Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 264 insertions, 0 deletions

diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
new file mode 100644
index 000000000..06ec304ad
--- /dev/null
+++ b/arch/mips/mm/sc-mips.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2006 Chris Dearman (chris@mips.com),
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/cpu-type.h>
+#include <asm/mipsregs.h>
+#include <asm/bcache.h>
+#include <asm/cacheops.h>
+#include <asm/page.h>
+#include <asm/mmu_context.h>
+#include <asm/r4kcache.h>
+#include <asm/mips-cps.h>
+#include <asm/bootinfo.h>
+
+/*
+ * MIPS32/MIPS64 L2 cache handling
+ */
+
+/*
+ * Writeback and invalidate the secondary cache before DMA.
+ */
+static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
+{
+	blast_scache_range(addr, addr + size);
+}
+
+/*
+ * Invalidate the secondary cache before DMA.
+ */
+static void mips_sc_inv(unsigned long addr, unsigned long size)
+{
+	unsigned long lsize = cpu_scache_line_size();
+	unsigned long almask = ~(lsize - 1);
+
+	cache_op(Hit_Writeback_Inv_SD, addr & almask);
+	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
+	blast_inv_scache_range(addr, addr + size);
+}
+
+static void mips_sc_enable(void)
+{
+	/* L2 cache is permanently enabled */
+}
+
+static void mips_sc_disable(void)
+{
+	/* L2 cache is permanently enabled */
+}
+
+static void mips_sc_prefetch_enable(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return;
+
+	/*
+	 * If there is one or more L2 prefetch unit present then enable
+	 * prefetching for both code & data, for all ports.
+	 */
+	pftctl = read_gcr_l2_pft_control();
+	if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT) {
+		pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK;
+		pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK;
+		pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN;
+		write_gcr_l2_pft_control(pftctl);
+
+		set_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID |
+					 CM_GCR_L2_PFT_CONTROL_B_CEN);
+	}
+}
+
+static void mips_sc_prefetch_disable(void)
+{
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return;
+
+	clear_gcr_l2_pft_control(CM_GCR_L2_PFT_CONTROL_PFTEN);
+	clear_gcr_l2_pft_control_b(CM_GCR_L2_PFT_CONTROL_B_PORTID |
+				   CM_GCR_L2_PFT_CONTROL_B_CEN);
+}
+
+static bool mips_sc_prefetch_is_enabled(void)
+{
+	unsigned long pftctl;
+
+	if (mips_cm_revision() < CM_REV_CM2_5)
+		return false;
+
+	pftctl = read_gcr_l2_pft_control();
+	if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT))
+		return false;
+	return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN);
+}
+
+static struct bcache_ops mips_sc_ops = {
+	.bc_enable = mips_sc_enable,
+	.bc_disable = mips_sc_disable,
+	.bc_wback_inv = mips_sc_wback_inv,
+	.bc_inv = mips_sc_inv,
+	.bc_prefetch_enable = mips_sc_prefetch_enable,
+	.bc_prefetch_disable = mips_sc_prefetch_disable,
+	.bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
+};
+
+/*
+ * Check if the L2 cache controller is activated on a particular platform.
+ * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
+ * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
+ * cache being disabled.  However there is no guarantee for this to be
+ * true on all platforms.  In an act of stupidity the spec defined bits
+ * 12..15 as implementation defined so below function will eventually have
+ * to be replaced by a platform specific probe.
+ */
+static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
+{
+	unsigned int config2 = read_c0_config2();
+	unsigned int tmp;
+
+	/* Check the bypass bit (L2B) */
+	switch (current_cpu_type()) {
+	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+	case CPU_1074K:
+	case CPU_INTERAPTIV:
+	case CPU_PROAPTIV:
+	case CPU_P5600:
+	case CPU_BMIPS5000:
+	case CPU_QEMU_GENERIC:
+	case CPU_P6600:
+		if (config2 & (1 << 12))
+			return 0;
+	}
+
+	tmp = (config2 >> 4) & 0x0f;
+	if (0 < tmp && tmp <= 7)
+		c->scache.linesz = 2 << tmp;
+	else
+		return 0;
+	return 1;
+}
+
+static int mips_sc_probe_cm3(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned long cfg = read_gcr_l2_config();
+	unsigned long sets, line_sz, assoc;
+
+	if (cfg & CM_GCR_L2_CONFIG_BYPASS)
+		return 0;
+
+	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE;
+	sets >>= __ffs(CM_GCR_L2_CONFIG_SET_SIZE);
+	if (sets)
+		c->scache.sets = 64 << sets;
+
+	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE;
+	line_sz >>= __ffs(CM_GCR_L2_CONFIG_LINE_SIZE);
+	if (line_sz)
+		c->scache.linesz = 2 << line_sz;
+
+	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC;
+	assoc >>= __ffs(CM_GCR_L2_CONFIG_ASSOC);
+	c->scache.ways = assoc + 1;
+	c->scache.waysize = c->scache.sets * c->scache.linesz;
+	c->scache.waybit = __ffs(c->scache.waysize);
+
+	if (c->scache.linesz) {
+		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+		c->options |= MIPS_CPU_INCLUSIVE_CACHES;
+		return 1;
+	}
+
+	return 0;
+}
+
+static inline int mips_sc_probe(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned int config1, config2;
+	unsigned int tmp;
+
+	/* Mark as not present until probe completed */
+	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
+
+	if (mips_cm_revision() >= CM_REV_CM3)
+		return mips_sc_probe_cm3();
+
+	/* Ignore anything but MIPSxx processors */
+	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			      MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			      MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+			      MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)))
+		return 0;
+
+	/* Does this MIPS32/MIPS64 CPU have a config2 register? */
+	config1 = read_c0_config1();
+	if (!(config1 & MIPS_CONF_M))
+		return 0;
+
+	config2 = read_c0_config2();
+
+	if (!mips_sc_is_activated(c))
+		return 0;
+
+	tmp = (config2 >> 8) & 0x0f;
+	if (tmp <= 7)
+		c->scache.sets = 64 << tmp;
+	else
+		return 0;
+
+	tmp = (config2 >> 0) & 0x0f;
+	if (tmp <= 7)
+		c->scache.ways = tmp + 1;
+	else
+		return 0;
+
+	if (current_cpu_type() == CPU_XBURST) {
+		switch (mips_machtype) {
+		/*
+		 * According to config2 it would be 5-ways, but that is
+		 * contradicted by all documentation.
+		 */
+		case MACH_INGENIC_JZ4770:
+		case MACH_INGENIC_JZ4775:
+			c->scache.ways = 4;
+			break;
+
+		/*
+		 * According to config2 it would be 5-ways and 512-sets,
+		 * but that is contradicted by all documentation.
+		 */
+		case MACH_INGENIC_X1000:
+		case MACH_INGENIC_X1000E:
+			c->scache.sets = 256;
+			c->scache.ways = 4;
+			break;
+		}
+	}
+
+	c->scache.waysize = c->scache.sets * c->scache.linesz;
+	c->scache.waybit = __ffs(c->scache.waysize);
+
+	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
+
+	return 1;
+}
+
+int mips_sc_init(void)
+{
+	int found = mips_sc_probe();
+	if (found) {
+		mips_sc_enable();
+		mips_sc_prefetch_enable();
+		bcops = &mips_sc_ops;
+	}
+	return found;
+}