Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 348 insertions, 0 deletions

diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
new file mode 100644
index 000000000..7929bee91
--- /dev/null
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -0,0 +1,348 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <linux/interrupt.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/kernel_stat.h>
+
+#include <asm/errno.h>
+#include <asm/irq_regs.h>
+#include <asm/signal.h>
+#include <asm/io.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_int.h>
+#include <asm/sibyte/bcm1480_scd.h>
+
+#include <asm/sibyte/sb1250_uart.h>
+#include <asm/sibyte/sb1250.h>
+
+/*
+ * These are the routines that handle all the low level interrupt stuff.
+ * Actions handled here are: initialization of the interrupt map, requesting of
+ * interrupt lines by handlers, dispatching if interrupts to handlers, probing
+ * for interrupt lines
+ */
+
+#ifdef CONFIG_PCI
+extern unsigned long ht_eoi_space;
+#endif
+
+/* Store the CPU id (not the logical number) */
+int bcm1480_irq_owner[BCM1480_NR_IRQS];
+
+static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock);
+
+void bcm1480_mask_irq(int cpu, int irq)
+{
+	unsigned long flags, hl_spacing;
+	u64 cur_ints;
+
+	raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	hl_spacing = 0;
+	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+		hl_spacing = BCM1480_IMR_HL_SPACING;
+		irq -= BCM1480_NR_IRQS_HALF;
+	}
+	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	cur_ints |= (((u64) 1) << irq);
+	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+void bcm1480_unmask_irq(int cpu, int irq)
+{
+	unsigned long flags, hl_spacing;
+	u64 cur_ints;
+
+	raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
+	hl_spacing = 0;
+	if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
+		hl_spacing = BCM1480_IMR_HL_SPACING;
+		irq -= BCM1480_NR_IRQS_HALF;
+	}
+	cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	cur_ints &= ~(((u64) 1) << irq);
+	____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
+	raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+}
+
+#ifdef CONFIG_SMP
+static int bcm1480_set_affinity(struct irq_data *d, const struct cpumask *mask,
+				bool force)
+{
+	unsigned int irq_dirty, irq = d->irq;
+	int i = 0, old_cpu, cpu, int_on, k;
+	u64 cur_ints;
+	unsigned long flags;
+
+	i = cpumask_first_and(mask, cpu_online_mask);
+
+	/* Convert logical CPU to physical CPU */
+	cpu = cpu_logical_map(i);
+
+	/* Protect against other affinity changers and IMR manipulation */
+	raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
+
+	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
+	old_cpu = bcm1480_irq_owner[irq];
+	irq_dirty = irq;
+	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+		irq_dirty -= BCM1480_NR_IRQS_HALF;
+	}
+
+	for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
+		cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		int_on = !(cur_ints & (((u64) 1) << irq_dirty));
+		if (int_on) {
+			/* If it was on, mask it */
+			cur_ints |= (((u64) 1) << irq_dirty);
+			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		}
+		bcm1480_irq_owner[irq] = cpu;
+		if (int_on) {
+			/* unmask for the new CPU */
+			cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+			cur_ints &= ~(((u64) 1) << irq_dirty);
+			____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
+		}
+	}
+	raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************/
+
+static void disable_bcm1480_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static void enable_bcm1480_irq(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+
+static void ack_bcm1480_irq(struct irq_data *d)
+{
+	unsigned int irq_dirty, irq = d->irq;
+	u64 pending;
+	int k;
+
+	/*
+	 * If the interrupt was an HT interrupt, now is the time to
+	 * clear it.  NOTE: we assume the HT bridge was set up to
+	 * deliver the interrupts to all CPUs (which makes affinity
+	 * changing easier for us)
+	 */
+	irq_dirty = irq;
+	if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
+		irq_dirty -= BCM1480_NR_IRQS_HALF;
+	}
+	for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
+		pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
+						R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
+		pending &= ((u64)1 << (irq_dirty));
+		if (pending) {
+#ifdef CONFIG_SMP
+			int i;
+			for (i=0; i<NR_CPUS; i++) {
+				/*
+				 * Clear for all CPUs so an affinity switch
+				 * doesn't find an old status
+				 */
+				__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
+								R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+			}
+#else
+			__raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
+#endif
+
+			/*
+			 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
+			 * Pass 2, the LDT world may be edge-triggered, but
+			 * this EOI shouldn't hurt.  If they are
+			 * level-sensitive, the EOI is required.
+			 */
+#ifdef CONFIG_PCI
+			if (ht_eoi_space)
+				*(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
+#endif
+		}
+	}
+	bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
+}
+
+static struct irq_chip bcm1480_irq_type = {
+	.name = "BCM1480-IMR",
+	.irq_mask_ack = ack_bcm1480_irq,
+	.irq_mask = disable_bcm1480_irq,
+	.irq_unmask = enable_bcm1480_irq,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = bcm1480_set_affinity
+#endif
+};
+
+void __init init_bcm1480_irqs(void)
+{
+	int i;
+
+	for (i = 0; i < BCM1480_NR_IRQS; i++) {
+		irq_set_chip_and_handler(i, &bcm1480_irq_type,
+					 handle_level_irq);
+		bcm1480_irq_owner[i] = 0;
+	}
+}
+
+/*
+ *  init_IRQ is called early in the boot sequence from init/main.c.  It
+ *  is responsible for setting up the interrupt mapper and installing the
+ *  handler that will be responsible for dispatching interrupts to the
+ *  "right" place.
+ */
+/*
+ * For now, map all interrupts to IP[2].  We could save
+ * some cycles by parceling out system interrupts to different
+ * IP lines, but keep it simple for bringup.  We'll also direct
+ * all interrupts to a single CPU; we should probably route
+ * PCI and LDT to one cpu and everything else to the other
+ * to balance the load a bit.
+ *
+ * On the second cpu, everything is set to IP5, which is
+ * ignored, EXCEPT the mailbox interrupt.  That one is
+ * set to IP[2] so it is handled.  This is needed so we
+ * can do cross-cpu function calls, as required by SMP
+ */
+
+#define IMR_IP2_VAL	K_BCM1480_INT_MAP_I0
+#define IMR_IP3_VAL	K_BCM1480_INT_MAP_I1
+#define IMR_IP4_VAL	K_BCM1480_INT_MAP_I2
+#define IMR_IP5_VAL	K_BCM1480_INT_MAP_I3
+#define IMR_IP6_VAL	K_BCM1480_INT_MAP_I4
+
+void __init arch_init_irq(void)
+{
+	unsigned int i, cpu;
+	u64 tmp;
+	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
+		STATUSF_IP1 | STATUSF_IP0;
+
+	/* Default everything to IP2 */
+	/* Start with _high registers which has no bit 0 interrupt source */
+	for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) {	/* was I0 */
+		for (cpu = 0; cpu < 4; cpu++) {
+			__raw_writeq(IMR_IP2_VAL,
+				     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+								   R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
+		}
+	}
+
+	/* Now do _low registers */
+	for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
+		for (cpu = 0; cpu < 4; cpu++) {
+			__raw_writeq(IMR_IP2_VAL,
+				     IOADDR(A_BCM1480_IMR_REGISTER(cpu,
+								   R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
+		}
+	}
+
+	init_bcm1480_irqs();
+
+	/*
+	 * Map the high 16 bits of mailbox_0 registers to IP[3], for
+	 * inter-cpu messages
+	 */
+	/* Was I1 */
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
+						 (K_BCM1480_INT_MBOX_0_0 << 3)));
+	}
+
+
+	/* Clear the mailboxes.	 The firmware may leave them dirty */
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(0xffffffffffffffffULL,
+			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
+		__raw_writeq(0xffffffffffffffffULL,
+			     IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
+	}
+
+
+	/* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
+	tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
+	}
+	tmp = ~((u64) 0);
+	for (cpu = 0; cpu < 4; cpu++) {
+		__raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
+	}
+
+	/*
+	 * Note that the timer interrupts are also mapped, but this is
+	 * done in bcm1480_time_init().	 Also, the profiling driver
+	 * does its own management of IP7.
+	 */
+
+	/* Enable necessary IPs, disable the rest */
+	change_c0_status(ST0_IM, imask);
+}
+
+extern void bcm1480_mailbox_interrupt(void);
+
+static inline void dispatch_ip2(void)
+{
+	unsigned long long mask_h, mask_l;
+	unsigned int cpu = smp_processor_id();
+	unsigned long base;
+
+	/*
+	 * Default...we've hit an IP[2] interrupt, which means we've got to
+	 * check the 1480 interrupt registers to figure out what to do.	 Need
+	 * to detect which CPU we're on, now that smp_affinity is supported.
+	 */
+	base = A_BCM1480_IMR_MAPPER(cpu);
+	mask_h = __raw_readq(
+		IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
+	mask_l = __raw_readq(
+		IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
+
+	if (mask_h) {
+		if (mask_h ^ 1)
+			do_IRQ(fls64(mask_h) - 1);
+		else if (mask_l)
+			do_IRQ(63 + fls64(mask_l));
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int cpu = smp_processor_id();
+	unsigned int pending;
+
+	pending = read_c0_cause() & read_c0_status();
+
+	if (pending & CAUSEF_IP4)
+		do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
+#ifdef CONFIG_SMP
+	else if (pending & CAUSEF_IP3)
+		bcm1480_mailbox_interrupt();
+#endif
+
+	else if (pending & CAUSEF_IP2)
+		dispatch_ip2();
+}