigned short addr, int data); + +static inline void breakout_errctl(unsigned int val) +{ + if (val & CP0_ERRCTL_RECOVERABLE) + printk(" recoverable"); + if (val & CP0_ERRCTL_DCACHE) + printk(" dcache"); + if (val & CP0_ERRCTL_ICACHE) + printk(" icache"); + if (val & CP0_ERRCTL_MULTIBUS) + printk(" multiple-buserr"); + printk("\n"); +} + +static inline void breakout_cerri(unsigned int val) +{ + if (val & CP0_CERRI_TAG_PARITY) + printk(" tag-parity"); + if (val & CP0_CERRI_DATA_PARITY) + printk(" data-parity"); + if (val & CP0_CERRI_EXTERNAL) + printk(" external"); + printk("\n"); +} + +static inline void breakout_cerrd(unsigned int val) +{ + switch (val & CP0_CERRD_CAUSES) { + case CP0_CERRD_LOAD: + printk(" load,"); + break; + case CP0_CERRD_STORE: + printk(" store,"); + break; + case CP0_CERRD_FILLWB: + printk(" fill/wb,"); + break; + case CP0_CERRD_COHERENCY: + printk(" coherency,"); + break; + case CP0_CERRD_DUPTAG: + printk(" duptags,"); + break; + default: + printk(" NO CAUSE,"); + break; + } + if (!(val & CP0_CERRD_TYPES)) + printk(" NO TYPE"); + else { + if (val & CP0_CERRD_MULTIPLE) + printk(" multi-err"); + if (val & CP0_CERRD_TAG_STATE) + printk(" tag-state"); + if (val & CP0_CERRD_TAG_ADDRESS) + printk(" tag-address"); + if (val & CP0_CERRD_DATA_SBE) + printk(" data-SBE"); + if (val & CP0_CERRD_DATA_DBE) + printk(" data-DBE"); + if (val & CP0_CERRD_EXTERNAL) + printk(" external"); + } + printk("\n"); +} + +#ifndef CONFIG_SIBYTE_BUS_WATCHER + +static void check_bus_watcher(void) +{ + uint32_t status, l2_err, memio_err; +#ifdef DUMP_L2_ECC_TAG_ON_ERROR + uint64_t l2_tag; +#endif + + /* Destructive read, clears register and interrupt */ + status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS)); + /* Bit 31 is always on, but there's no #define for that */ + if (status & ~(1UL << 31)) { + l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS)); +#ifdef DUMP_L2_ECC_TAG_ON_ERROR + l2_tag = in64(IOADDR(A_L2_ECC_TAG)); +#endif + memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); + printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); + printk("\nLast recorded signature:\n"); + printk("Request %02x from %d, answered by %d with Dcode %d\n", + (unsigned int)(G_SCD_BERR_TID(status) & 0x3f), + (int)(G_SCD_BERR_TID(status) >> 6), + (int)G_SCD_BERR_RID(status), + (int)G_SCD_BERR_DCODE(status)); +#ifdef DUMP_L2_ECC_TAG_ON_ERROR + printk("Last L2 tag w/ bad ECC: %016llx\n", l2_tag); +#endif + } else { + printk("Bus watcher indicates no error\n"); + } +} +#else +extern void check_bus_watcher(void); +#endif + +asmlinkage void sb1_cache_error(void) +{ + uint32_t errctl, cerr_i, cerr_d, dpalo, dpahi, eepc, res; + unsigned long long cerr_dpa; + +#ifdef CONFIG_SIBYTE_BW_TRACE + /* Freeze the trace buffer now */ + csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG)); + printk("Trace buffer frozen\n"); +#endif + + printk("Cache error exception on CPU %x:\n", + (read_c0_prid() >> 25) & 0x7); + + __asm__ __volatile__ ( + " .set push\n\t" + " .set mips64\n\t" + " .set noat\n\t" + " mfc0 %0, $26\n\t" + " mfc0 %1, $27\n\t" + " mfc0 %2, $27, 1\n\t" + " dmfc0 $1, $27, 3\n\t" + " dsrl32 %3, $1, 0 \n\t" + " sll %4, $1, 0 \n\t" + " mfc0 %5, $30\n\t" + " .set pop" + : "=r" (errctl), "=r" (cerr_i), "=r" (cerr_d), + "=r" (dpahi), "=r" (dpalo), "=r" (eepc)); + + cerr_dpa = (((uint64_t)dpahi) << 32) | dpalo; + printk(" c0_errorepc == %08x\n", eepc); + printk(" c0_errctl == %08x", errctl); + breakout_errctl(errctl); + if (errctl & CP0_ERRCTL_ICACHE) { + printk(" c0_cerr_i == %08x", cerr_i); + breakout_cerri(cerr_i); + if (CP0_CERRI_IDX_VALID(cerr_i)) { + /* Check index of EPC, allowing for delay slot */ + if (((eepc & SB1_CACHE_INDEX_MASK) != (cerr_i & SB1_CACHE_INDEX_MASK)) && + ((eepc & SB1_CACHE_INDEX_MASK) != ((cerr_i & SB1_CACHE_INDEX_MASK) - 4))) + printk(" cerr_i idx doesn't match eepc\n"); + else { + res = extract_ic(cerr_i & SB1_CACHE_INDEX_MASK, + (cerr_i & CP0_CERRI_DATA) != 0); + if (!(res & cerr_i)) + printk("...didn't see indicated icache problem\n"); + } + } + } + if (errctl & CP0_ERRCTL_DCACHE) { + printk(" c0_cerr_d == %08x", cerr_d); + breakout_cerrd(cerr_d); + if (CP0_CERRD_DPA_VALID(cerr_d)) { + printk(" c0_cerr_dpa == %010llx\n", cerr_dpa); + if (!CP0_CERRD_IDX_VALID(cerr_d)) { + res = extract_dc(cerr_dpa & SB1_CACHE_INDEX_MASK, + (cerr_d & CP0_CERRD_DATA) != 0); + if (!(res & cerr_d)) + printk("...didn't see indicated dcache problem\n"); + } else { + if ((cerr_dpa & SB1_CACHE_INDEX_MASK) != (cerr_d & SB1_CACHE_INDEX_MASK)) + printk(" cerr_d idx doesn't match cerr_dpa\n"); + else { + res = extract_dc(cerr_d & SB1_CACHE_INDEX_MASK, + (cerr_d & CP0_CERRD_DATA) != 0); + if (!(res & cerr_d)) + printk("...didn't see indicated problem\n"); + } + } + } + } + + check_bus_watcher(); + + /* + * Calling panic() when a fatal cache error occurs scrambles the + * state of the system (and the cache), making it difficult to + * investigate after the fact. However, if you just stall the CPU, + * the other CPU may keep on running, which is typically very + * undesirable. + */ +#ifdef CONFIG_SB1_CERR_STALL + while (1) + ; +#else + panic("unhandled cache error"); +#endif +} + + +/* Parity lookup table. */ +static const uint8_t parity[256] = { + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1, + 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0 +}; + +/* Masks to select bits for Hamming parity, mask_72_64[i] for bit[i] */ +static const uint64_t mask_72_64[8] = { + 0x0738C808099264FFULL, + 0x38C808099264FF07ULL, + 0xC808099264FF0738ULL, + 0x08099264FF0738C8ULL, + 0x099264FF0738C808ULL, + 0x9264FF0738C80809ULL, + 0x64FF0738C8080992ULL, + 0xFF0738C808099264ULL +}; + +/* Calculate the parity on a range of bits */ +static char range_parity(uint64_t dword, int max, int min) +{ + char parity = 0; + int i; + dword >>= min; + for (i=max-min; i>=0; i--) { + if (dword & 0x1) + parity = !parity; + dword >>= 1; + } + return parity; +} + +/* Calculate the 4-bit even byte-parity for an instruction */ +static unsigned char inst_parity(uint32_t word) +{ + int i, j; + char parity = 0; + for (j=0; j<4; j++) { + char byte_parity = 0; + for (i=0; i<8; i++) { + if (word & 0x80000000) + byte_parity = !byte_parity; + word <<= 1; + } + parity <<= 1; + parity |= byte_parity; + } + return parity; +} + +static uint32_t extract_ic(unsigned short addr, int data) +{ + unsigned short way; + int valid; + uint32_t taghi, taglolo, taglohi; + unsigned long long taglo, va; + uint64_t tlo_tmp; + uint8_t lru; + int res = 0; + + printk("Icache index 0x%04x ", addr); + for (way = 0; way < 4; way++) { + /* Index-load-tag-I */ + __asm__ __volatile__ ( + " .set push \n\t" + " .set noreorder \n\t" + " .set mips64 \n\t" + " .set noat \n\t" + " cache 4, 0(%3) \n\t" + " mfc0 %0, $29 \n\t" + " dmfc0 $1, $28 \n\t" + " dsrl32 %1, $1, 0 \n\t" + " sll %2, $1, 0 \n\t" + " .set pop" + : "=r" (taghi), "=r" (taglohi), "=r" (taglolo) + : "r" ((way << 13) | addr)); + + taglo = ((unsigned long long)taglohi << 32) | taglolo; + if (way == 0) { + lru = (taghi >> 14) & 0xff; + printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", + ((addr >> 5) & 0x3), /* bank */ + ((addr >> 7) & 0x3f), /* index */ + (lru & 0x3), + ((lru >> 2) & 0x3), + ((lru >> 4) & 0x3), + ((lru >> 6) & 0x3)); + } + va = (taglo & 0xC0000FFFFFFFE000ULL) | addr; + if ((taglo & (1 << 31)) && (((taglo >> 62) & 0x3) == 3)) + va |= 0x3FFFF00000000000ULL; + valid = ((taghi >> 29) & 1); + if (valid) { + tlo_tmp = taglo & 0xfff3ff; + if (((taglo >> 10) & 1) ^ range_parity(tlo_tmp, 23, 0)) { + printk(" ** bad parity in VTag0/G/ASID\n"); + res |= CP0_CERRI_TAG_PARITY; + } + if (((taglo >> 11) & 1) ^ range_parity(taglo, 63, 24)) { + printk(" ** bad parity in R/VTag1\n"); + res |= CP0_CERRI_TAG_PARITY; + } + } + if (valid ^ ((taghi >> 27) & 1)) { + printk(" ** bad parity for valid bit\n"); + res |= CP0_CERRI_TAG_PARITY; + } + printk(" %d [VA %016llx] [Vld? %d] raw tags: %08X-%016llX\n", + way, va, valid, taghi, taglo); + + if (data) { + uint32_t datahi, insta, instb; + uint8_t predecode; + int offset; + + /* (hit all banks and ways) */ + for (offset = 0; offset < 4; offset++) { + /* Index-load-data-I */ + __asm__ __volatile__ ( + " .set push\n\t" + " .set noreorder\n\t" + " .set mips64\n\t" + " .set noat\n\t" + " cache 6, 0(%3) \n\t" + " mfc0 %0, $29, 1\n\t" + " dmfc0 $1, $28, 1\n\t" + " dsrl32 %1, $1, 0 \n\t" + " sll %2, $1, 0 \n\t" + " .set pop \n" + : "=r" (datahi), "=r" (insta), "=r" (instb) + : "r" ((way << 13) | addr | (offset << 3))); + predecode = (datahi >> 8) & 0xff; + if (((datahi >> 16) & 1) != (uint32_t)range_parity(predecode, 7, 0)) { + printk(" ** bad parity in predecode\n"); + res |= CP0_CERRI_DATA_PARITY; + } + /* XXXKW should/could check predecode bits themselves */ + if (((datahi >> 4) & 0xf) ^ inst_parity(insta)) { + printk(" ** bad parity in instruction a\n"); + res |= CP0_CERRI_DATA_PARITY; + } + if ((datahi & 0xf) ^ inst_parity(instb)) { + printk(" ** bad parity in instruction b\n"); + res |= CP0_CERRI_DATA_PARITY; + } + printk(" %05X-%08X%08X", datahi, insta, instb); + } + printk("\n"); + } + } + return res; +} + +/* Compute the ECC for a data doubleword */ +static uint8_t dc_ecc(uint64_t dword) +{ + uint64_t t; + uint32_t w; + uint8_t p; + int i; + + p = 0; + for (i = 7; i >= 0; i--) + { + p <<= 1; + t = dword & mask_72_64[i]; + w = (uint32_t)(t >> 32); + p ^= (parity[w>>24] ^ parity[(w>>16) & 0xFF] + ^ parity[(w>>8) & 0xFF] ^ parity[w & 0xFF]); + w = (uint32_t)(t & 0xFFFFFFFF); + p ^= (parity[w>>24] ^ parity[(w>>16) & 0xFF] + ^ parity[(w>>8) & 0xFF] ^ parity[w & 0xFF]); + } + return p; +} + +struct dc_state { + unsigned char val; + char *name; +}; + +static struct dc_state dc_states[] = { + { 0x00, "INVALID" }, + { 0x0f, "COH-SHD" }, + { 0x13, "NCO-E-C" }, + { 0x19, "NCO-E-D" }, + { 0x16, "COH-E-C" }, + { 0x1c, "COH-E-D" }, + { 0xff, "*ERROR*" } +}; + +#define DC_TAG_VALID(state) \ + (((state) == 0x0) || ((state) == 0xf) || ((state) == 0x13) || \ + ((state) == 0x19) || ((state) == 0x16) || ((state) == 0x1c)) + +static char *dc_state_str(unsigned char state) +{ + struct dc_state *dsc = dc_states; + while (dsc->val != 0xff) { + if (dsc->val == state) + break; + dsc++; + } + return dsc->name; +} + +static uint32_t extract_dc(unsigned short addr, int data) +{ + int valid, way; + unsigned char state; + uint32_t taghi, taglolo, taglohi; + unsigned long long taglo, pa; + uint8_t ecc, lru; + int res = 0; + + printk("Dcache index 0x%04x ", addr); + for (way = 0; way < 4; way++) { + __asm__ __volatile__ ( + " .set push\n\t" + " .set noreorder\n\t" + " .set mips64\n\t" + " .set noat\n\t" + " cache 5, 0(%3)\n\t" /* Index-load-tag-D */ + " mfc0 %0, $29, 2\n\t" + " dmfc0 $1, $28, 2\n\t" + " dsrl32 %1, $1, 0\n\t" + " sll %2, $1, 0\n\t" + " .set pop" + : "=r" (taghi), "=r" (taglohi), "=r" (taglolo) + : "r" ((way << 13) | addr)); + + taglo = ((unsigned long long)taglohi << 32) | taglolo; + pa = (taglo & 0xFFFFFFE000ULL) | addr; + if (way == 0) { + lru = (taghi >> 14) & 0xff; + printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n", + ((addr >> 11) & 0x2) | ((addr >> 5) & 1), /* bank */ + ((addr >> 6) & 0x3f), /* index */ + (lru & 0x3), + ((lru >> 2) & 0x3), + ((lru >> 4) & 0x3), + ((lru >> 6) & 0x3)); + } + state = (taghi >> 25) & 0x1f; + valid = DC_TAG_VALID(state); + printk(" %d [PA %010llx] [state %s (%02x)] raw tags: %08X-%016llX\n", + way, pa, dc_state_str(state), state, taghi, taglo); + if (valid) { + if (((taglo >> 11) & 1) ^ range_parity(taglo, 39, 26)) { + printk(" ** bad parity in PTag1\n"); + res |= CP0_CERRD_TAG_ADDRESS; + } + if (((taglo >> 10) & 1) ^ range_parity(taglo, 25, 13)) { + printk(" ** bad parity in PTag0\n"); + res |= CP0_CERRD_TAG_ADDRESS; + } + } else { + res |= CP0_CERRD_TAG_STATE; + } + + if (data) { + uint32_t datalohi, datalolo, datahi; + unsigned long long datalo; + int offset; + char bad_ecc = 0; + + for (offset = 0; offset < 4; offset++) { + /* Index-load-data-D */ + __asm__ __volatile__ ( + " .set push\n\t" + " .set noreorder\n\t" + " .set mips64\n\t" + " .set noat\n\t" + " cache 7, 0(%3)\n\t" /* Index-load-data-D */ + " mfc0 %0, $29, 3\n\t" + " dmfc0 $1, $28, 3\n\t" + " dsrl32 %1, $1, 0 \n\t" + " sll %2, $1, 0 \n\t" + " .set pop" + : "=r" (datahi), "=r" (datalohi), "=r" (datalolo) + : "r" ((way << 13) | addr | (offset << 3))); + datalo = ((unsigned long long)datalohi << 32) | datalolo; + ecc = dc_ecc(datalo); + if (ecc != datahi) { + int bits; + bad_ecc |= 1 << (3-offset); + ecc ^= datahi; + bits = hweight8(ecc); + res |= (bits == 1) ? CP0_CERRD_DATA_SBE : CP0_CERRD_DATA_DBE; + } + printk(" %02X-%016llX", datahi, datalo); + } + printk("\n"); + if (bad_ecc) + printk(" dwords w/ bad ECC: %d %d %d %d\n", + !!(bad_ecc & 8), !!(bad_ecc & 4), + !!(bad_ecc & 2), !!(bad_ecc & 1)); + } + } + return res; +} |