Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 175 insertions, 0 deletions

diff --git a/arch/nios2/kernel/head.S b/arch/nios2/kernel/head.S
new file mode 100644
index 000000000..372ce4a33
--- /dev/null
+++ b/arch/nios2/kernel/head.S
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) 2009 Wind River Systems Inc
+ *   Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ * Copyright (C) 2001 Vic Phillips, Microtronix Datacom Ltd.
+ *
+ * Based on head.S for Altera's Excalibur development board with nios processor
+ *
+ * Based on the following from the Excalibur sdk distribution:
+ *	NA_MemoryMap.s, NR_JumpToStart.s, NR_Setup.s, NR_CWPManager.s
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/asm-macros.h>
+
+/*
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+	.space	PAGE_SIZE
+
+/*
+ * This global variable is used as an extension to the nios'
+ * STATUS register to emulate a user/supervisor mode.
+ */
+	.data
+	.align	2
+	.set noat
+
+	.global _current_thread
+_current_thread:
+	.long	0
+/*
+ * Input(s): passed from u-boot
+ *   r4 - Optional pointer to a board information structure.
+ *   r5 - Optional pointer to the physical starting address of the init RAM
+ *        disk.
+ *   r6 - Optional pointer to the physical ending address of the init RAM
+ *        disk.
+ *   r7 - Optional pointer to the physical starting address of any kernel
+ *        command-line parameters.
+ */
+
+/*
+ * First executable code - detected and jumped to by the ROM bootstrap
+ * if the code resides in flash (looks for "Nios" at offset 0x0c from
+ * the potential executable image).
+ */
+	__HEAD
+ENTRY(_start)
+	wrctl	status, r0		/* Disable interrupts */
+
+	/* Initialize all cache lines within the instruction cache */
+	movia	r1, NIOS2_ICACHE_SIZE
+	movui	r2, NIOS2_ICACHE_LINE_SIZE
+
+icache_init:
+	initi	r1
+	sub	r1, r1, r2
+	bgt	r1, r0, icache_init
+	br	1f
+
+	/*
+	 * This is the default location for the exception handler. Code in jump
+	 * to our handler
+	 */
+ENTRY(exception_handler_hook)
+	movia	r24, inthandler
+	jmp	r24
+
+ENTRY(fast_handler)
+	nextpc et
+helper:
+	stw	r3, r3save - helper(et)
+
+	rdctl	r3 , pteaddr
+	srli	r3, r3, 12
+	slli	r3, r3, 2
+	movia	et, pgd_current
+
+	ldw	et, 0(et)
+	add	r3, et, r3
+	ldw	et, 0(r3)
+
+	rdctl	r3, pteaddr
+	andi	r3, r3, 0xfff
+	add	et, r3, et
+	ldw	et, 0(et)
+	wrctl	tlbacc, et
+	nextpc	et
+helper2:
+	ldw	r3, r3save - helper2(et)
+	subi	ea, ea, 4
+	eret
+r3save:
+	.word 0x0
+ENTRY(fast_handler_end)
+
+1:
+	/*
+	 * After the instruction cache is initialized, the data cache must
+	 * also be initialized.
+	 */
+	movia	r1, NIOS2_DCACHE_SIZE
+	movui	r2, NIOS2_DCACHE_LINE_SIZE
+
+dcache_init:
+	initd	0(r1)
+	sub	r1, r1, r2
+	bgt	r1, r0, dcache_init
+
+	nextpc	r1			/* Find out where we are */
+chkadr:
+	movia	r2, chkadr
+	beq	r1, r2,finish_move	/* We are running in RAM done */
+	addi	r1, r1,(_start - chkadr)	/* Source */
+	movia	r2, _start		/* Destination */
+	movia	r3, __bss_start		/* End of copy */
+
+loop_move:				/* r1: src, r2: dest, r3: last dest */
+	ldw	r8, 0(r1)		/* load a word from [r1] */
+	stw	r8, 0(r2)		/* store a word to dest [r2] */
+	flushd	0(r2)			/* Flush cache for safety */
+	addi 	r1, r1, 4		/* inc the src addr */
+	addi	r2, r2, 4		/* inc the dest addr */
+	blt	r2, r3, loop_move
+
+	movia	r1, finish_move		/* VMA(_start)->l1 */
+	jmp	r1			/* jmp to _start */
+
+finish_move:
+
+	/* Mask off all possible interrupts */
+	wrctl	ienable, r0
+
+	/* Clear .bss */
+	movia	r2, __bss_start
+	movia	r1, __bss_stop
+1:
+	stb	r0, 0(r2)
+	addi	r2, r2, 1
+	bne	r1, r2, 1b
+
+	movia	r1, init_thread_union	/* set stack at top of the task union */
+	addi	sp, r1, THREAD_SIZE
+	movia	r2, _current_thread	/* Remember current thread */
+	stw	r1, 0(r2)
+
+	movia	r1, nios2_boot_init	/* save args r4-r7 passed from u-boot */
+	callr	r1
+
+	movia	r1, start_kernel	/* call start_kernel as a subroutine */
+	callr	r1
+
+	/* If we return from start_kernel, break to the oci debugger and
+	 * buggered we are.
+	 */
+	break
+
+	/* End of startup code */
+.set at