Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextgrafted

Pull networking updates from Jakub Kicinski:
 "Core:

   - Add dedicated kmem_cache for typical/small skb->head, avoid having
     to access struct page at kfree time, and improve memory use.

   - Introduce sysctl to set default RPS configuration for new netdevs.

   - Define Netlink protocol specification format which can be used to
     describe messages used by each family and auto-generate parsers.
     Add tools for generating kernel data structures and uAPI headers.

   - Expose all net/core sysctls inside netns.

   - Remove 4s sleep in netpoll if carrier is instantly detected on
     boot.

   - Add configurable limit of MDB entries per port, and port-vlan.

   - Continue populating drop reasons throughout the stack.

   - Retire a handful of legacy Qdiscs and classifiers.

  Protocols:

   - Support IPv4 big TCP (TSO frames larger than 64kB).

   - Add IP_LOCAL_PORT_RANGE socket option, to control local port range
     on socket by socket basis.

   - Track and report in procfs number of MPTCP sockets used.

   - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
     manager.

   - IPv6: don't check net.ipv6.route.max_size and rely on garbage
     collection to free memory (similarly to IPv4).

   - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).

   - ICMP: add per-rate limit counters.

   - Add support for user scanning requests in ieee802154.

   - Remove static WEP support.

   - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
     reporting.

   - WiFi 7 EHT channel puncturing support (client & AP).

  BPF:

   - Add a rbtree data structure following the "next-gen data structure"
     precedent set by recently added linked list, that is, by using
     kfunc + kptr instead of adding a new BPF map type.

   - Expose XDP hints via kfuncs with initial support for RX hash and
     timestamp metadata.

   - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
     better support decap on GRE tunnel devices not operating in collect
     metadata.

   - Improve x86 JIT's codegen for PROBE_MEM runtime error checks.

   - Remove the need for trace_printk_lock for bpf_trace_printk and
     bpf_trace_vprintk helpers.

   - Extend libbpf's bpf_tracing.h support for tracing arguments of
     kprobes/uprobes and syscall as a special case.

   - Significantly reduce the search time for module symbols by
     livepatch and BPF.

   - Enable cpumasks to be used as kptrs, which is useful for tracing
     programs tracking which tasks end up running on which CPUs in
     different time intervals.

   - Add support for BPF trampoline on s390x and riscv64.

   - Add capability to export the XDP features supported by the NIC.

   - Add __bpf_kfunc tag for marking kernel functions as kfuncs.

   - Add cgroup.memory=nobpf kernel parameter option to disable BPF
     memory accounting for container environments.

  Netfilter:

   - Remove the CLUSTERIP target. It has been marked as obsolete for
     years, and we still have WARN splats wrt races of the out-of-band
     /proc interface installed by this target.

   - Add 'destroy' commands to nf_tables. They are identical to the
     existing 'delete' commands, but do not return an error if the
     referenced object (set, chain, rule...) did not exist.

  Driver API:

   - Improve cpumask_local_spread() locality to help NICs set the right
     IRQ affinity on AMD platforms.

   - Separate C22 and C45 MDIO bus transactions more clearly.

   - Introduce new DCB table to control DSCP rewrite on egress.

   - Support configuration of Physical Layer Collision Avoidance (PLCA)
     Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
     shared medium Ethernet.

   - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
     preemption of low priority frames by high priority frames.

   - Add support for controlling MACSec offload using netlink SET.

   - Rework devlink instance refcounts to allow registration and
     de-registration under the instance lock. Split the code into
     multiple files, drop some of the unnecessarily granular locks and
     factor out common parts of netlink operation handling.

   - Add TX frame aggregation parameters (for USB drivers).

   - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
     messages with notifications for debug.

   - Allow offloading of UDP NEW connections via act_ct.

   - Add support for per action HW stats in TC.

   - Support hardware miss to TC action (continue processing in SW from
     a specific point in the action chain).

   - Warn if old Wireless Extension user space interface is used with
     modern cfg80211/mac80211 drivers. Do not support Wireless
     Extensions for Wi-Fi 7 devices at all. Everyone should switch to
     using nl80211 interface instead.

   - Improve the CAN bit timing configuration. Use extack to return
     error messages directly to user space, update the SJW handling,
     including the definition of a new default value that will benefit
     CAN-FD controllers, by increasing their oscillator tolerance.

  New hardware / drivers:

   - Ethernet:
      - nVidia BlueField-3 support (control traffic driver)
      - Ethernet support for imx93 SoCs
      - Motorcomm yt8531 gigabit Ethernet PHY
      - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
      - Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
      - Amlogic gxl MDIO mux

   - WiFi:
      - RealTek RTL8188EU (rtl8xxxu)
      - Qualcomm Wi-Fi 7 devices (ath12k)

   - CAN:
      - Renesas R-Car V4H

  Drivers:

   - Bluetooth:
      - Set Per Platform Antenna Gain (PPAG) for Intel controllers.

   - Ethernet NICs:
      - Intel (1G, igc):
         - support TSN / Qbv / packet scheduling features of i226 model
      - Intel (100G, ice):
         - use GNSS subsystem instead of TTY
         - multi-buffer XDP support
         - extend support for GPIO pins to E823 devices
      - nVidia/Mellanox:
         - update the shared buffer configuration on PFC commands
         - implement PTP adjphase function for HW offset control
         - TC support for Geneve and GRE with VF tunnel offload
         - more efficient crypto key management method
         - multi-port eswitch support
      - Netronome/Corigine:
         - add DCB IEEE support
         - support IPsec offloading for NFP3800
      - Freescale/NXP (enetc):
         - support XDP_REDIRECT for XDP non-linear buffers
         - improve reconfig, avoid link flap and waiting for idle
         - support MAC Merge layer
      - Other NICs:
         - sfc/ef100: add basic devlink support for ef100
         - ionic: rx_push mode operation (writing descriptors via MMIO)
         - bnxt: use the auxiliary bus abstraction for RDMA
         - r8169: disable ASPM and reset bus in case of tx timeout
         - cpsw: support QSGMII mode for J721e CPSW9G
         - cpts: support pulse-per-second output
         - ngbe: add an mdio bus driver
         - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
         - r8152: handle devices with FW with NCM support
         - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
         - virtio-net: support multi buffer XDP
         - virtio/vsock: replace virtio_vsock_pkt with sk_buff
         - tsnep: XDP support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add support for latency TLV (in FW control messages)
      - Microchip (sparx5):
         - separate explicit and implicit traffic forwarding rules, make
           the implicit rules always active
         - add support for egress DSCP rewrite
         - IS0 VCAP support (Ingress Classification)
         - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
           etc.)
         - ES2 VCAP support (Egress Access Control)
         - support for Per-Stream Filtering and Policing (802.1Q,
           8.6.5.1)

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - add MAB (port auth) offload support
         - enable PTP receive for mv88e6390
      - NXP (ocelot):
         - support MAC Merge layer
         - support for the the vsc7512 internal copper phys
      - Microchip:
         - lan9303: convert to PHYLINK
         - lan966x: support TC flower filter statistics
         - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
         - lan937x: support Credit Based Shaper configuration
         - ksz9477: support Energy Efficient Ethernet
      - other:
         - qca8k: convert to regmap read/write API, use bulk operations
         - rswitch: Improve TX timestamp accuracy

   - Intel WiFi (iwlwifi):
      - EHT (Wi-Fi 7) rate reporting
      - STEP equalizer support: transfer some STEP (connection to radio
        on platforms with integrated wifi) related parameters from the
        BIOS to the firmware.

   - Qualcomm 802.11ax WiFi (ath11k):
      - IPQ5018 support
      - Fine Timing Measurement (FTM) responder role support
      - channel 177 support

   - MediaTek WiFi (mt76):
      - per-PHY LED support
      - mt7996: EHT (Wi-Fi 7) support
      - Wireless Ethernet Dispatch (WED) reset support
      - switch to using page pool allocator

   - RealTek WiFi (rtw89):
      - support new version of Bluetooth co-existance

   - Mobile:
      - rmnet: support TX aggregation"

* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
  page_pool: add a comment explaining the fragment counter usage
  net: ethtool: fix __ethtool_dev_mm_supported() implementation
  ethtool: pse-pd: Fix double word in comments
  xsk: add linux/vmalloc.h to xsk.c
  sefltests: netdevsim: wait for devlink instance after netns removal
  selftest: fib_tests: Always cleanup before exit
  net/mlx5e: Align IPsec ASO result memory to be as required by hardware
  net/mlx5e: TC, Set CT miss to the specific ct action instance
  net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
  net/mlx5: Refactor tc miss handling to a single function
  net/mlx5: Kconfig: Make tc offload depend on tc skb extension
  net/sched: flower: Support hardware miss to tc action
  net/sched: flower: Move filter handle initialization earlier
  net/sched: cls_api: Support hardware miss to tc action
  net/sched: Rename user cookie and act cookie
  sfc: fix builds without CONFIG_RTC_LIB
  sfc: clean up some inconsistent indentings
  net/mlx4_en: Introduce flexible array to silence overflow warning
  net: lan966x: Fix possible deadlock inside PTP
  net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
  ...

1 files changed, 195 insertions, 0 deletions

diff --git a/arch/parisc/kernel/vdso32/sigtramp.S b/arch/parisc/kernel/vdso32/sigtramp.S
new file mode 100644
index 000000000..192da7077
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/sigtramp.S
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Signal trampolines for 32 bit processes.
+ *
+ * Copyright (C) 2006 Randolph Chung <tausq@debian.org>
+ * Copyright (C) 2018-2022 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2022 John David Anglin <dave.anglin@bell.net>
+ */
+#include <asm/unistd.h>
+#include <linux/linkage.h>
+#include <generated/asm-offsets.h>
+
+	.text
+
+/* Gdb expects the trampoline is on the stack and the pc is offset from
+   a 64-byte boundary by 0, 4 or 5 instructions. Since the vdso trampoline
+   is not on the stack, we need a new variant with different offsets and
+   data to tell gdb where to find the signal context on the stack.
+
+   Here we put the offset to the context data at the start of the trampoline
+   region and offset the first trampoline by 2 instructions. Please do
+   not change the trampoline as the code in gdb depends on the following
+   instruction sequence exactly.
+ */
+	.align 64
+	.word SIGFRAME_CONTEXT_REGS32
+
+/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from
+   the return address to get an address in the middle of the presumed
+   call instruction. Since we don't have a call here, we artifically
+   extend the range covered by the unwind info by adding a nop before
+   the real start.
+ */
+	nop
+
+	.globl __kernel_sigtramp_rt
+	.type __kernel_sigtramp_rt, @function
+__kernel_sigtramp_rt:
+	.proc
+	.callinfo FRAME=ASM_SIGFRAME_SIZE32,CALLS,SAVE_RP
+	.entry
+
+.Lsigrt_start = . - 4
+0:	ldi	0, %r25			/* (in_syscall=0) */
+	ldi  __NR_rt_sigreturn, %r20
+	ble  0x100(%sr2, %r0)
+	nop
+
+1:	ldi	1, %r25			/* (in_syscall=1) */
+	ldi  __NR_rt_sigreturn, %r20
+	ble  0x100(%sr2, %r0)
+	nop
+.Lsigrt_end:
+	.exit
+	.procend
+	.size __kernel_sigtramp_rt,.-__kernel_sigtramp_rt
+
+
+	.section .eh_frame,"a",@progbits
+
+/* This is where the mcontext_t struct can be found on the stack.  */
+#define PTREGS SIGFRAME_CONTEXT_REGS32	/* 32-bit process offset is -672 */
+
+/* Register REGNO can be found at offset OFS of the mcontext_t structure. */
+	.macro rsave regno,ofs
+	.byte 0x05		/* DW_CFA_offset_extended */
+	.uleb128 \regno;	/*   regno */
+	.uleb128 \ofs		/*   factored offset */
+	.endm
+
+.Lcie:
+	.long .Lcie_end - .Lcie_start
+.Lcie_start:
+	.long 0			/* CIE ID */
+	.byte 1			/* Version number */
+	.stringz "zRS"		/* NUL-terminated augmentation string */
+	.uleb128 4		/* Code alignment factor */
+	.sleb128 4		/* Data alignment factor */
+	.byte 89		/* Return address register column, iaoq[0] */
+	.uleb128 1		/* Augmentation value length */
+	.byte 0x1b		/* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
+	.byte 0x0f		/* DW_CFA_def_cfa_expresion */
+	.uleb128 9f - 1f	/*   length */
+1:
+	.byte 0x8e		/*   DW_OP_breg30 */
+	.sleb128 PTREGS
+9:
+	.balign 4
+.Lcie_end:
+
+	.long .Lfde0_end - .Lfde0_start
+.Lfde0_start:
+	.long .Lfde0_start - .Lcie	/* CIE pointer. */
+	.long .Lsigrt_start - .		/* PC start, length */
+	.long .Lsigrt_end - .Lsigrt_start
+	.uleb128 0			/* Augmentation */
+
+	/* General registers */
+	rsave  1,  2
+	rsave  2,  3
+	rsave  3,  4
+	rsave  4,  5
+	rsave  5,  6
+	rsave  6,  7
+	rsave  7,  8
+	rsave  8,  9
+	rsave  9, 10
+	rsave 10, 11
+	rsave 11, 12
+	rsave 12, 13
+	rsave 13, 14
+	rsave 14, 15
+	rsave 15, 16
+	rsave 16, 17
+	rsave 17, 18
+	rsave 18, 19
+	rsave 19, 20
+	rsave 20, 21
+	rsave 21, 22
+	rsave 22, 23
+	rsave 23, 24
+	rsave 24, 25
+	rsave 25, 26
+	rsave 26, 27
+	rsave 27, 28
+	rsave 28, 29
+	rsave 29, 30
+	rsave 30, 31
+	rsave 31, 32
+
+	/* Floating-point registers */
+	rsave 32, 42
+	rsave 33, 43
+	rsave 34, 44
+	rsave 35, 45
+	rsave 36, 46
+	rsave 37, 47
+	rsave 38, 48
+	rsave 39, 49
+	rsave 40, 50
+	rsave 41, 51
+	rsave 42, 52
+	rsave 43, 53
+	rsave 44, 54
+	rsave 45, 55
+	rsave 46, 56
+	rsave 47, 57
+	rsave 48, 58
+	rsave 49, 59
+	rsave 50, 60
+	rsave 51, 61
+	rsave 52, 62
+	rsave 53, 63
+	rsave 54, 64
+	rsave 55, 65
+	rsave 56, 66
+	rsave 57, 67
+	rsave 58, 68
+	rsave 59, 69
+	rsave 60, 70
+	rsave 61, 71
+	rsave 62, 72
+	rsave 63, 73
+	rsave 64, 74
+	rsave 65, 75
+	rsave 66, 76
+	rsave 67, 77
+	rsave 68, 78
+	rsave 69, 79
+	rsave 70, 80
+	rsave 71, 81
+	rsave 72, 82
+	rsave 73, 83
+	rsave 74, 84
+	rsave 75, 85
+	rsave 76, 86
+	rsave 77, 87
+	rsave 78, 88
+	rsave 79, 89
+	rsave 80, 90
+	rsave 81, 91
+	rsave 82, 92
+	rsave 83, 93
+	rsave 84, 94
+	rsave 85, 95
+	rsave 86, 96
+	rsave 87, 97
+
+	/* SAR register */
+	rsave 88, 102
+
+	/* iaoq[0] return address register */
+	rsave 89, 100
+	.balign 4
+.Lfde0_end: