Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 347 insertions, 0 deletions

diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c
new file mode 100644
index 000000000..b4762d66e
--- /dev/null
+++ b/arch/openrisc/mm/fault.c
@@ -0,0 +1,347 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * OpenRISC fault.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/extable.h>
+#include <linux/sched/signal.h>
+#include <linux/perf_event.h>
+
+#include <linux/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define NUM_TLB_ENTRIES 64
+#define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1))
+
+/* __PHX__ :: - check the vmalloc_fault in do_page_fault()
+ *            - also look into include/asm/mmu_context.h
+ */
+volatile pgd_t *current_pgd[NR_CPUS];
+
+extern void __noreturn die(char *, struct pt_regs *, long);
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
+			      unsigned long vector, int write_acc)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct *vma;
+	int si_code;
+	vm_fault_t fault;
+	unsigned int flags = FAULT_FLAG_DEFAULT;
+
+	tsk = current;
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 *
+	 * NOTE2: This is done so that, when updating the vmalloc
+	 * mappings we don't have to walk all processes pgdirs and
+	 * add the high mappings all at once. Instead we do it as they
+	 * are used. However vmalloc'ed page entries have the PAGE_GLOBAL
+	 * bit set so sometimes the TLB can use a lingering entry.
+	 *
+	 * This verifies that the fault happens in kernel space
+	 * and that the fault was not a protection error.
+	 */
+
+	if (address >= VMALLOC_START &&
+	    (vector != 0x300 && vector != 0x400) &&
+	    !user_mode(regs))
+		goto vmalloc_fault;
+
+	/* If exceptions were enabled, we can reenable them here */
+	if (user_mode(regs)) {
+		/* Exception was in userspace: reenable interrupts */
+		local_irq_enable();
+		flags |= FAULT_FLAG_USER;
+	} else {
+		/* If exception was in a syscall, then IRQ's may have
+		 * been enabled or disabled.  If they were enabled,
+		 * reenable them.
+		 */
+		if (regs->sr && (SPR_SR_IEE | SPR_SR_TEE))
+			local_irq_enable();
+	}
+
+	mm = tsk->mm;
+	si_code = SEGV_MAPERR;
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+
+	if (in_interrupt() || !mm)
+		goto no_context;
+
+	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
+
+retry:
+	mmap_read_lock(mm);
+	vma = find_vma(mm, address);
+
+	if (!vma)
+		goto bad_area;
+
+	if (vma->vm_start <= address)
+		goto good_area;
+
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (user_mode(regs)) {
+		/*
+		 * accessing the stack below usp is always a bug.
+		 * we get page-aligned addresses so we can only check
+		 * if we're within a page from usp, but that might be
+		 * enough to catch brutal errors at least.
+		 */
+		if (address + PAGE_SIZE < regs->sp)
+			goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
+
+good_area:
+	si_code = SEGV_ACCERR;
+
+	/* first do some preliminary protection checks */
+
+	if (write_acc) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+		flags |= FAULT_FLAG_WRITE;
+	} else {
+		/* not present */
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+
+	/* are we trying to execute nonexecutable area */
+	if ((vector == 0x400) && !(vma->vm_page_prot.pgprot & _PAGE_EXEC))
+		goto bad_area;
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+
+	fault = handle_mm_fault(vma, address, flags, regs);
+
+	if (fault_signal_pending(fault, regs))
+		return;
+
+	/* The fault is fully completed (including releasing mmap lock) */
+	if (fault & VM_FAULT_COMPLETED)
+		return;
+
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGSEGV)
+			goto bad_area;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+
+	/*RGD modeled on Cris */
+	if (fault & VM_FAULT_RETRY) {
+		flags |= FAULT_FLAG_TRIED;
+
+		/* No need to mmap_read_unlock(mm) as we would
+		 * have already released it in __lock_page_or_retry
+		 * in mm/filemap.c.
+		 */
+
+		goto retry;
+	}
+
+	mmap_read_unlock(mm);
+	return;
+
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+
+bad_area:
+	mmap_read_unlock(mm);
+
+bad_area_nosemaphore:
+
+	/* User mode accesses just cause a SIGSEGV */
+
+	if (user_mode(regs)) {
+		force_sig_fault(SIGSEGV, si_code, (void __user *)address);
+		return;
+	}
+
+no_context:
+
+	/* Are we prepared to handle this kernel fault?
+	 *
+	 * (The kernel has valid exception-points in the source
+	 *  when it acesses user-memory. When it fails in one
+	 *  of those points, we find it in a table and do a jump
+	 *  to some fixup code that loads an appropriate error
+	 *  code)
+	 */
+
+	{
+		const struct exception_table_entry *entry;
+
+		if ((entry = search_exception_tables(regs->pc)) != NULL) {
+			/* Adjust the instruction pointer in the stackframe */
+			regs->pc = entry->fixup;
+			return;
+		}
+	}
+
+	/*
+	 * Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+
+	if ((unsigned long)(address) < PAGE_SIZE)
+		printk(KERN_ALERT
+		       "Unable to handle kernel NULL pointer dereference");
+	else
+		printk(KERN_ALERT "Unable to handle kernel access");
+	printk(" at virtual address 0x%08lx\n", address);
+
+	die("Oops", regs, write_acc);
+
+	/*
+	 * We ran out of memory, or some other thing happened to us that made
+	 * us unable to handle the page fault gracefully.
+	 */
+
+out_of_memory:
+	mmap_read_unlock(mm);
+	if (!user_mode(regs))
+		goto no_context;
+	pagefault_out_of_memory();
+	return;
+
+do_sigbus:
+	mmap_read_unlock(mm);
+
+	/*
+	 * Send a sigbus, regardless of whether we were in kernel
+	 * or user mode.
+	 */
+	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(regs))
+		goto no_context;
+	return;
+
+vmalloc_fault:
+	{
+		/*
+		 * Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 *
+		 * Use current_pgd instead of tsk->active_mm->pgd
+		 * since the latter might be unavailable if this
+		 * code is executed in a misfortunately run irq
+		 * (like inside schedule() between switch_mm and
+		 *  switch_to...).
+		 */
+
+		int offset = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+		p4d_t *p4d, *p4d_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+/*
+		phx_warn("do_page_fault(): vmalloc_fault will not work, "
+			 "since current_pgd assign a proper value somewhere\n"
+			 "anyhow we don't need this at the moment\n");
+
+		phx_mmu("vmalloc_fault");
+*/
+		pgd = (pgd_t *)current_pgd[smp_processor_id()] + offset;
+		pgd_k = init_mm.pgd + offset;
+
+		/* Since we're two-level, we don't need to do both
+		 * set_pgd and set_pmd (they do the same thing). If
+		 * we go three-level at some point, do the right thing
+		 * with pgd_present and set_pgd here.
+		 *
+		 * Also, since the vmalloc area is global, we don't
+		 * need to copy individual PTE's, it is enough to
+		 * copy the pgd pointer into the pte page of the
+		 * root task. If that is there, we'll find our pte if
+		 * it exists.
+		 */
+
+		p4d = p4d_offset(pgd, address);
+		p4d_k = p4d_offset(pgd_k, address);
+		if (!p4d_present(*p4d_k))
+			goto no_context;
+
+		pud = pud_offset(p4d, address);
+		pud_k = pud_offset(p4d_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
+
+		if (!pmd_present(*pmd_k))
+			goto bad_area_nosemaphore;
+
+		set_pmd(pmd, *pmd_k);
+
+		/* Make sure the actual PTE exists as well to
+		 * catch kernel vmalloc-area accesses to non-mapped
+		 * addresses. If we don't do this, this will just
+		 * silently loop forever.
+		 */
+
+		pte_k = pte_offset_kernel(pmd_k, address);
+		if (!pte_present(*pte_k))
+			goto no_context;
+
+		return;
+	}
+}